Panasonic KX-NCV200BX / KX-TVM204X / KX-TVM296X (serv.man3) Service Manual ▷ View online
53
KX-NCV200BX / KX-TVM204X / KX-TVM296X
6.6.2.
Environmental Requirements
The hard disk is sensitive to cold, heat, dryness, humidity, shock, vibration, and magnetic fields. Please observe the conditions
specified below.
specified below.
Hard Disk Drive Usage Environment
Allowable Relative Humidity vs. Temperature
Operating Temperature:
5
°C to 40°C
Operating Humidity:
See the graph below.
Shock:
Under 5G
Vibration:
5 Hz to 22Hz: 0.0042 cm displacement; double amplitude, 1 octave per minute.
23 Hz 350 Hz: Under 0.5G
23 Hz 350 Hz: Under 0.5G
Magnetic Field:
DC: 0.6mT
to 700 kHz: 0.7
to 700 kHz: 0.7
µT
700 kHz to 1.5 MHz: 3
µT
54
KX-NCV200BX / KX-TVM204X / KX-TVM296X
7 Troubleshooting Guide
• It is impossible to replace IC105 by itself. To replace IC105, replace the KX-NCV200 Main board (PCB1) assembly.
• When replacing the KX-NCV200 Main board (PCB1) assembly or IC105 remove the former MAC address label and affix the
• When replacing the KX-NCV200 Main board (PCB1) assembly or IC105 remove the former MAC address label and affix the
attached label which indicates the new MAC address.
7.1.
The RUN LED Does Not Light or is Abnormal when the Power Switch is
Turned On
Turned On
55
KX-NCV200BX / KX-TVM204X / KX-TVM296X
7.2.
The RUN LED Does Not Light when DPT is Connected
56
KX-NCV200BX / KX-TVM204X / KX-TVM296X
7.3.
TVM204X DSP Card is Out of Order
Click on the first or last page to see other KX-NCV200BX / KX-TVM204X / KX-TVM296X (serv.man3) service manuals if exist.