Panasonic KV-S1025C-S Service Manual ▷ View online
17
7 MAINTENANCE
7.1.
Maintenance Chart
C: Clean R: Replace
(x 1000 sheets)
Note 1:
The above roller maintenance values are registered in the maintenance counter (Refer to Section 9), and the PC will
inform users the cleaning or replacement timing if the utility software in this scanner has been already installed.
Note 2:
The maintenance schedule was determined according to paper standards (A4: 80 g/m
The maintenance schedule was determined according to paper standards (A4: 80 g/m
2
/ Letter: 20 lb.), which can
vary greatly between users. Therefore, the values can also vary.
Description
Part Reference No.
2
4
6
8-40
50
60
70
80
90
100
Paper Feed Roller
Ref. No. 85 in Sec. 14.1
C
C
C
Clean
each part
every 2
(x 1000)
sheets’
scanning.
C
C
C
C
C
R
Double-feed Prevention Roller
Ref. No. 40 in Sec. 14.1
C
C
C
C
C
C
C
C
R
Conveyor Roller
Ref. No. 87 in Sec. 14.1
C
C
C
C
C
C
C
C
C
Exit Roller
Ref. No. 96 in Sec. 14.1
C
C
C
C
C
C
C
C
C
Free Rollers
Ref. No. 28 in Sec. 14.1
C
C
C
C
C
C
C
C
C
Scanning Glass (F)
Ref. No. 34 in Sec. 14.1
C
C
C
C
C
C
C
C
C
Scanning Glass (B)
Ref. No. 111 in Sec. 14.1
C
C
C
C
C
C
C
C
C
18
7.2.
Cleaning
7.2.1.
Preparation
Before cleaning, the following procedures are required.
(1) Turn off the scanner by turning the Power Switch off and
unplugging the AC Adaptor from the scanner.
(2) Remove the Feed Tray.
(3) Push the Door Open Button to open the ADF Door.
Note:
If the ADF Door does not open even with the
Door Open Button pushed repeatedly, there
is a possibility that the door is not latched.
In this case, try to close the ADF Door until it
clicks into place.
Door Open Button pushed repeatedly, there
is a possibility that the door is not latched.
In this case, try to close the ADF Door until it
clicks into place.
19
7.2.2.
Cleaning
According to the instructions in the following figures Fig. 7.2.2-1 and Fig. 7.2.2-2, wipe off the dirt from each part
surface, so as to realize a high-performance on the scanning condition.
surface, so as to realize a high-performance on the scanning condition.
(Fig. 7.2.1-1): Cleaning Parts and Action
Note:
*1
Action Code shows cleaning method as follows.
C: Clean the dirt off around each surface with KV-SS03 Option (Roller Cleaning Paper).
C: Clean the dirt off around each surface with KV-SS03 Option (Roller Cleaning Paper).
Note:
*2
1. Roller Cleaning Paper
• Open the bag on the dotted line, and take out the Roller Cleaning Paper.
• If the bag is left open for a long period of time before using it, the alcohol will evaporate. Please use the Roller
Cleaning Paper immediately after opening the bag.
• The Roller Cleaning Paper (KV-SS03 Option) is available via sales route.
2. If the ADF Door does not open even with the Door Open Button pushed repeatedly, there is a possibility that the
door is not latched. In this case, try to close the ADF Door until it clicks into place.
Maintenance Parts
*1
Action Code
Action
Comments
Paper Feed Roller
C
Clean each surface with
KV-SS03 Option (Roller
Cleaning Paper) to wipe off
the dirt around its surface.
KV-SS03 Option (Roller
Cleaning Paper) to wipe off
the dirt around its surface.
1. How to deal with the
Roller Cleaning Paper and
others
Roller Cleaning Paper and
others
→ See Note
*2
.
2. Cleaning position
→ See Fig. 7.2.2-2.
After cleaning the Paper Feed and
Double-feed Prevention Rollers,
execute “Clear Counter” for
cleaning roller with Service Utility.
(See 9.3.)
Double-feed Prevention Rollers,
execute “Clear Counter” for
cleaning roller with Service Utility.
(See 9.3.)
Double-feed Prevention Roller
C
Conveyor Roller
C
Exit Roller
C
Free Rollers
C
Scanning Glass (F)
C
Scanning Glass (B)
C
20
Caution:
The Scanning Glasses ((F) & (B)) and their surroundings may be hot.
Be sure to allow the inside of the scanner to cool down before performing any maintenance or coming in contact
with the inside of the unit.
Be sure to allow the inside of the scanner to cool down before performing any maintenance or coming in contact
with the inside of the unit.
(Fig. 7.2.2-2) Cleaning Position
C: Clean the dirt off around each surface with KV-SS03 Option (Roller Cleaning Paper).
Click on the first or last page to see other KV-S1025C-S service manuals if exist.