Panasonic TH-103PF12W / TH-103PF12T Service Manual ▷ View online
29
TH-103PF12W / TH-103PF12T
4. Disconnect the connector (DS14).
5. Remove 10 screws and then remove the Fixed Plate
5. Remove 10 screws and then remove the Fixed Plate
6. Disconnect the connectors (DS2, DS4, DS6, DS9, DS15).
7. Remove the flexible cables from the connectors(DS1,
7. Remove the flexible cables from the connectors(DS1,
DS3).
8. Remove 3 screws and then remove DS-Board.
9.8.
Removal of HX-Board
1. Remove the Slot Case.
(Refer to Removal of DS-Board)
2. Disconnect the connector (HX1).
3. Remove 4 Hexagonal-Head screws and 2 screws and
3. Remove 4 Hexagonal-Head screws and 2 screws and
then remove HX-Board.
9.9.
Removal of DN-Board
Check that no bright points appears by Ve Life adjustment
after both D and DN board exchange.
after both D and DN board exchange.
1. Disconnect the connectors (DN3, DN5, DN9).
2. Remove the flexible cables from the connectors (DN1,
2. Remove the flexible cables from the connectors (DN1,
DN2)
3. Remove 4 screws and then remove DN-Board.
Note:
A re-setup of the destination is performed by MS
mode after DN-Board exchange.
mode after DN-Board exchange.
30
TH-103PF12W / TH-103PF12T
9.10. Removal of PB-Board
1. Disconnect the connectors (PB30, PB31, PB51, PB53,
PB54, PB59, PB61, PB62, PB67, PB69, PB71).
2. Remove 4 screws and then remove PB-Board.
9.11. Removal of D-Board
Check that no bright points appears by Ve Life adjustment
after both D and DN board exchange.
after both D and DN board exchange.
1. Remove Duct Barrier K.
2. Disconnect the connectors (D3, D5, D21, D25).
3. Remove the flexible cables from the connectors (D20,
3. Remove the flexible cables from the connectors (D20,
D31, D32, D33, D34).
4. Remove 4 screws and then remove D-Board.
9.12. Removal of P-Board (MAIN_1)
1. Disconnect the connectors (CM1, CM2, CM3, CM4, CM5,
P2, P6, P35).
2. Remove 10 screws and then remove P-Board (MAIN_1).
31
TH-103PF12W / TH-103PF12T
9.13. Removal of P-Board (MAIN_2)
1. Disconnect the connectors (CM1, CM2, CM3, CM4, P6,
P11, P35).
2. Remove 10 screws and then remove P-Board (MAIN_2).
9.14. Removal of P-Board (SUB)
1. Disconnect the connectors (CS1, CS2, CS3, CS4, CS5,
CS6, CS7, CS8, CS9, P7, P9, P25, P34).
2. Remove 9 screws and then remove P-Board (SUB).
9.15. Removal of S1-Board and V2-
Board
1. Remove 2 screws ( ).
2. Remove 2 screws ( ) and then slide the Side Power Unit
2. Remove 2 screws ( ) and then slide the Side Power Unit
upward.
3. Remove the Side Power Unit.
9.15.1. Removal of S1-Board
1. Remove 2 screws (L) and then remove the Power Button
Bracket.
2. Remove 1 screw (M).
3. Disconnect the connector (S34) and then remove S1-
3. Disconnect the connector (S34) and then remove S1-
Board.
4. Remove 2 hooks and then remove the Power Button and
Power Button Spring.
32
TH-103PF12W / TH-103PF12T
9.15.2. Removal of V2-Board
1. Remove 4 screw (N) and then remove the Side Power
Cover.
2. Disconnect the connector (V15) and then remove V2-
Board.
3. Remove 2 hooks and then remove the 5 Range Button
from V2-Board.
9.16. Removal of SU-Board
1. Remove the Side Angle (R).
(Refer to Removal of the Side Angle (R))
2. Remove 3 screws ( ).
3. Remove 3 screws ( ) and then remove the Reinforce-
3. Remove 3 screws ( ) and then remove the Reinforce-
ment Angle (upper_right).
4. Disconnect the Fan relay connectors.
5. Remove 4 screws and then remove the Fan Block (2, 3).
5. Remove 4 screws and then remove the Fan Block (2, 3).
6. Remove 1 screw ( ).
7. Remove 4 screws ( ) and then remove the Side M16
7. Remove 4 screws ( ) and then remove the Side M16
Block.
8. Remove the Duct Barrier E and Duct Barrier F.
9. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU11).
Click on the first or last page to see other TH-103PF12W / TH-103PF12T service manuals if exist.