DOWNLOAD Panasonic SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG Service Manual ↓ Size: 11.51 MB | Pages: 127 in PDF or view online for FREE

45

Step 6 : Detach 5P cable at the connector (P945) on the
Remote Sensor P.C.B..
Step 7 : Remove the Remote Sensor P.C.B..

• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of iPod Block”

Step 1 : Remove 2 screws.

Step 2 : Release the 4P Wire from the slot.
Step 3 : Detach 4P wire at the connector (CN931) on the Motor
P.C.B..
Caution : During assembling, ensure the 4P wire is
dressed into the slot.

46

Step 4 : Remove the Gear Box Assembly as shown.

Step 1 : Align the catch of the Gear Box Assembly with the
guide on the Front Panel Block as shown.

Step 2 : Slighly insert the Gear Box Assembly onto the Front
Panel Block as shown.

47

Step 3 : Connect 4P wire at the connector (CN931) on the
Motor P.C.B..
Step 4 : Dress the 4P Wire into the slot.

Step 5 : Fix 2 screws.

• Refer to “Disassembly of Gear Box Assembly”

Step 1 : Release 1 catch.
Step 2 : Remove the Motor P.C.B. as shown.
Caution 1 : During assembling, insert the Motor P.C.B.
underneath the rib.
Caution 2 : During assembling, ensure the Motor P.C.B. is 
fully catched and seated on the locator.

Step 3 : Release the 2P Wire from the slots.
Caution : During assembling, ensure the 2P wire is
dressed into the slots.

48

Step 4 : Desolder pins on the solder side of the Motor P.C.B.
and remove the Motor P.C.B..

• Refer to “Disassembly of Gear Box Assembly”

Step 1 : Remove the Belt.

Step 2 : Remove the Pulley Gear.