DOWNLOAD Panasonic SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG Service Manual ↓ Size: 11.51 MB | Pages: 127 in PDF or view online for FREE

65

Step 3 : Remove the Button P.C.B..

• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Panel P.C.B. & Button Ornament

Unit”

• Refer to “Disassembly of Button P.C.B.”

Step 1 : Lift up the Button Ornament in order of sequences (1)
to (2) as shown.

Step 2 : Remove the Button Ornament.
Caution : During assembling, align the holes of the button
ornament with the guides of the Top Ornament & press
together.

66

• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to (Step 1) - (Step 3) of item 10.24.

Step 1 : Remove 3 screws.
Step 2 : Slightly lift up the CD Mechanism.

Step 3 : Detach 30P FFC at the connector (CN6006) on the
Main P.C.B..

Step 4 : Remove the CD Mechanism.

67

• Refer to “Disassembly of CD Mechanism”

Step 1 : Release catches and push down the fixed pins as
arrow shown.

Step 2 : Lift up the Mecha Chassis & remove the Floating
Springs.
Caution : Keep the Floating Springs in safe place and place 
them back during assembling.

Step 3 : Remove 3 screws.

68

Step 4 : Desolder points on the solder side of the CD Servo
P.C.B..

Step 5 : Upset the CD Servo P.C.B..
Step 6 : Lift up the Connector Cover.
Caution : Do not use strong force as it may damage the
connector cover.
Step 7 : Detach 24P FFC at the connector (CN7001) from the
CD Servo P.C.B..

Step 8 : Attach short pin to the 24P FFC of the Traverse
Assembly.
Step 9 : Remove the CD Servo P.C.B..