Panasonic KV-S7075C (serv.man2) Service Manual ▷ View online
53
8.2.17. Power Box & Cover
(1) Remove the Shield Plates 1 to 4. (See 8.2.13.)
(2) Remove the 2 screws (a), 2 screws (b), and 2 connectors
(CN4001, Power Switch Relay Connector) and then pull out
the Power Box in the direction of the arrow.
Note:
(CN4001, Power Switch Relay Connector) and then pull out
the Power Box in the direction of the arrow.
Note:
When pulling out Power Box, be sure not to damage the
Power Switch Relay Connector in the Power Box.
Power Switch Relay Connector in the Power Box.
(3) Remove the 5 screws to release the Cover from the box.
54
8.2.18. FAN
8.2.19. POWER Board
(1) Remove the Power Box & Cover. (See 8.2.17.)
(2) Remove the 1 connector to the POWER Board and 2 screws
to release the FAN from the board.
to release the FAN from the board.
(1) Remove the Power Box & Cover. (See 8.2.17.)
(2) Remove the 7 screws (a), 3 screws (b), and all connectors on
the POWER Board.
the POWER Board.
55
8.2.20. CIS (F) RELAY Board Cover
(1) Remove the Flatbed Glass. (See 8.2.11.)
(2) Slide the CIS Carriage to the right (away from the Hopper).
(3) Remove the 5 screws to release the CIS (F) RELAY Board
Cover from the carriage.
Cover from the carriage.
(4) Lift the CIS (F) RELAY Board Cover upwards to remove it.
56
8.2.21. CIS (F)
(1) Remove the CIS (F) RELAY Board Cover. (See 8.2.20.)
(2) Remove the 4 screws and 4 connectors to release the CIS (F)
with CIS (F) RELAY Board from the CIS Carriage.
with CIS (F) RELAY Board from the CIS Carriage.
Note: Treating the Flat-cables connected to the CIS (F)
RELAY Board
Be sure to get the 2 Flat-cables through the slit of the
Cores before connecting them to the CIS (F) RELAY
Board.
Cores before connecting them to the CIS (F) RELAY
Board.
(3) Remove the CIS (F) while releasing the 2 Holders on the
CIS (F) RELAY Board in the direction of the arrows.
CIS (F) RELAY Board in the direction of the arrows.
Click on the first or last page to see other KV-S7075C (serv.man2) service manuals if exist.