Panasonic KV-S7075C (serv.man2) Service Manual ▷ View online
65
8.3.9.
Hopper
8.3.10. SIZE DETECTOR Board
(1) Remove the Hopper Tray. (See 8.3.8.)
(2) Lift up the Hopper in the direction of the arrow (1) and
unlock it from the hooks (a) on both sides while holding the
Document Guides. And unlock the hooks (b) and pull it out
in the direction of the arrow (2).
unlock it from the hooks (a) on both sides while holding the
Document Guides. And unlock the hooks (b) and pull it out
in the direction of the arrow (2).
(3) Unlock the hook, and then remove the 1 connector (CN24)
for the HOPPER RELAY Board to separate the Hopper from
the scanner.
for the HOPPER RELAY Board to separate the Hopper from
the scanner.
(1) Remove the Hopper. (See 8.3.9.)
(2) Remove the 4 screws and 1 connector (CN3012) on the
SIZE DETECTOR Board.
SIZE DETECTOR Board.
66
8.3.11. Paper Sensor
(1) Remove the Hopper. (See 8.3.9.)
(2) Remove the 2 screws to release the Paper Sensor with plate
from the Hopper.
from the Hopper.
(3) Remove the 1 screw and 1 connector to separate the sensor
from the plate.
from the plate.
67
8.3.12. ADF Cover (F)
(1) Raise the Hopper Tray in the direction of the arrow, and then
pull the Exit Door Release to open the Exit Door.
pull the Exit Door Release to open the Exit Door.
(2) Remove the 1 screw (a).
(3) Push the ADF Door Release to open the ADF Door.
68
(4) Remove the 2 screws (b).
(5) Release the hooks in the direction of the arrows to separate
the ADF Cover (F) from the scanner.
the ADF Cover (F) from the scanner.
Click on the first or last page to see other KV-S7075C (serv.man2) service manuals if exist.