Panasonic CR14C Service Manual ▷ View online
10.2.3. Disassembly of Mecha Base Unit
Parts
• Follow (Step 1) to (Step 11) in item 10.2.1.
• Follow (Step 1) to (Step 3) in item 10.2.2.
• Follow (Step 1) to (Step 3) in item 10.2.2.
• Disassembly of Pitch Plate
Step 1: Remove 1 screw.
Step 2: Release the catches.
Step 3: Release guide.
Step 4: Remove the pitch plate as arrow shown.
• Disassembly of OC Drive Gear
29
CR14C
Step 5: Remove OC drive gear as arrow shown.
• Disassembly of Belt and Pulley Gear
Step 6: Remove belt.
Step 7: Remove pulley gear.
• Disassembly of Relay Gear and UD Drive Gear
Step 8: Remove relay gear and UD drive gear.
• Disassembly of Cam Gear
Step 9: Use a flathead screwdriver to push the catch inwards
and remove cam gear as arrows shown.
and remove cam gear as arrows shown.
30
CR14C
• Disassembly of Change Lever and Change Gear
Step 10: Release change lever’s bosses from the hooks and
remove both change lever and change gear together.
remove both change lever and change gear together.
• Illustration of the gears
• Disassembly of Trigger Link Lever
Step 11: Slide and hold the trigger link lever to the position as
picture shown.
picture shown.
Step 12: Release the trigger link spring.
Step 13: Remove the trigger link lever.
• Disassembly of Slider Arm
Step 14: Remove slider arm as arrows shown.
31
CR14C
• Disassembly of UD Cam Lock
Step 15: Release from the guides of the mecha base assy and
remove UD cam lock as arrows shown.
remove UD cam lock as arrows shown.
• Disassembly of UD Connection
Step 16: Push the catch and slide the UD cam R guide as
arrows shown.
arrows shown.
Step 17: Push up the UD connection from the centre and
detach it from the boss as arrows shown.
detach it from the boss as arrows shown.
32
CR14C
Click on the first or last page to see other CR14C service manuals if exist.