Panasonic KV-S7075C (serv.man2) Service Manual ▷ View online
85
8.3.33. Exit Door Switch
8.3.34. CIS (B) & CIS (B) RELAY Board
(1) Remove the Exit Roller. (See 8.3.31.)
(2) Remove the 2 screws and 1 connector.
(1) Remove the Hopper. (See 8.3.9.)
(2) Remove the Drive Rollers 1 to 3. (See 8.3.19.)
(3) Remove the Double-feed Prevention Conveyor. (See 8.3.28.)
(4) Remove the Drive Roller 4. (See 8.3.24.)
(5) Remove the Exit Conveyor. (See 8.3.30.)
(6) Disconnect the 3 connectors for the CIS (B) and 2 connectors
for the CIS (B) RELAY Board.
for the CIS (B) RELAY Board.
(7) Remove the 4 screws for the CIS (B) to release the CIS (B)
from the scanner.
from the scanner.
(8) Remove the 5 screws for the CIS (B) RELAY Board.
86
8.3.35. Shaft
(9) Disconnect the 1 connector to release the CIS (B) RELAY
Board from the scanner.
Board from the scanner.
(1) Remove the Hopper. (See 8.3.9.)
(2) Remove the Drive Rollers 1, 2, 3. (See 8.3.19.)
(3) Remove the Double-feed Prevention Conveyor. (See 8.3.28.)
(4) Remove the 2 screws on the Shaft.
(5) Release the spring.
87
8.3.36. Paper Feed Motor
(6) Remove the E-ring on the back side to pull out the Shaft from
the scanner.
the scanner.
(1) Remove the Shaft. (See 8.3.35.)
(2) Remove the 2 screws to release the 2 connection plates from
the scanner.
(3) Remove the HOPPER HOME DETECTOR Board.
(See 8.3.27.)
the scanner.
(3) Remove the HOPPER HOME DETECTOR Board.
(See 8.3.27.)
(4) Remove the 2 screws.
88
8.3.37. Conveyor Motor
(5) Remove the 1 connector (CN3026) on the POWER RELAY
Board to pull out the motor from the scanner.
Board to pull out the motor from the scanner.
(1) Remove the Shaft. (See 8.3.35.)
(2) Remove the screw to release the connection plate from
the scanner.
(3) Remove the HOPPER RELAY Board. (See 8.3.29.)
the scanner.
(3) Remove the HOPPER RELAY Board. (See 8.3.29.)
(4) Remove the Exit Door Switch. (See 8.3.33.)
(5) Remove the 2 screws.
Click on the first or last page to see other KV-S7075C (serv.man2) service manuals if exist.