Panasonic SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG Service Manual ▷ View online
53
Step 2 : Remove the Lever Spring.
Caution : Keep the Lever Spring in safe place and place
them back during assembling.
Caution : Keep the Lever Spring in safe place and place
them back during assembling.
Step 3 : Upset the Gear Box Assembly.
Step 4 : Remove the Trigger Lever.
Step 4 : Remove the Trigger Lever.
Step 5 : Remove the Driver Gear A.
10.17. Disassembly of SW Lever,
Relay Gear & Driver Gear B
• Refer to “Disassembly of Gear Box Assembly”
• Refer to “Disassembly of Belt & Pulley Gear”
• Refer to “Disassembly of Lever Spring, Trigger Lever &
• Refer to “Disassembly of Belt & Pulley Gear”
• Refer to “Disassembly of Lever Spring, Trigger Lever &
Driver Gear A”
Step 1 : Release 1 catch as shown.
Step 2 : Lift up the SW Lever as shown.
Step 2 : Lift up the SW Lever as shown.
Step 3 : Remove the SW Lever.
54
Caution : During assembling, a “click” sound could be
heard when the SW Lever is fully catched.
heard when the SW Lever is fully catched.
Step 4 : Remove the Relay Gear.
Step 5 : Remove the Driver Gear B.
55
10.18. Disassembly of Shutter & Shut-
ter Spring
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Press the catches inwards and push the Shutter down-
wards in order of sequences (1) to (2).
Caution : During assembling, ensure the Shutter is fully
catched.
wards in order of sequences (1) to (2).
Caution : During assembling, ensure the Shutter is fully
catched.
Step 2 : Upset the Front Panel Block.
Step 3 : Remove the Shutter & Shutter Spring.
Caution : Keep the Shutter Spring in safe place and place
them back during assembling.
Step 3 : Remove the Shutter & Shutter Spring.
Caution : Keep the Shutter Spring in safe place and place
them back during assembling.
56
10.19. Disassembly of Upper Guide
Rail & Top Ornament
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Lift up & remove the Lighting Pieces as show.
Caution : Keep the Lighting Pieces in safe place and place
them back during assembling.
Caution : Keep the Lighting Pieces in safe place and place
them back during assembling.
Step 2 : Remove 4 screws.
Step 3 : Release 3 catches.
Caution : During assembling, ensure the Upper Guide Rail
is fully catched to the Front Panel Block.
Step 3 : Release 3 catches.
Caution : During assembling, ensure the Upper Guide Rail
is fully catched to the Front Panel Block.
Step 4 : Remove the Upper Guide Rail & the Top Ornament.
Click on the first or last page to see other SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG service manuals if exist.