Panasonic SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG Service Manual ▷ View online
37
Step 3 : Connect 5P wire at the connector (CN501) on the iPod
P.C.B..
Caution : During assembling, dressed the 5P wire into the
ribs of the Front Panel Block.
P.C.B..
Caution : During assembling, dressed the 5P wire into the
ribs of the Front Panel Block.
Step 4 : Gently push the Slide Guide Pin upwards. A “click”
sound is heard when the Slide Guide Pin is fully catched.
sound is heard when the Slide Guide Pin is fully catched.
38
10.8.3.
Disassembly of iPod Support &
iPod Spring
iPod Spring
• Refer to “Disassembly of iPod Block”
Step 1 : Remove 2 screws.
Step 2 : Lift up the iPod Support together with the iPod Spring
as shown.
as shown.
Step 3 : Release the iPod Spring & remove the iPod Support.
Caution : Keep the iPod Spring in safe place and place
them back during assembling.
Caution : Keep the iPod Spring in safe place and place
them back during assembling.
39
10.8.4.
Disassembly of iPod Base
• Refer to “Disassembly of iPod Block”
• Refer to “Disassembly of iPod Support & iPod Spring”
• Refer to “Disassembly of iPod Support & iPod Spring”
Step 1 : Insert a flathead screwdriver below the iPod Base as
shown.
Step 2 : Push inwards and lift up to release the pivot of the iPod
Base.
shown.
Step 2 : Push inwards and lift up to release the pivot of the iPod
Base.
Step 3 : Lift up the iPod Tap Tray Unit.
Caution : During assembling, a “click” sound is heard
when the iPod Tap Tray unit is properly fixed.
Caution : During assembling, a “click” sound is heard
when the iPod Tap Tray unit is properly fixed.
10.8.5.
Disassembly of iPod P.C.B.
• Refer to “Disassembly of iPod Block”
• Refer to “Disassembly of iPod Support & iPod Spring”
• Refer to “Disassembly of iPod Base”
• Refer to “Disassembly of iPod Support & iPod Spring”
• Refer to “Disassembly of iPod Base”
Step 1 : Remove 3 screws.
Step 2 : Remove the iPod P.C.B..
40
10.8.6.
Disassembly of Cradle Key & iPod
Tap Tray
Tap Tray
• Refer to “Disassembly of iPod Block”
• Refer to “Disassembly of iPod Support & iPod Spring”
• Refer to “Disassembly of iPod Base”
• Refer to “Disassembly of iPod P.C.B.”
• Refer to “Disassembly of iPod Support & iPod Spring”
• Refer to “Disassembly of iPod Base”
• Refer to “Disassembly of iPod P.C.B.”
Step 1 : Remove the Cradle Key.
Caution : During assembling, ensure the Cradle Key is
properly seated onto the 2 locators.
Caution : During assembling, ensure the Cradle Key is
properly seated onto the 2 locators.
10.9. Disassembly of Interlock
Switch P.C.B.
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Detach 5P wire at the connector (P941) on the Remote
Sensor P.C.B..
Sensor P.C.B..
Click on the first or last page to see other SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG service manuals if exist.