Panasonic TH-103PF12W / TH-103PF12T Service Manual ▷ View online
33
TH-103PF12W / TH-103PF12T
10. Disconnect the connector (SU43).
11. Remove 5 screws ( ).
12. Remove 3 screws ( ) and then remove SU-Board.
9.17. Removal of SM-Board
1. Remove the Side Angle (R).
(Refer to Removal of the Side Angle (R))
2. Disconnect the Fan relay connectors.
3. Remove 4 screws and then remove the Fan Block (1, 2).
3. Remove 4 screws and then remove the Fan Block (1, 2).
4. Remove the flexible cables from the connectors (SM1,
SM2, SM3, SM4, SM11, SM12).
5. Disconnect the connectors (SM41, SM42, SM46)
6. Remove 6 screws ( ).
7. Remove 4 screws ( ) and then remove SM-Board.
6. Remove 6 screws ( ).
7. Remove 4 screws ( ) and then remove SM-Board.
9.18. Removal of SD-Board
34
TH-103PF12W / TH-103PF12T
1. Remove the Side Angle (R).
(Refer to Removal of the Side Angle (R))
2. Remove 3 screws ( ).
3. Remove 3 screws ( ) and then remove the Reinforce-
3. Remove 3 screws ( ) and then remove the Reinforce-
ment Angle (lower_right).
4. Disconnect the Fan relay connectors.
5. Remove 2 screws and then remove the Fan Block (1).
5. Remove 2 screws and then remove the Fan Block (1).
6. Remove 1 screw ( ).
7. Remove 4 screws ( ) and then remove the Side M16
7. Remove 4 screws ( ) and then remove the Side M16
Block.
8. Remove the flexible cables from the connectors (SD1,
SD2, SD3, SD4, SD12).
9. Disconnect the connector (SD44).
10. Remove 5 screws ( ).
11. Remove 3 screws ( ) and then remove SD-Board.
9.19. Removal of SC-Board
35
TH-103PF12W / TH-103PF12T
1. Remove SU-Board.
(Refer to Removal of SU-Board)
2. Remove SD-Board.
(Refer to Removal of SD-Board)
3. Disconnect the connectors (SM41, SM42, SM46).
4. Remove 6 screws ( ).
5. Remove 4 screws ( ) and then turn over SM-Board to the
4. Remove 6 screws ( ).
5. Remove 4 screws ( ) and then turn over SM-Board to the
left.
Note:
Note:
Do not damage the Flexible Cables of SM-Board, and
the parts on SC-Board.
the parts on SC-Board.
6. Disconnect the connector (SC2).
7. Remove the flexible cable from the connector (SC20).
8. Remove 9 screws and then remove SC-Board.
7. Remove the flexible cable from the connector (SC20).
8. Remove 9 screws and then remove SC-Board.
9.20. Removal of SS2-Board
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Disconnect the Fan relay connector.
3. Remove 3 screws and then remove the Fan Block (5).
3. Remove 3 screws and then remove the Fan Block (5).
4. Remove 4 screws ( ).
5. Remove 2 screws ( ) and then remove the Reinforce-
5. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (upper_left).
36
TH-103PF12W / TH-103PF12T
6. Disconnect the connectors (SS34, SS35).
7. Remove the flexible cables from the connectors (SS51,
7. Remove the flexible cables from the connectors (SS51,
SS52, SS53, SS54).
8. Remove 6 screws and then remove SS2-Board.
9.21. Removal of SS3-Board
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Remove 4 screws ( ).
3. Remove 2 screws ( ) and then remove the Reinforce-
3. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (lower_left).
4. Disconnect the connectors (SS32, SS33).
5. Remove the flexible cables from the connectors (SS59,
5. Remove the flexible cables from the connectors (SS59,
SS60, SS61, SS62).
6. Remove 6 screws and then remove SS3-Board.
9.22. Removal of SS-Board
Ve adjustment is performed by IIC mode after SS board
exchange.
exchange.
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Disconnect the Fan relay connector.
3. Remove 2 screws and then remove the Fan Block (7).
4. Remove the Duct Barrier H.
3. Remove 2 screws and then remove the Fan Block (7).
4. Remove the Duct Barrier H.
Click on the first or last page to see other TH-103PF12W / TH-103PF12T service manuals if exist.