Panasonic SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG Service Manual ▷ View online
57
10.20. Disassembly of Bottom Orna-
ment
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Release two catches & guide by sequence (1) to (6) as
shown.
Caution : During assembling, ensure the Bottom Ornament
is fully catched to the Front Panel Block.
shown.
Caution : During assembling, ensure the Bottom Ornament
is fully catched to the Front Panel Block.
Step 2 : Remove the Bottom Ornament.
58
10.21. Disassembly of Lower Guide
Rail
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Bottom Ornament”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Bottom Ornament”
Step 1 : Release the 5P Wire from the groove.
Caution : During assembling, dressed the 5P wire into the
ribs of the Front Panel Block.
Caution : During assembling, dressed the 5P wire into the
ribs of the Front Panel Block.
Step 2 : Remove 4 screws.
Step 3 : Release 2 catches.
Caution : During assembling, ensure the Lower Guide Rail
is fully catched to the Front Panel Block.
Caution : During assembling, ensure the Lower Guide Rail
is fully catched to the Front Panel Block.
Step 4 : Remove the Lower Guide Rail.
59
10.22. Disassembly of SMPS P.C.B.
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 4 screws.
Step 2 : Lift up the 14P FFC.
Caution : The 14P FFC is pasted onto the SMPS Unit using
a double sided tape. During assembling, replace with new
one if torn.
Step 2 : Lift up the 14P FFC.
Caution : The 14P FFC is pasted onto the SMPS Unit using
a double sided tape. During assembling, replace with new
one if torn.
Step 3 : Gently lift up the SMPS Unit.
Caution : During assembling, a “click” sound could be
heard when the SMPS unit is attached properly to the Main
P.C.B..
heard when the SMPS unit is attached properly to the Main
P.C.B..
Step 4 : Remove the SMPS Unit.
60
Step 5 : Lift up the Himelons.
Caution : Replace the Himelons if they are torn during dis-
assembling.
Caution : Replace the Himelons if they are torn during dis-
assembling.
Step 6 : Press to release 2 catches using a screwdriver and
gently push up the SMPS Shield Unit.
Caution : During assembling, ensure that the SMPS Shield
Unit is catched properly to the SMPS bracket as shown.
gently push up the SMPS Shield Unit.
Caution : During assembling, ensure that the SMPS Shield
Unit is catched properly to the SMPS bracket as shown.
Step 7 : Gently push up the SMPS Shield Unit to release the
catches.
Caution : During assembling, ensure that the SMPS Shield
Unit is catched properly to the SMPS bracket as shown.
catches.
Caution : During assembling, ensure that the SMPS Shield
Unit is catched properly to the SMPS bracket as shown.
Step 8 : Remove the SMPS Shield Unit.
Click on the first or last page to see other SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG service manuals if exist.