Panasonic KV-S4065CL / KV-S4065CW / KV-S4065CWCN / KV-S4085CL / KV-S4085CW / KV-S4085CWCN Service Manual ▷ View online
5
1.4.
For Service Technicians
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help to prevent recurring malfunctions.
When repairing, the following precautions will help to prevent recurring malfunctions.
1. Cover the plastic parts with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not grasp IC or LSI pins with bare fingers.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not grasp IC or LSI pins with bare fingers.
1.5.
About Lead Free Solder (PbF: Pb free)
Note
• In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder
that contains lead.
• We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),
Silver (Ag), and Copper (Cu).
• This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and
repair work we suggest using the same type of solder.
Distinction of PbF PCB
• PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Caution
• PbF solder has a melting point that is 50
°
- 70
°
F, (30
°
- 40
°
C) higher than Pb solder.
Please use a soldering iron with temperature control and adjust it to 700
°
± 20
°
F (370
°
± 10
°
C).
• Exercise care while using higher temperature soldering irons.: Do not heat the PCB for too long time in order to
prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100
°
F (600
°
C).
• When applying PbF solder to double layered boards, please check the component side for excess solder which may
flow onto the opposite side (See figure below)
1.5.1.
Suggested Pb free solder
We recommend you to use the following solder when re-soldering components for repair. Before using other Pb free solder than the
following solder, make sure to confirm that the solder maker (you use) has the license agreement for Pb free solder.
following solder, make sure to confirm that the solder maker (you use) has the license agreement for Pb free solder.
Supplier: Senju Metal Industry Co., Ltd. (http://www.senju-m.co.jp)
Part Description in Senju: EcoSolder RMA02 P3 M705 Series
Part Description in Senju: EcoSolder RMA02 P3 M705 Series
1.6.
About RoHS
This product is fully compliant with the national laws transposed from the EU Directive on the restriction of the use of certain
hazardous substances (RoHS) in electrical and electronic equipment, effective 1st July 2006 in the EU countries.
hazardous substances (RoHS) in electrical and electronic equipment, effective 1st July 2006 in the EU countries.
In order for the product to comply with the RoHS Directive, the six particular substances (lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) have been either totally eliminated or limited to the
concentration level below maximum allowed. Consequently spare parts have been changed to RoHS-compliant parts where
applicable.
Due to spare parts application of RoHS legislation, non-compliant spare parts cannot be used to repair compliant products put on
the EU market on or after 1st July 2006. Please therefore make sure to order and use RoHS-compliant spare parts listed in this
manual.
chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) have been either totally eliminated or limited to the
concentration level below maximum allowed. Consequently spare parts have been changed to RoHS-compliant parts where
applicable.
Due to spare parts application of RoHS legislation, non-compliant spare parts cannot be used to repair compliant products put on
the EU market on or after 1st July 2006. Please therefore make sure to order and use RoHS-compliant spare parts listed in this
manual.
6
2 SPECIFICATIONS
2.1.
KV-S4085CL/ S4085CW Series
Item
Model No.
*1
KV-S4085CL Series
*2
KV-S4085CW Series
Scanner
Scanning Face
Duplex
Scanning Method
CIS (Contact-type color image sensor) for Front and Back sides
Scanning Width
227 mm (9.0 in.)
302 mm (11.9 in.)
Readout Speed
*3
Black & White: 80 ppm / 160 ipm (A4, 200 dpi, Portrait)
Color (JPEG): 80 ppm / 160 ipm (A4, 200 dpi, Portrait)
Color (JPEG): 80 ppm / 160 ipm (A4, 200 dpi, Portrait)
Resolution
Main scanning direction: 100 - 600 dpi (1 dpi step)
Sub-scanning direction: 100 - 600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Sub-scanning direction: 100 - 600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Image Output
Binary, Grayscale, Color,
*4
MultiStream
TM
(Binary and Color, Binary and Grayscale)
Tonal Gradation
Dither (64 step gradation), Error diffusion (64 step gradation), Grayscale (8 bit), Color (24 bit)
Image Control
Image emphasis, Dynamic threshold, Automatic separation, Multi-color dropout, Mirror image,
Noise reduction
Noise reduction
Other Functions
Patch code detection (Kodak patch 2,3,T), Double feed detection
Paper
Size
48 x 70 mm (1.9 x 2.8 in.) to 297 x 432 mm (11.7 x 17 in.)
Note:
In manual feed or thick paper mode: 48 x 100 mm (1.9 x 3.9 in.)
Thickness
0.04 to 0.2 mm (1.6 to 7.9 mils) (*Straight-path mode: 0.04 to 0.6 mm (1.6 to 23.6 mils))
Note: 1 mil = 1 / 1000 in.
Weight
Thin paper mode: 20 to 50 g/m
2
(5.3 to 13.3 lb.)
Standard paper mode: 50 to 157 g/m
2
(13.3 to 41.8 lb.)
Auto mode: 20 to 157 g/m
2
(5.3 to 41.8 lb.)
Thick paper mode: 157 to 209 g/m
2
(41.9 to 55.6 lb.)
Note: 1 lb. = 3.75 g/m
2
Detection
Empty, Jam, Double-feed detection, and Bent-paper detection
Interface
USB 2.0 (Connector type: B)
Hopper Capacity
300 sheets [64 g/m
2
(17.1 lb.)]
Unit
External Dimensions
(Width x Depth x Height)
(Width x Depth x Height)
474 x 585 x 329 mm (18.7 x 23.0 x 13.0 in.)
Note: When the Front Door is open, height is 800 mm (31.5 in.)
Note: When the Front Door is open, height is 800 mm (31.5 in.)
Weight
25 kg (55 lb.)
Power Requirement
AC 100 V to AC120 V, 50 / 60 Hz
AC 220 V to AC240 V, 50 / 60 Hz
AC 220 V to AC240 V, 50 / 60 Hz
Power
consumption
consumption
Maximum
(Scanning)
(Scanning)
1.5 A (AC 100 V to 120 V)
0.7 A (AC 220 V to 240 V)
0.7 A (AC 220 V to 240 V)
Minimum
(Standby)
(Standby)
0.7 A (AC 100 V to 120 V)
0.4 A (AC 220 V to 240 V)
0.4 A (AC 220 V to 240 V)
Sleep Mode
4 W or less (AC 100 V to 120 V)
5 W or less (AC 220 V to 240 V)
5 W or less (AC 220 V to 240 V)
Environment Operating Temperature and
Humidity
Temperature: 15
°
C to 30
°
C (59
°
F to 86
°
F)
Humidity: 20 % to 80 %RH
Storage Temperature and
Humidity
Humidity
Temperature: 0
°
C to 40
°
C (32
°
F to 104
°
F)
Humidity: 10 % to 80 %RH
Accessories
Power cord, USB cable, Roller Cleaning Paper, Blower, Shading Paper, CD ROM (Installation
Manual, Operation Manual, RTIV software, Device driver, ISIS driver, TWAIN driver, PIE Manual,
RTIV Manual, User Utility, Multi-color Drop-out Utility, User Utility Manual, Control Sheet), Printed
materials (Installation Manual, Safety Guide, and others)
Manual, Operation Manual, RTIV software, Device driver, ISIS driver, TWAIN driver, PIE Manual,
RTIV Manual, User Utility, Multi-color Drop-out Utility, User Utility Manual, Control Sheet), Printed
materials (Installation Manual, Safety Guide, and others)
PbF (Pb Free)
Applied to PCB assemblies CONTROL, RELAY (UPPER), DOUBLE FEED DETECTOR LCR,
DOUBLE FEED DETECTOR L, DOUBLE FEED DETECTOR C, DOUBLE FEED DETECTOR R,
RELAY (LOWER), PANEL, DRIVE, POWER, EXIT SENSOR, PAPER JAM SENSOR, POST-
IMPRINTER DOOR, POINTER, STARTING SENSOR, WAITING SENSOR, HOPPER HOME,
AFE (F), AFE (B), DFP HOME, SLIP DETECTOR SENSOR (1), SLIP DETECTOR SENSOR(2),
SLIP DETECTOR SENSOR RELAY, BENT PAPER L (S) SENSOR, BENT PAPER R (S) SENSOR,
BENT PAPER L (R) SENSOR, and BENT PAPER R (R) SENSOR Boards
DOUBLE FEED DETECTOR L, DOUBLE FEED DETECTOR C, DOUBLE FEED DETECTOR R,
RELAY (LOWER), PANEL, DRIVE, POWER, EXIT SENSOR, PAPER JAM SENSOR, POST-
IMPRINTER DOOR, POINTER, STARTING SENSOR, WAITING SENSOR, HOPPER HOME,
AFE (F), AFE (B), DFP HOME, SLIP DETECTOR SENSOR (1), SLIP DETECTOR SENSOR(2),
SLIP DETECTOR SENSOR RELAY, BENT PAPER L (S) SENSOR, BENT PAPER R (S) SENSOR,
BENT PAPER L (R) SENSOR, and BENT PAPER R (R) SENSOR Boards
Note: Distinction of PbF PCB
PCBs manufactured using lead free solder will have a PbF stamp on the PCB.
Option
*5
Roller Exchange Kit (KV-SS033)
*5
Roller Cleaning Paper (KV-SS03)
*5
Imprinter (KV-SS014)
*5
Ink Cartridge (KV-SS021)
7
Note:
*1
: KV-S4085CL Series
Note:
*2
: KV-S4085CW Series
*3
: The scanning speed depends on the test environment. In addition, it differs depending on the host computer operating
environment or applications.
*4
: MultiStream is a trademark of EMC Corporation.
*5
: KV-SSxxx (All Area except for China)
KV-SSxxx-CN (Only for China)
(xxx: 033, 03, 014, or 021)
(xxx: 033, 03, 014, or 021)
Model
Area
Serial No.
Power Cord
KV-S4085CL
USA
A00 xxxx 1001
For 100 to 120 V
KV-S4085CL-U
Europe
A26 xxxx 1001
For 220 to 240 V
Model
Area
Serial No.
Power Cord
KV-S4085CW
USA
999 xxxx 1001
For 100 to 120 V
KV-S4085CW-U
Europe
A21 xxxx 1001
For 220 to 240 V
KV-S4085CW-A
Australia
A50 xxxx 1001
For 220 to 240 V
KV-S4085CW-K
Korea
A22 xxxx 1001
For 220 to 240 V
KV-S4085CW-T
Taiwan
A23 xxxx 1001
For 100 to 120 V
KV-S4085CWCN
China
A24 xxxx 1001
For 220 to 240 V
8
2.2.
KV-S4065CL/ S4065CW Series
Item
Model No.
*1
KV-S4065CL Series
*2
KV-S4065CW Series
Scanner
Scanning Face
Duplex
Scanning Method
CIS (Contact-type color image sensor) for Front and Back sides
Scanning Width
227 mm (9.0 in.)
302 mm (11.9 in.)
Readout Speed
*3
Black & White: 60 ppm / 120 ipm (A4, 200 dpi, Portrait)
Color (JPEG): 60 ppm / 120 ipm (A4, 200 dpi, Portrait)
Color (JPEG): 60 ppm / 120 ipm (A4, 200 dpi, Portrait)
Resolution
Main scanning direction: 100 - 600 dpi (1 dpi step)
Sub-scanning direction: 100 - 600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Sub-scanning direction: 100 - 600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Image Output
Binary, Grayscale, Color,
*4
MultiStream
TM
(Binary and Color, Binary and Grayscale)
Tonal Gradation
Dither (64 step gradation), Error diffusion (64 step gradation), Grayscale (8 bit), Color (24 bit)
Image Control
Image emphasis, Dynamic threshold, Automatic separation, Multi-color dropout, Mirror image,
Noise reduction
Noise reduction
Other Functions
Patch code detection (Kodak patch 2,3,T), Double feed detection
Paper
Size
48 x 70 mm (1.9 x 2.8 in.) to 297 x 432 mm (11.7 x 17 in.)
Note:
In manual feed or thick paper mode: 48 x 100 mm (1.9 x 3.9 in.)
Thickness
0.04 to 0.2 mm (1.6 to 7.9 mils) (*Straight-path mode: 0.04 to 0.6 mm (1.6 to 23.6 mils))
Note: 1 mil = 1 / 1000 in.
Weight
Thin paper mode: 20 to 50 g/m
2
(5.3 to 13.3 lb.)
Standard paper mode: 50 to 157 g/m
2
(13.3 to 41.8 lb.)
Auto mode: 20 to 157 g/m
2
(5.3 to 41.8 lb.)
Thick paper mode: 157 to 209 g/m
2
(41.9 to 55.6 lb.)
Note: 1 lb. = 3.75 g/m
2
Detection
Empty, Jam, Double-feed detection, and Bent-paper detection
Interface
USB 2.0 (Connector type: B)
Hopper Capacity
300 sheets [64 g/m
2
(17.1 lb.)]
Unit
External Dimensions
(Width x Depth x Height)
(Width x Depth x Height)
474 x 585 x 329 mm (18.7 x 23.0 x 13.0 in.)
Note: When the Front Door is open, height is 800 mm (31.5 in.)
Note: When the Front Door is open, height is 800 mm (31.5 in.)
Weight
25 kg (55 lb.)
Power Requirement
AC 100 V to AC120 V, 50 / 60 Hz
AC 220 V to AC240 V, 50 / 60 Hz
AC 220 V to AC240 V, 50 / 60 Hz
Power
consumption
consumption
Maximum
(Scanning)
(Scanning)
1.4 A (AC 100 V to 120 V)
0.6 A (AC 220 V to 240 V)
0.6 A (AC 220 V to 240 V)
Minimum
(Standby)
(Standby)
0.7 A (AC 100 V to 120 V)
0.4 A (AC 220 V to 240 V)
0.4 A (AC 220 V to 240 V)
Sleep Mode
4 W or less (AC 100 V to 120 V)
5 W or less (AC 220 V to 240 V)
5 W or less (AC 220 V to 240 V)
Environment Operating Temperature and
Humidity
Temperature: 15
°
C to 30
°
C (59
°
F to 86
°
F)
Humidity: 20 % to 80 %RH
Storage Temperature and
Humidity
Humidity
Temperature: 0
°
C to 40
°
C (32
°
F to 104
°
F)
Humidity: 10 % to 80 %RH
Accessories
Power cord, USB cable, Roller Cleaning Paper, Blower, Shading Paper, CD ROM (Installation
Manual, Operation Manual, RTIV software, Device driver, ISIS driver, TWAIN driver, PIE Manual,
RTIV Manual, User Utility, Multi-color Drop-out Utility, User Utility Manual, Control Sheet), Printed
materals (Installation Manual, Safety Guide, and others)
Manual, Operation Manual, RTIV software, Device driver, ISIS driver, TWAIN driver, PIE Manual,
RTIV Manual, User Utility, Multi-color Drop-out Utility, User Utility Manual, Control Sheet), Printed
materals (Installation Manual, Safety Guide, and others)
PbF (Pb Free)
Applied to PCB assemblies CONTROL, RELAY (UPPER), DOUBLE FEED DETECTOR LCR,
DOUBLE FEED DETECTOR L, DOUBLE FEED DETECTOR C, DOUBLE FEED DETECTOR R,
RELAY (LOWER), PANEL, DRIVE, POWER, LED DRIVE, EXIT SENSOR, PAPER JAM SENSOR,
POST-IMPRINTER DOOR, POINTER, STARTING SENSOR, WAITING SENSOR, HOPPER
HOME, AFE (F), AFE (B), DFP HOME, SLIP DETECTOR SENSOR (1), SLIP DETECTOR SENSOR
(2), SLIP DETECTOR SENSOR RELAY, BENT PAPER L (S) SENSOR, BENT PAPER R (S)
SENSOR, BENT PAPER L (R) SENSOR, and BENT PAPER R (R) SENSOR Boards
DOUBLE FEED DETECTOR L, DOUBLE FEED DETECTOR C, DOUBLE FEED DETECTOR R,
RELAY (LOWER), PANEL, DRIVE, POWER, LED DRIVE, EXIT SENSOR, PAPER JAM SENSOR,
POST-IMPRINTER DOOR, POINTER, STARTING SENSOR, WAITING SENSOR, HOPPER
HOME, AFE (F), AFE (B), DFP HOME, SLIP DETECTOR SENSOR (1), SLIP DETECTOR SENSOR
(2), SLIP DETECTOR SENSOR RELAY, BENT PAPER L (S) SENSOR, BENT PAPER R (S)
SENSOR, BENT PAPER L (R) SENSOR, and BENT PAPER R (R) SENSOR Boards
Note: Distinction of PbF PCB
PCBs manufactured using lead free solder will have a PbF stamp on the PCB.
Option
*5
Roller Exchange Kit (KV-SS033)
*5
Roller Cleaning Paper (KV-SS03)
*5
Imprinter (KV-SS014)
*5
Ink Cartridge (KV-SS021)
Click on the first or last page to see other KV-S4065CL / KV-S4065CW / KV-S4065CWCN / KV-S4085CL / KV-S4085CW / KV-S4085CWCN service manuals if exist.