DOWNLOAD Panasonic KV-S1025C-S Service Manual ↓ Size: 9.74 MB | Pages: 119 in PDF or view online for FREE

21

    (1) Close the ADF Door slowly until it clicks into place. 

    (2) Install the Feed Tray. (See 4.2.1.)

    (3) Turn on the scanner by plugging the AC Adaptor to the
          scanner and turning the Power Switch on.

    (4) After cleaning the Paper Feed Roller and Double-feed
         Prevention Roller, execute “Clear Counter “for cleaning
         roller with Service Utility. (See 9.3.4.)

22

    (1) Turn off the scanner by turning the Power Switch off and
         unplugging the AC Adaptor from the scanner. (See 7.2.1.)

    (2) Remove the Feed Tray. (See 7.2.1.)

    (3) Push the Door Open Button to open the ADF Door. 
         (See 7.2.1.)

    (4) After opening the Paper Feed Roller Cover, remove the
         Paper Feed Roller.

    (5) Take out a new Paper Feed Roller from the Roller
         Exchange Kit (KV-SS035).

    (6) Install the new Paper Feed Roller with its gear facing to the
         left (seen from the back), and close the Paper Feed Roller
         Cover.

    (7) Close the ADF Door slowly until it clicks into place.
         (See 7.2.3.)

    (8) After installing the Feed Tray, turn on the scanner by
         plugging the AC Adaptor to the scanner and turning the
         Power Switch on. (See 4.2 and 4.3.) 

23

    (1) Turn off the scanner by turning the Power Switch off and
         unplugging the AC Adaptor from the scanner. (See 7.2.1.)

    (2) Remove the Feed Tray. (See 7.2.1.)

    (3) Push the Door Open Button to open the ADF Door. 
         (See 7.2.1.)

    (4) Open the Double-feed Prevention Roller Cover in the
         direction of the arrow, holding the Double-feed Prevention
         Roller not to drop out.

    (5) Remove the Double-feed Prevention Roller.

    (6) Take out a new Double-feed Prevention Roller from the
         Roller Exchange Kit (KV-SS035).
 
    (7) Install the new Double-feed Prevention Roller into the
         metal holder with the longer groove facing to the right-side
         (seen form the back), and close the Double-feed
         Prevention Roller Cover.
           Note:

        Make sure to close the Double-feed Prevention
        Roller Cover tightly, by pressing both ends of
        the cover.

    (8) Close the ADF Door slowly until it clicks into place.
         (See 7.2.3.)

    (9) After installing the Feed Tray, turn on the scanner by
         plugging the AC Adaptor to the scanner and turning the
         Power Switch on. (See 4.2 and 4.3.)

   After replacing the Paper Feed Roller and Double-feed
   Prevention Roller, make sure to execute “Clear Counter”
   for replacing Rollers with Service Utility. (See 9.3.4.)

24

The flowchart indicates disassembly sequence of the Exterior item, Mechanical parts’ item, Unit Components’ item, and Circuit
Board assemblies’ item. When reassembling, perform the steps in the reverse order unless otherwise instructed in the
Reassembling Notes.