Panasonic TH-103PF12W / TH-103PF12T Service Manual ▷ View online
45
TH-103PF12W / TH-103PF12T
9.37.2. Removal of V1-Board and V3-Board
1. Remove 1 screw (P).
2. Disconnect the connector (V1) and then remove V1-
2. Disconnect the connector (V1) and then remove V1-
Board.
3. Remove 1 screw (Q).
4. Disconnect the connector (V3) and then remove V3-
4. Disconnect the connector (V3) and then remove V3-
Board.
9.37.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V3-Board.
(Refer to Removal of V1-Board and V3-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove 20 screws and then remove the Cabinet Joint
Metals (B, BS).
5. Remove 8 screws.
6. Remove the Cabinet Joint Metals (A, AS) and Cabinet
6. Remove the Cabinet Joint Metals (A, AS) and Cabinet
(left, right, upper, lower)
46
TH-103PF12W / TH-103PF12T
Note: when Cabinet or Front Glass is exchanged
• You need new AL Tape kit when you exchange the Cab-
inet or Front Glass.
Note: when Cabinet is exchanged
• Paste the felts and Gaskets in order along each Fixed
Angles (left, right, upper, lower).
• Make sure the felts do not protrude from the edge of the
cabinet.
Note
• The felts are parts which cannot be recycled. Please use
the new article when you exchange the Cabinet.
9.38. Removal of Plasma Display
Panel
The C1 (upper, lower), C2 (upper, lower), C3 (upper, lower),
C4 (upper, lower), C5 (upper, lower), C6 (upper, lower), SS,
SS2, SS3, SC, SU, SM, SD Boards, and flexible cables
between D-C Boards and D-SC Boards, are connected with
the Plasma Display Panel for the repair.
C4 (upper, lower), C5 (upper, lower), C6 (upper, lower), SS,
SS2, SS3, SC, SU, SM, SD Boards, and flexible cables
between D-C Boards and D-SC Boards, are connected with
the Plasma Display Panel for the repair.
1. Remove the Rear Covers.
(Refer to Removal of Rear Cover)
2. Disconnect the connectors (DS15, P34).
47
TH-103PF12W / TH-103PF12T
3. Remove 2 screws ( ).
4. Remove 2 screws ( ) and then slide the Side Power Unit
4. Remove 2 screws ( ) and then slide the Side Power Unit
upward.
5. Remove the Side Power Unit.
6. Remove 24 screws and then remove Cabinet Block.
7. Pull the bottom of the Cabinet Block forward and lift.
8. Remove the Cabinet Block.
8. Remove the Cabinet Block.
9. Remove each 4 screws (R) of the Plates.
10. Remove 3 Eye Bolts.
11. Remove 6 Eye Bolt Covers.
12. Remove 4 screws and then remove the Rear Cover
Angles (H).
48
TH-103PF12W / TH-103PF12T
13. Remove 6 screws ( ).
14. Remove 4 screws ( ) and then remove the Rear Cover
14. Remove 4 screws ( ) and then remove the Rear Cover
Angles (upper_center, lower_center).
15. Disconnect the Fan Relay Connectors.
16. Remove 26 screws and then remove the Fan Blocks (1,
16. Remove 26 screws and then remove the Fan Blocks (1,
2, 3, 4, 5, 6, 7).
17. Disconnect the connectors (DN3, DN5, DN9).
18. Remove the flexible cables from the connectors (DN1,
18. Remove the flexible cables from the connectors (DN1,
DN2).
19. Remove 5 screws and then remove the DN-Board and
Fixed Plate.
20. Disconnect the connector (H51).
21. Remove 2 screws and then remove H5-Borad Block.
21. Remove 2 screws and then remove H5-Borad Block.
Click on the first or last page to see other TH-103PF12W / TH-103PF12T service manuals if exist.