Panasonic KX-FP158RU-B / KX-FP158RU-W Service Manual ▷ View online
1.2.
SAFETY PRECAUTIONS
1. Before servicing, unplug the AC power cord to prevent an electric shock.
2. When replacing parts, use only the manufacturer´s recommended components.
3. Check the condition of the power cord. Replace if wear or damage is evident.
4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc.
5. Before returning the serviced equipment to the customer, be sure to perform the following insulation resistance test to prevent
the customer from being exposed to shock hazards.
1.3. INSULATION RESISTANCE TEST
1. Unplug the power cord and short the two prongs of the plug with a jumper wire.
2. Turn on the power switch.
3. Measure the resistance value with an ohmmeter between the jumpered AC plug and each exposed metal cabinet part
(screw heads, control shafts, bottom frame, etc.).
Note: Some exposed parts may be isolated from the chassis by design. These will read infinity.
4. If the measurement is outside the specified limits, there is a possibility of a shock hazard.
1.4. FOR SERVICE TECHNICIANS
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover the plastic part´s boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not touch the IC or LSI pins with bare fingers.
1.5. BATTERY CAUTION
CAUTION
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s Instructions.
manufacturer. Dispose of used batteries according to the manufacturer’s Instructions.
The lithium battery is a critical component (type No. CR2032). Please observe for the proper polarity and the exact location
when replacing it and the exact location when replacing it and soldering the replacement lithium battery in.
when replacing it and the exact location when replacing it and soldering the replacement lithium battery in.
5
KX-FP158RU-B / KX-FP158RU-W
1.6. AC CAUTION
For safety, before closing the lower cabinet, please make sure of the following precautions.
1. The earth lead is fixed with the screw.
2. The AC connector is connected properly.
3. Wrap the earth lead around the core 3 times.
4. Wrap the AC lead around the core 3 times.
1.7. PERSONAL SAFETY PRECAUTIONS
1.7.1. MOVING SECTIONS OF THE UNIT
Be careful not to let your hair, clothes, fingers, accessories, etc., become caught in any moving sections of the unit.
The moving sections of the unit are the rollers and a gear. There is a separation roller and a document feed roller which are
rotated by the document feed motor. A gear rotates the two rollers. Be careful not to touch them with your hands, especially
when the unit is operating.
rotated by the document feed motor. A gear rotates the two rollers. Be careful not to touch them with your hands, especially
when the unit is operating.
6
KX-FP158RU-B / KX-FP158RU-W
1.7.2. LIVE ELECTRICAL SECTIONS
All the electrical sections of the unit supplied with AC power by the AC power cord are live.
Never disassemble the unit for service with the AC power supply plugged in.
CAUTION:
AC voltage is supplied to the primary side of the power supply unit. Therefore, always unplug the AC power cord before
disassembling for service.
disassembling for service.
1.8. SERVICE PRECAUTIONS
1.8.1. PRECAUTIONS TO PREVENT DAMAGE FROM STATIC ELECTRICITY
Electrical charges accumulate on a person. For instance, clothes rubbing together can damage electric elements or change
their electrical characteristics. In order to prevent static electricity, touch a metallic part that is grounded to release the static
electricity. Never touch the electrical sections such as the power supply unit, etc.
their electrical characteristics. In order to prevent static electricity, touch a metallic part that is grounded to release the static
electricity. Never touch the electrical sections such as the power supply unit, etc.
7
KX-FP158RU-B / KX-FP158RU-W
General
•
•
Help function
Please refer to WHEN YOU DON´T KNOW HOW TO
OPERATE THE UNIT, USE THE HELP FUNCTION.(P.27)
to print below features.
OPERATE THE UNIT, USE THE HELP FUNCTION.(P.27)
to print below features.
Display:
1. FEATURE LIST
2. DIRECTORY
3. TAD OPERATION
4. FAX RECEIVING
•
•
LCD (Liquid Crystal Display) readout
Plain Paper Facsimile Machine
•
•
8 second transmission speed *
•
•
A4, G3 compatible
•
•
Automatic document feeder (10 sheets)
•
•
Fax pager call
•
•
Quick scan
•
•
Resolution: Standard/Fine/Super fine/Photo (64 level)
•
•
Broad cast with NAVIGATOR
•
•
50-sheet paper capacity (20 lb.)
•
•
Automatic fax/phone switching
* The 8 second speed is based upon the ITU-T No. 1 Test
Chart on the condition that memory transmission is performed.
Chart on the condition that memory transmission is performed.
Large Memory (28 pages)... Performed by DRAM
Approx. 28 pages of memory reception
Approx. 25 pages of memory transmission
Integrated Telephone System
•
•
On-hook dialing
•
•
Digital Duplex Speakerphone
•
•
Voice muting
•
•
Redialing function
•
•
100-Station telephone directory with NAVIGATOR
Enhanced Copier Function
•
•
Multi-copy function (up to 50 copies)
•
•
Enlargement and reduction
•
•
Collate
•
•
64-Level halftone
Digital Answering System
•
•
Voice Time/Day Stamp
•
•
18-Minutes recording time
•
•
Voice and fax pager call
1.9. FEATURES
8
KX-FP158RU-B / KX-FP158RU-W
Click on the first or last page to see other KX-FP158RU-B / KX-FP158RU-W service manuals if exist.