Panasonic TH-103PF12W / TH-103PF12T Service Manual ▷ View online
37
TH-103PF12W / TH-103PF12T
5. Disconnect the connectors (SS11, SS21, SS32, SS33,
SS34, SS35).
6. Remove the flexible cables from the connectors (SS55,
SS56, SS57, SS58).
7. Remove 13 screws and then remove SS-Board.
9.23. Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 26 screws and then remove the Fan Blocks (1,
2. Remove 26 screws and then remove the Fan Blocks (1,
2, 3, 4, 5, 6, 7).
3. Remove each 4 screws and then remove the Fan (A, B,
C, D, E, F, G, H, J).
38
TH-103PF12W / TH-103PF12T
4. Reassemble the Fans in reverse order.
5. Stick the Fan Sponge around the Fan.
5. Stick the Fan Sponge around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
Please use a new one when Fan exchange.
9.24. Removal of C1-Board (upper)
1. Remove the Reinforcement Angle (upper_right).
(Refer to Removal of SU-Board)
2. Remove the flexible cable from the connector (C11).
3. Remove 4 screws ( ) and then remove the flexible
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2).
4. Remove 4 screws ( ) and then remove C1-Board
(upper).
9.25. Removal of C2-Board (upper)
1. Remove the Reinforcement Angle (upper_right).
(Refer to Removal of SU-Board)
2. Remove the flexible cables from the connectors (C20,
C21).
3. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA3, CA4, CA5).
4. Remove 6 screws ( ) and then remove C2-Board
(upper).
39
TH-103PF12W / TH-103PF12T
9.26. Removal of C3-Board (upper)
1. Remove the Eye Bolt (center).
2. Remove 3 screws ( ).
3. Remove 2 screws ( ) and then remove the Rear Cover
2. Remove 3 screws ( ).
3. Remove 2 screws ( ) and then remove the Rear Cover
Angle (upper_center).
4. Remove the Fan Block (4).
(Refer to Removal of Fan)
5. Remove 2 screws ( ).
6. Remove 2 screws ( ) and then remove the Reinforce-
6. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (upper_center).
7. Remove the flexible cables from the connectors (C30,
C31, C32).
8. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA6, CA7, CA8).
9. Remove 6 screws ( ) and then remove C3-Board
(upper).
9.27. Removal of C4-Board (upper)
1. Remove the Reinforcement Angle (upper_center).
(Refer to Removal of C3-Board (upper))
2. Remove the flexible cables from the connectors (C40,
C41, C42).
3. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA9, CA10, CA11).
4. Remove 6 screws ( ) and then remove C4-Board
(upper).
40
TH-103PF12W / TH-103PF12T
9.28. Removal of C5-Board (upper)
1. Remove the Reinforcement Angle (upper_left).
(Refer to Removal of SS2-Board)
2. Disconnect the connector (C55).
3. Remove the flexible cables from the connectors (C50,
3. Remove the flexible cables from the connectors (C50,
C51).
4. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA12, CA13, CA14).
5. Remove 6 screws ( ) and then remove C5-Board
(upper).
9.29. Removal of C6-Board (upper)
1. Remove the Reinforcement Angle (upper_left).
(Refer to Removal of SS2-Board)
2. Remove the flexible cable from the connector (C61).
3. Remove 4 screws ( ) and then remove the flexible
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA15, CA16).
4. Remove 4 screws ( ) and then remove C6-Board
(upper).
9.30. Removal of C1-Board (lower)
1. Remove the Reinforcement Angle (lower_left).
(Refer to Removal of SS3-Board)
2. Remove the flexible cable from the connector (C11).
3. Remove 4 screws ( ) and then remove the flexible
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2).
4. Remove 4 screws ( ) and then remove C1-Board (lower).
Click on the first or last page to see other TH-103PF12W / TH-103PF12T service manuals if exist.