Panasonic CR14C Service Manual ▷ View online
9.2.2. Manually set to “PLAY” position
Step 1: Press both claws at the sides as arrows shown and
push the top cover backwards.
push the top cover backwards.
Step 2: Remove the top cover as arrows shown to release the
tray stoppers.
tray stoppers.
Step 3: Insert service jig into the traverse hole.
Step 4: Rotate the gear to “Mode” position.
21
CR14C
Step 5: Insert service jig into the loading hole.
Step 6: Rotate the gear to “Load/Upload” position.
Step 7: Insert service jig into the traverse hole, rotate the gear
counter clockwise.
counter clockwise.
Step 8: The tray gradually move to the play position.
22
CR14C
Step 9: Rotate the traverse hole continuously, until the swing
gear from position (A) to (B).
gear from position (A) to (B).
(Refer to Section 10.1 for disassembling of Traverse unit
assy.)
assy.)
23
CR14C
10.1. Disassembling and
assembling Traverse Unit
Assy in play position
Assy in play position
10.1.1. Disassembly of Traverse Unit Assy
Step 1: Release the catch and push the guide as arrows shown
to open both grooves.
to open both grooves.
Step 2: Detach the FFC wire from the adhesive area.
Step 3: Remove the traverse unit assy as arrows shown.
10 Disassembling and Assembling Procedure
24
CR14C
Click on the first or last page to see other CR14C service manuals if exist.