Panasonic KV-S7075C (serv.man2) Service Manual ▷ View online
45
8.2.5.
Back Cover
8.2.6.
DOCUMENT COVER DETECTOR Board
(4) Remove the 3 screws to separate the board from the panel.
(1) Remove the Document Cover. (See 8.2.2.)
(2) Remove the 4 screws (a) and 2 screws (b) to separate the
Back Cover from the scanner.
Back Cover from the scanner.
(1) Remove the Back Cover. (See 8.2.5.)
(2) Remove the 1 screw and 1 connector to release the
DOCUMENT COVER DETECTOR Board.
DOCUMENT COVER DETECTOR Board.
46
8.2.7.
Flatbed Conveyor
8.2.8.
CONTROL Board
(1) Remove the Document Cover. (See 8.2.2.)
(2) Remove the 4 screws and lift the Flatbed Conveyor.
Reassembling Note:
Be sure to match the projections on the conveyor with
the holes of the flatbed, and attach it to the scanner.
the holes of the flatbed, and attach it to the scanner.
(1) Remove the 2 screws.
(2) Pull the handles in the direction of the arrow to remove the
CONTROL Board.
CONTROL Board.
Reassembling Note:
Insert the CONTROL Board into the scanner unit along
the rails, and then push it in firmly.
the rails, and then push it in firmly.
47
8.2.9.
Side Cover (L)
8.2.10. Side Cover (R)
8.2.11. Flatbed Glass
(1) Remove the Front Cover. (See 8.2.3.)
(2) Remove the Back Cover. (See 8.2.5.)
(3) Remove the 3 screws to separate the Side Cover (L) from the
scanner.
scanner.
(1) Remove the Front Cover. (See 8.2.3.)
(2) Remove the Back Cover. (See 8.2.5.)
(3) Remove the 2 screws (a) and 1 screw (b) to release the Side
Cover (R) from the scanner.
Cover (R) from the scanner.
(1) Remove the Flatbed Conveyor. (See 8.2.7.)
(2) Remove the Side Cover (R). (See 8.2.10.)
(3) Remove the 4 screws and lift the Flatbed Glass to remove it.
Reassembling Note:
With the included Roller Cleaning Paper or Model
KV-SS03 (Option: Roller Cleaning Paper), be sure to
clean up fingerprints and dust from the glass.
Otherwise, image scanning quality may be affected.
KV-SS03 (Option: Roller Cleaning Paper), be sure to
clean up fingerprints and dust from the glass.
Otherwise, image scanning quality may be affected.
48
8.2.12. CARRIAGE HOME DETECTOR Board
(1) Remove the Side Cover (L). (See 8.2.9.)
(2) Remove the Flatbed Glass. (See 8.2.11.)
(3) Slide the CIS Carriage in the direction of the arrow.
(4) Remove the 1 screw from the left side of the scanner and
1 connector to release the CARRIAGE HOME DETECTOR
Board with the plate from the scanner.
1 connector to release the CARRIAGE HOME DETECTOR
Board with the plate from the scanner.
(5) Remove the screw to release the board from the plate.
Click on the first or last page to see other KV-S7075C (serv.man2) service manuals if exist.