Panasonic KV-S7075C (serv.man2) Service Manual ▷ View online
77
8.3.21. STARTING SENSOR Board
(1) Remove the Drive Rollers 1, 2, and 3. (See 8.3.19.)
(2) Remove the Hopper. (See 8.3.9.)
(3) Remove the 2 screws and 1 connector (CN12) on the
STARTING SENSOR Board.
STARTING SENSOR Board.
78
8.3.22. ADF Glass (B)
(1) Raise the Hopper Tray in the direction of the arrow, and then
pull the Exit Door Release to open the Exit Door.
pull the Exit Door Release to open the Exit Door.
(2) Remove the 2 screws while holding the glass surface.
Reassembling Note:
a. With the included Roller Cleaning Paper or Model
KV-SS03 (Option: Roller Cleaning Paper), be sure to
clean up fingerprints and dust from the glass attached
on the glass surface.
Otherwise, image scanning quality may be affected.
b. Be sure to attach the ADF Glass (B), so that the white
sheet is at the front.
KV-SS03 (Option: Roller Cleaning Paper), be sure to
clean up fingerprints and dust from the glass attached
on the glass surface.
Otherwise, image scanning quality may be affected.
b. Be sure to attach the ADF Glass (B), so that the white
sheet is at the front.
79
8.3.23. Conveyor 2
8.3.24. Drive Roller 4
(1) Remove the ADF Glass (B). (See 8.3.22.)
(2) Remove the 2 screws.
(1) Remove the Conveyor 2. (See 8.3.23.)
(2) Pull out the Drive Roller 4 in the direction of the arrow.
Reassembling Note:
When reassembling the Drive Roller 4, reattach the Drive
Belt 3, paying attention to the Note (BELT LAYOUT) in
8.3.18.
Belt 3, paying attention to the Note (BELT LAYOUT) in
8.3.18.
80
8.3.25. Hopper Front Cover
(1) Remove the Hopper Tray. (See 8.3.8.)
(2) Remove the ADF Cover (F). (See 8.3.12.)
(3) Remove the 1 screw (a) and 1 screw (b) to release the
Hopper Front Cover from the scanner.
Hopper Front Cover from the scanner.
Click on the first or last page to see other KV-S7075C (serv.man2) service manuals if exist.