Panasonic SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG Service Manual ▷ View online
61
Step 9 : Remove 3 screws.
Step 10 : Remove the SMPS P.C.B..
Caution : During assembling, ensure that the SMPS P.C.B.
is properly seated on the locators.
is properly seated on the locators.
62
10.23. Replacement of Diode (D1700)
• Refer to “Disassembly of SMPS P.C.B.”
10.23.1. Disassembly of Diode (D1700)
Caution : Avoid touching the heatsink unit and SMPS
P.C.B., due to its high temperature after prolonged use.
Touching it may lead to injuries.
Step 1 : Desolder pins of the Diode (D1700) on the solder side
of SMPS P.C.B..
P.C.B., due to its high temperature after prolonged use.
Touching it may lead to injuries.
Step 1 : Desolder pins of the Diode (D1700) on the solder side
of SMPS P.C.B..
Step 2 : Remove 1 screw.
Step 3 : Remove the Diode (D1700).
63
10.23.2. Assembly of Diode (D1700)
Step 1 : Apply grease to the heatsink unit.
Step 2 : Fix the Diode (D1700) onto SMPS P.C.B..
Step 3 : Fix the Diode (D1700) onto the heatsink unit with 1
screw.
Caution : Ensure the Diode (D1700) is fixed properly to the
heatsink.
Step 2 : Fix the Diode (D1700) onto SMPS P.C.B..
Step 3 : Fix the Diode (D1700) onto the heatsink unit with 1
screw.
Caution : Ensure the Diode (D1700) is fixed properly to the
heatsink.
Step 4 : Solder pins of the Diode (D1700).
Caution : Ensure the Diode (D1700) is seated properly onto
the SMPS P.C.B. before soldering.
Caution : Ensure the Diode (D1700) is seated properly onto
the SMPS P.C.B. before soldering.
10.24. Disassembly of Panel P.C.B. &
Button Ornament Unit
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 1 screw.
Step 2 : Lift up the Panel P.C.B. together with Button Ornament
Unit as shown.
Step 2 : Lift up the Panel P.C.B. together with Button Ornament
Unit as shown.
Step 3 : Detach 18P FFC at the connector (CN900) on the But-
ton P.C.B..
ton P.C.B..
64
Step 4 : Detach the Panel P.C.B. from the Button Ornament
unit.
Step 5 : Remove the Panel P.C.B..
unit.
Step 5 : Remove the Panel P.C.B..
Caution : During assembling, a “click” sound could be
heard when the Panel P.C.B. and the Button Ornament
P.C.B. is properly connected.
heard when the Panel P.C.B. and the Button Ornament
P.C.B. is properly connected.
10.25. Disassembly of Button P.C.B.
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Panel P.C.B. & Button Ornament
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Panel P.C.B. & Button Ornament
Unit”
Step 1 : Remove 4 screws.
Step 2 : Lift up the Button P.C.B. in order of sequences (1) to
(2) as shown.
(2) as shown.
Click on the first or last page to see other SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG service manuals if exist.