Panasonic KV-S1025C-S Service Manual ▷ View online
41
(7) Slide and remove the bearing from the Conveyor Roller in
the direction of the arrow.
the direction of the arrow.
(8) After opening the Paper Feed Roller Cover, remove the
cover while slightly bending it.
And remove the Paper Feed Roller.
cover while slightly bending it.
And remove the Paper Feed Roller.
(9) Remove the Arm Guide.
42
(10) Unlock the Conveyor Roller by turning the hook of the
Conveyor Roller Bearing in the direction of the arrow (1),
while pushing the tip of the hook in the direction of the
arrow (0).
Conveyor Roller Bearing in the direction of the arrow (1),
while pushing the tip of the hook in the direction of the
arrow (0).
(11) Slide the Conveyor Roller with the Conveyor Roller Bearing
in the direction of the arrow (2), and remove it from the
notch in the scanner.
in the direction of the arrow (2), and remove it from the
notch in the scanner.
(12) Remove the Support-bearing.
(13) Remove the Conveyor Roller Bearing from the Conveyor
Roller, while unlocking the poly slider.
Roller, while unlocking the poly slider.
43
8.3.3.
Exit Roller
(1) Remove the Front Cover. (See 8.2.4.)
(2) Remove the screw (a) and the Tension-plate Assembly
with the spring. And remove the 2 screws (b) and the
Side-plate Assembly.
with the spring. And remove the 2 screws (b) and the
Side-plate Assembly.
(3) Remove the Conveyor Belt from the Exit Roller.
Reassembling Note: Tension-plate Assembly
(including BELT LAYOUT)
See 8.3.1.
(4) Pull and remove the Pulley of the Exit Roller in the
direction of the arrow while unlocking the stopper on the
pulley.
Reassembling Note:
direction of the arrow while unlocking the stopper on the
pulley.
Reassembling Note:
After reassembling the Pulley, be sure to check
the Pulley's lock to the Exit Roller by pulling the
pulley.
the Pulley's lock to the Exit Roller by pulling the
pulley.
44
(5) Slide and remove the bearing from the Exit Roller in the
direction of the arrow.
direction of the arrow.
(6) Unlock the Exit Roller by turning the hook of the Conveyor
Roller Bearing in the direction of the arrow (1), while
pushing the tip of the hook in the direction of the arrow (0).
Roller Bearing in the direction of the arrow (1), while
pushing the tip of the hook in the direction of the arrow (0).
(7) Slide the Exit Roller with the Conveyor Roller Bearing in the
direction of the arrow (2), and remove it from the notch in
the scanner.
direction of the arrow (2), and remove it from the notch in
the scanner.
(8) Remove the Support-bearing.
(9) Remove the Conveyor Roller Bearing from the Exit Roller,
while unlocking the poly slider.
while unlocking the poly slider.
Click on the first or last page to see other KV-S1025C-S service manuals if exist.