Panasonic KX-FP158RU-B / KX-FP158RU-W Service Manual ▷ View online
1.15.10. INSTALLING / REPLACING THE FILM CARTRIDGE
Install the included ink film or replace the used ink film with new one. Each roll prints about 140 A4-sized pages.
Refer to OPTIONAL ACCESSORIES.(P.9)
Model No. KX-FA53A: Replacement film (1 roll)
Model No. KX-FA55A: Replacement film (2 rolls)
1. Open the front cover by pulling up the center part.
2. Push the back cover open button (green) on the right side of the unit.
OR
Push the back cover open lever (green) inside of the unit.
OR
Push the back cover open lever (green) inside of the unit.
3. Open the back cover.
For the first time installation of the supplied ink film, skip to step 6.
For the first time installation of the supplied ink film, skip to step 6.
For replacement only
4. Pull up the blue gear side and remove the used ink film. Remove the
used core.
4. Pull up the blue gear side and remove the used ink film. Remove the
used core.
21
KX-FP158RU-B / KX-FP158RU-W
For replacement only
5. Remove the stoppers and tags from the new ink film. Find the “T”
shaped gear (blue).
5. Remove the stoppers and tags from the new ink film. Find the “T”
shaped gear (blue).
6. Insert the blue core of the front ink film roll into the right slot of the
unit (
unit (
). Insert the “T” shaped gear (blue) into the left slot of the unit
(
).
Insert the rear ink film roll (
).
7. Turn the “T” shaped gear (blue) in the direction of arrow.
•
•
Make sure that the ink film is wrapped around the blue core at least
once.
once.
8. Close the back cover securely by pushing down on the dotted area
at both ends (
at both ends (
).
Close the front cover securely (
).
•
•
The following message will be displayed while the unit is checking
that there is no slack on the ink film.
that there is no slack on the ink film.
Display:
Refer to LCD TRANSLATION LIST (P.3)
Note:
•
•
The ink film is completely safe to touch, and will not rub off on
your hands like carbon paper.
your hands like carbon paper.
22
KX-FP158RU-B / KX-FP158RU-W
1.16. MAINTENANCE ITEMS AND COMPONENT LOCATIONS
1.16.1. OUTLINE
MAINTENANCE AND REPAIRS ARE PERFORMED USING THE FOLLOWING STEPS.
1. Periodic maintenance
Inspect the equipment periodically and if necessary, clean any contaminated parts.
2. Check for breakdowns
Look for problems and consider how they arose.
If the equipment can be still used, perform copying, self testing or communication testing.
3. Check equipment
Perform copying, self testing and communication testing to determine if the problem originates from the transmitter, receiver or
the telephone line.
the telephone line.
4. Determine causes
Determine the causes of the equipment problem by troubleshooting.
5. Equipment repairs
Repair or replace the defective parts and take appropriate measures at this stage to ensure that the problem will not recur.
6. Confirm normal operation of the equipment
After completing the repairs, conduct copying, self testing and communication testing to confirm that the equipment operates
normally.
normally.
7. Record keeping
Make a record of the measures taken to rectify the problem for future reference.
23
KX-FP158RU-B / KX-FP158RU-W
1.16.2. MAINTENANCE CHECK ITEMS/COMPONENT LOCATIONS
24
KX-FP158RU-B / KX-FP158RU-W
Click on the first or last page to see other KX-FP158RU-B / KX-FP158RU-W service manuals if exist.