DOWNLOAD Panasonic KV-S1025C-S Service Manual ↓ Size: 9.74 MB | Pages: 119 in PDF or view online for FREE

29

    (5) Remove the screw from the right.

    (6) Remove the screw from the left.

    (7) Open the ADF Door.

    (8) Remove the Front Cover in the direction of the arrows (2),
         while holding up the cover in the direction of the arrows (1).

30

    (1) Remove the Side Cover (R). (See 8.2.1.)

    (2) Remove the Side Cover (L). (See 8.2.2.)

    (3) Remove the screw and the screw with spacer. 

    (4) While slightly lifting the Rear Cover in the direction of the
         arrow (1) (paying attention to the contact to the side of
         Power Switch), slide the cover out in the direction of the
         arrow (2). 

    (1) Push "Door Open Button" to open the ADF Door.
         (See 8.2.1-(1).)

    (2) Remove the 2 screws (1 from each side).

    (3) Close the ADF Door slowly until it clicks into place.

31

    (4) Pull and remove the Top Cover while releasing the 3 claws.

    (5) Disconnect the connector to the PANEL Board to release
         the Top Cover from the scanner.

32

The Scanning Glass (F) and its surroundings may be hot. 
Be sure to allow the inside of the scanner to cool down before performing any maintenance
or coming in contact with the inside of the unit.
   

(1) Slide the Scanning Glass (F) in the direction of the

arrow (1), while pushing both ends of the glass, to
unlock the glass from the scanner. 

(2) Insert the Glass Picker into the slit of the Scanning

Glass (F), and then hook and lift up the glass upwards to
release it from the Chassis.