Panasonic KV-S5076H / KV-S5046H Service Manual ▷ View online
85
8.5.21.
Discharge Brush
8.5.22.
Conveyor Motor (KV-S5076H only)
1. Remove the Inner Cover C. (See 8.5.20.)
2. Remove the 2 screws that fasten the Discharge Brush.
1. Remove the Drive Belt. (See 8.5.12.)
2. Remove the Inner Cover C. (See 8.5.20.)
3. Remove the Inner Cover L.
4. Remove the 2 screws that fasten the Conveyor Motor
in place.
in place.
86
5. Disconnect the connector.
6. Pull and remove the Conveyor Motor.
87
8.5.23.
Exit Roller FEED BELT & EXIT MOTOR (KV-S5076H only)
8.5.24.
CIS(B) RELAY Board
1. Remove the Left Cover. (See 8.5.10.)
2. Remove the Inner Cover C. (See 8.5.20.)
3. Remove the FEED BELT.
4. Remove the 2 screws which is fixing EXIT MOTOR.
5. Disconnect the EXIT MOTER connector.
1. Remove the Inner Cover C. (See 8.5.20.)
88
8.5.25.
ENDING SENSOR Board
8.5.26.
CIS (B) unit
2. Disconnect the 2 connectors and Flat cable.
3. Remove the 4 screws.
1. Remove the CIS(B) RELAY Board. (See 8.5.24.)
2. Remove the Discharge Brush.
3. Remove the screw, and then disconnect the connector.
1. Remove the Left Cover. (See 8.5.10.)
2. Remove the Right Cover. (See 8.5.1.)
3. Remove the Rear Cover. (See 8.3.2.)
4. Remove the 2 screws.
5. Remove CIS(B) for the front direction.
Click on the first or last page to see other KV-S5076H / KV-S5046H service manuals if exist.