Panasonic CR14C Service Manual ▷ View online
• Disassembly of Load Plate
Step 25: Position load plate as picture shown to remove it.
41
CR14C
10.3. Assembling of Mechanism
Unit
10.3.1. Assembly of UD Base Unit Parts
• Assembly of Load Plate
Step 1: Install load plate.
• Assembly of TRV Slide Plate Assy
Step 2: Attach the TRV slide plate to the sub slide plate.
Step 3: Slide the TRV slide plate until it stop.
Step 4: Slide the load plate until it stop.
Step 5: Install TRV slide plate assy align to groove and guide of
the UD base.
the UD base.
Step 6: Ensure the boss seated properly onto the groove.
42
CR14C
• Assembly of Load Lever
Step 7: Push as arrow shown to ensure the boss seated on
point (A).
point (A).
Step 8: Ensure both bosses align.
Step 9: Install load lever as shown, make sure the catch is fully
catched.
catched.
• Assembly of Switch Slider
Step 10: Push the guide until it stop.
Step 11: Fix the switch slider to the catches.
Note: Ensure the switch slider spring is fixed at the back of the
switch slider.
switch slider.
Step 12: Press down the switch slider and make sure it is fully
catched onto the UD base.
catched onto the UD base.
43
CR14C
• Assembly of Play Pinion
Step 13: Install the play pinion and press down.
• Assembly of CD Servo P.C.B.
Step 14: Connect CN7001.
Step 15: Fix 3 screws.
Step 16: Solder 4 solder points.
• Assembly of Traverse Unit
Step 17: Fix 4 floating rubbers.
44
CR14C
Click on the first or last page to see other CR14C service manuals if exist.