Panasonic DP-2500 Service Manual ▷ View online
49
< For Europe only >
(9) 2 Screws (7B)
(10) Remove the EMI Sheet (128).
(11) Remove the Battery Holder (105) Assembly.
(12) Disconnect Connector CN69 on the PNL2 PC
Board.
(13) 9 Screws (7B).
Note:
Remove 7 Screws for Europe.
(14) Remove the PNL2 PC Board (19121).
(15) 3 Screws (7B).
(16) Remove the Control Panel Cover (101).
(16) Remove the Control Panel Cover (101).
(17) 1 Screw (7B).
(18) 1 Screw (2K).
(19) Remove the LCD Module (124).
(18) 1 Screw (2K).
(19) Remove the LCD Module (124).
(9)
(9)
(10)
(11)
(13)x9
(14)
(12)
(16)
(15)
(15)
(19)
(17)
(18)
50
(20) Remove the Insulation Sheet (127).
(21) Remove the Touch Panel (123).
(21) Remove the Touch Panel (123).
(22) Remove the PNL3 PC Board (19125).
(23) Release 2 Latch Hooks.
(24) Remove the Slide Switch Lever (112).
(24) Remove the Slide Switch Lever (112).
(21)
(20)
(22)
(23)
(24)
51
2.2.4.
Optional Low Voltage PSU, HTC PC Board, Fan, Speaker, Low Voltage PSU, LCU/
LCE PC Board, LANC PC Board, FXB PC Board, G3B PC Board, LANB PC Board,
SORT PC Board, PRI PC Board, EP PC Board Assembly, LPC PC Board, SC PC
Board, Switch Holder, HTC 2 PC Board
LCE PC Board, LANC PC Board, FXB PC Board, G3B PC Board, LANB PC Board,
SORT PC Board, PRI PC Board, EP PC Board Assembly, LPC PC Board, SC PC
Board, Switch Holder, HTC 2 PC Board
(1) Remove all Covers. (Refer to 2.2.2.)
(2) 4 Screws (19).
(3) Remove the LVPS Plate (409).
(2) 4 Screws (19).
(3) Remove the LVPS Plate (409).
< When 1-Bin Finisher is installed >
(4) Disconnect Connectors CN64, CN65 and CN66
on the Optional Low Voltage PSU.
(5) Remove 2 Screws (19) and the Optional Low
Voltage PSU Assembly.
(6) Remove 4 Screws (19) and the Optional Low
Voltage PSU (19130).
(7) Disconnect all Connectors on the HTC PC Board.
Note:
When re-connecting, ensure that the single
Black wire Connector is connected to CN760
and the double-wire connector is connected to
CN764 with the Black wire facing downwards.
Black wire Connector is connected to CN760
and the double-wire connector is connected to
CN764 with the Black wire facing downwards.
(8) 2 Screws (19).
(9) Release 2 Locking Spacers (307).
(9) Release 2 Locking Spacers (307).
(10) Remove the HTC PC Board (1997).
(11) 2 Screws (19).
(12) Remove the FS Bracket (427).
(2)
(2)
(3)
(5)
(6)
(6)
(4)
(5)
(6)
(8)
(7)
(10)
(9)
(9)
(11)
(12)
52
(13) 2 Screws (E6).
(14) Remove the Fan (1126).
(15) Disconnect the Fan Connector.
(14) Remove the Fan (1126).
(15) Disconnect the Fan Connector.
<If FAX Communication Kit is installed>
(16) 1 Screw (19).
(17) Remove the Speaker Bracket (429).
(18) Remove the Speaker (448) Assembly and
(17) Remove the Speaker Bracket (429).
(18) Remove the Speaker (448) Assembly and
disconnect the Connector.
(19) Remove all Connectors on the Low Voltage PSU.
(20) 3 Screws (19).
(21) 4 Screws (19).
(22) Remove the Low Voltage PSU (1999).
(20) 3 Screws (19).
(21) 4 Screws (19).
(22) Remove the Low Voltage PSU (1999).
(23) Remove 7 Screws (19).
(24) Open the Rear Cover (417) Assembly.
(24) Open the Rear Cover (417) Assembly.
(13)
(13)
(14)
(15)
(16)
(18)
(17)
(18)
(19)
(22)
(20)
x3
(21)
(21)
(19)
(23)
x7
x7
(24)
Click on the first or last page to see other DP-2500 service manuals if exist.