Panasonic KV-S5076H / KV-S5046H Service Manual ▷ View online
93
8.5.30.
Ionizer L and Ionizer R
8.5.31.
Drive Roller 1R,1L (KV-S5076H only)
1. Remove the Drive Roller 2. (See 8.5.29.)
2. Remove the 2 screws(a) (1 from each Ionizer).
3. Remove the 2 screws with ground-lugs (1 from each Ionizer).
4. Remove the 8 clampers.
5. Pull the Ionizer L and Ionizer R.
6. Remove 2 clampers.
7. Disconnect the connector.
1. Remove the Left Cover. (See 8.5.10.)
2. Remove the Drive Belt. (See 8.5.12.)
3. Remove the Hopper Plate Assembly. (See 8.5.14.)
4. Remove the Conveyor bottom. (See 8.5.16.)
94
5. Remove the Drive Belt of Drive Roller 1R side.
6. Remove the poly-slider.
7. Pull out the Drive Roller 1R in the direction of the arrow.
8. Remove the Drive Belt of Drive Roller 1L side.
95
8.5.32.
Conveyor 2
9. Remove the poly-slider.
10. Pull out the Drive Roller 1L in the direction of the arrow.
1. Remove the Left Cover. (See 8.5.10.)
2. Remove the Right Cover. (See 8.5.1.)
3. Remove the Rear Cover. (See 8.3.2.)
4. Remove the screw on the right, as seen from the back.
5. Remove the screw(a) on the left, as seen from the back.
6. Remove the Conveyor 2.
96
8.5.33.
Drive Roller 3
8.5.34.
Exit Roller
1. Remove the Conveyor 2. (See 8.5.32.)
2. Remove the Drive Belt. (See 8.5.12.)
3. Pull out the Drive Roller 3 in the direction of the arrow.
1. Remove the Conveyor 2. (See 8.5.32.)
2. Remove the Power Box. (See 8.5.6.)
3. Remove the Exit Roller Feed BELT. (See 8.5.23.)
(for KV-S5076H)
(for KV-S5076H)
4. Remove the Drive BELT. (for KV-S5046H)
5. Remove the Discharge Brush. (See 8.5.21.)
6. Pull out the Exit Roller in the direction of the arrow.
Click on the first or last page to see other KV-S5076H / KV-S5046H service manuals if exist.