Panasonic SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG Service Manual ▷ View online
81
Step 8 : Use a tape to keep the centre switch (S643) pressed.
Step 9 : Place the Support Block to support the Front Panel
Block as shown.
Block as shown.
Step 10 : Connect 14P FFC at the connector (CN941) on
Remote Sensor P.C.B..
Step 11 : Connect 5P wire at the connector (P944) on Remote
Sensor P.C.B..
Remote Sensor P.C.B..
Step 11 : Connect 5P wire at the connector (P944) on Remote
Sensor P.C.B..
Step 12 : Check and repair the Panel P.C.B. according to the
diagram shown.
diagram shown.
82
11.3. Checking & Repairing of CD
Servo P.C.B.
Note : Insert CD before Checking the CD Servo P.C.B.
Step 1 : Remove the Base Stand Assembly.
Step 2 : Remove the Door Assembly.
Step 3 : Remove the Front Ornament Unit.
Step 4 : Remove the Front Panel Block.
Step 5 : Remove 1 screw.
Step 6 : Lift up the Panel P.C.B. with the Button Ornament Unit
as shown.
Step 2 : Remove the Door Assembly.
Step 3 : Remove the Front Ornament Unit.
Step 4 : Remove the Front Panel Block.
Step 5 : Remove 1 screw.
Step 6 : Lift up the Panel P.C.B. with the Button Ornament Unit
as shown.
Step 7 : Place the Panel P.C.B. on the Support Block.
Step 8 : Remove 3 screws.
Step 9 : Lift up the CD Mechanism.
Step 9 : Lift up the CD Mechanism.
Step 10 : Detach 30P FFC at the connector (CN6006) on the
Main P.C.B..
Main P.C.B..
83
Step 11 : Remove the CD Mechanism.
Step 12 : Place the CD Mechanism on the Insulating Material.
Step 13 : Connect 30P extension cable (REE1712) from
CN6006 on the Main P.C.B. to CN7002 on the CD Servo
P.C.B..
CN6006 on the Main P.C.B. to CN7002 on the CD Servo
P.C.B..
Step 14 : Use a tape to keep the centre switch (S643) pressed.
84
Step 15 : Place the Support Block to support the Front Panel
Block as shown.
Block as shown.
Step 16 : Connect 14P FFC at the connector (CN941) on
Remote Sensor P.C.B..
Step 17 : Connect 5P wire at the connector (P944) on Remote
Sensor P.C.B.
Remote Sensor P.C.B..
Step 17 : Connect 5P wire at the connector (P944) on Remote
Sensor P.C.B.
Step 18 : Check and repair the CD Servo P.C.B. according to
the diagram shown.
the diagram shown.
Click on the first or last page to see other SC-HC37EC / SC-HC37EE / SC-HC37EF / SC-HC37EG service manuals if exist.