Panasonic KV-S7075C (serv.man2) Service Manual ▷ View online
93
Note
*1
: This item is available only if the optional Imprinter is installed to the scanner.
*2
: These items are also available in the User Utility software.
*3
: This setting is needed when replacing CONTROL Board or IC1003.
Remarks
1. Parameter setting by user
2. Status indication
3. Parameter setting by service person
4. Adjustment
5. Diagnosis
6. Maintenance
2. Status indication
3. Parameter setting by service person
4. Adjustment
5. Diagnosis
6. Maintenance
Adjust
Shading
Used to execute shading correction
4
All Position
1. Used to automatically adjust scanning length, vertical,
and horizontal position adjustment for front and back sides in
ADF mode
2. Used to automatically adjust scanning length, vertical, and
Horizontal position adjustment in Flatbed mode
and horizontal position adjustment for front and back sides in
ADF mode
2. Used to automatically adjust scanning length, vertical, and
Horizontal position adjustment in Flatbed mode
4
Individual Position
1. Used to execute automatic length, vertical, and horizontal
position adjustment for front and back sides in ADF mode
individually and used to execute automatic length, vertical, and
horizontal position adjustment in Flatbed mode individually
2. Used to manually adjust scanning length, vertical, and
horizontal position for front and back sides in ADF mode and
used to manually adjust scanning length, vertical, and
horizontal position adjustment in Flatbed mode
position adjustment for front and back sides in ADF mode
individually and used to execute automatic length, vertical, and
horizontal position adjustment in Flatbed mode individually
2. Used to manually adjust scanning length, vertical, and
horizontal position for front and back sides in ADF mode and
used to manually adjust scanning length, vertical, and
horizontal position adjustment in Flatbed mode
4
Double Feed
Used to correct the Double Feed Detector’s ultrasonic emission
level automatically or manually
level automatically or manually
4
USB ID
*3
Used to set a USB ID for the scanner, connected to the PC
3
Feed Speed
Used to change the paper feed speed
3
Other
Save Information
*2
Used to save the scanner and PC information
1
Item
Purpose
Remarks
94
9.3.
Operation
This section describes each operation (or status indication), according to the function item list shown in Sec.9.2.
9.3.1.
Scanner Status
This function indicates the scanner status, and updates it every few seconds. The status messages and their contents are
as follows.
as follows.
Classification
Code
Status Message
Contents
—
Scanner has no error.
No error
U11, U12, U14, U16 A paper jam has occurred.
Open the scanner’s door, remove the documents,
and close the door.
Place the documents back in the document feed
tray.
and close the door.
Place the documents back in the document feed
tray.
U11: Paper Feed Jam (Paper did not reach the
Waiting Sensor.)
U12: Conveyor Jam 1 (Paper did not reach the
Starting Sensor.)
U14: Conveyor Jam 2 (Paper did not reach the
Ending Sensor.)
U16: Exit Jam 1 (Paper did not pass through
the Ending Sensor.)
Waiting Sensor.)
U12: Conveyor Jam 1 (Paper did not reach the
Starting Sensor.)
U14: Conveyor Jam 2 (Paper did not reach the
Ending Sensor.)
U16: Exit Jam 1 (Paper did not pass through
the Ending Sensor.)
U18
Paper remains in the Scanner.
Open the scanner’s door, remove the documents,
and close the door.
Place the documents back in the document feed
tray.
Open the scanner’s door, remove the documents,
and close the door.
Place the documents back in the document feed
tray.
A document remains in the scanner, or dust is
attached around a sensor.
attached around a sensor.
U20
A skew error has occurred.
Skew error
U23
A paper double feed has occurred.
Open the scanner’s door, remove the documents,
and close the door.
Place the documents back in the document feed
tray.
Open the scanner’s door, remove the documents,
and close the door.
Place the documents back in the document feed
tray.
Double feed error
U30
Scanner Door is open!
Please close the door.
Please close the door.
Door is open.
U30: ADF Door or Exit Door
U30: ADF Door or Exit Door
Fxx
System error occurred!
Please consult with a service representative.
Please consult with a service representative.
Service level error occurred.
—
*** Caution***
The rollers need to be cleaned.
Please clean the rollers.
Please select “Clear Counter” button after cleaning
the rollers.
The rollers need to be cleaned.
Please clean the rollers.
Please select “Clear Counter” button after cleaning
the rollers.
Caution message for cleaning rollers.
—
***Caution***
The replaceable rollers (consumable) are reaching
the end of their usable life.
To insure reliable operation, please replace these
rollers with Roller Exchange Kit for your specific
scanner.
After replacing the roller, select the “Clear Counter”
button.
The replaceable rollers (consumable) are reaching
the end of their usable life.
To insure reliable operation, please replace these
rollers with Roller Exchange Kit for your specific
scanner.
After replacing the roller, select the “Clear Counter”
button.
Caution message for replacing rollers.
—
*** Caution***
The front reference plate may need to be cleaned.
Please clean the front reference plate.
The front reference plate may need to be cleaned.
Please clean the front reference plate.
The surface of the plate is dirty.
—
*** Caution***
The back reference plate may need to be cleaned.
Please clean the back reference plate.
The back reference plate may need to be cleaned.
Please clean the back reference plate.
The surface of the plate is dirty.
—
Scanner is not connected!
Scanner is not connected to the PC properly.
95
9.3.2.
Error Codes
Classification and Error codes are as follows. Troubleshooting for this error message and codes is shown in Sec.10.2.
Fig. 9.3.2.1 Classification Code Outline
Fig. 9.3.2.1 Classification Code Outline
Fig. 9.3.2.2 Error Code Outline
Classifica-
tion Code
Contents
Classifica-
tion Code
Contents
Classifica-
tion Code
Contents
U1-
Document
H1-
—
F1-
Memory
U2-
Document
H2-
—
F2-
—
U3-
Door
H3-
—
F3-
Hardware
U4-
—
H4-
—
F4-
Paper Feed
U5-
—
H5-
—
F5-
Paper Sensor
U6-
—
H6-
—
F6-
Scanning
U7-
—
H7-
—
F7-
—
U8-
—
H8-
—
F8-
Others (Sensors)
U9-
—
H9-
—
F9-
—
ST1
Error Contents
0x
No error
1x
Paper jam error
2x
Door open error
3x
Mechanical function error
4x
Paper sensor error
5x
Scanning error
6x
Other (Sensor) error
7x
—
8x
Hardware error
9x
Hardware error
Ax
—
Bx
—
Cx
—
Dx
—
Ex
—
Fx
—
96
Fig.9.3.2.3 Error Code
Classifica-
tion
Code
Error Code
Contents
ST1
ST2
ST3
ST4
-
00
00
00
00
No error
-
0A
00
00
00
Stop by clicking “STOP”
-
0B
00
00
00
Stop by ADF stop-command
U11
11
00
00
00
Paper feed jam (A document didn’t reach the Waiting Sensor.)
U12
12
00
00
00
Conveyor jam 1 (Paper didn’t reach the Starting Sensor.)
U14
14
00
00
00
Conveyor jam 2 (Paper didn’t reach the Ending Sensor.)
U16
16
00
00
00
Exit jam 1 (Paper did not pass through the Ending Sensor.)
*1
U18
18
*1
xx
00
00
Document remains in scanner (
*1
ST2: Sensor Information)
U20
19
00
00
00
Skew error
U23
1C
00
x
00
Double feed error (ST3:0 Feed interval /:3 Ultrasonic)
U30
20
00
00
00
Door open
F17
87
x
x
00
SD-RAM error
(ST2:1 SD-RAM error for the front default image /:2 SD-RAM error for the
back default image), (ST3: 0 Memory error /:1 Clock phase-check error)
(ST2:1 SD-RAM error for the front default image /:2 SD-RAM error for the
back default image), (ST3: 0 Memory error /:1 Clock phase-check error)
F18
88
x
00
00
Extension SD-RAM error
(ST2:1 Extension SD-RAM error for the front image /:2 Extension
SD-RAM error for the back image)
(ST2:1 Extension SD-RAM error for the front image /:2 Extension
SD-RAM error for the back image)
F31
95
x
00
00
Analog IC error (ST2: bit 0 to 3 IC1 to IC4 for front /: bit 4 to 7 IC1 to IC4 for
back)
back)
F33
97
00
00
00
USB IC error
F34
98
00
00
00
EEPROM error
F36
9A
x
00
00
Front Gate Array error (ST2:0 Access error /:1 Shading RAM error)
F38
9C
x
00
00
Back Gate Array error (ST2:0 Access error /:1 Shading RAM error)
F40
30
00
00
00
Hopper error
F41
31
00
00
00
Carriage error
F50
40
00
00
00
Waiting Sensor adjustment error
F51
41
00
00
00
Starting Sensor adjustment error
F52
42
00
00
00
Skew (R) Sensor adjustment error
F53
43
00
00
00
Skew (L) Sensor adjustment error
F55
45
00
00
00
Ending Sensor adjustment error
F60
50
00
00
00
Front side gain adjustment error
F61
51
00
00
00
Front side black level adjustment error
F62
52
00
00
00
Back side gain adjustment error
F63
53
00
00
00
Back side black level adjustment error
F80
60
00
00
00
Double Feed Detector error
Click on the first or last page to see other KV-S7075C (serv.man2) service manuals if exist.