Panasonic CR14C Service Manual ▷ View online
Step 2: Ensure all catches are hooked to the Mecha P.C.B. and
Sensor P.C.B. then fix 2 screws.
Sensor P.C.B. then fix 2 screws.
• Assembly of Open Switch Lever
Step 3: Install open SW lever.
• Assembly of All Trigger Lever
Step 4: Ensure all trigger lever’s boss seated properly onto the
groove.
groove.
Step 5: Ensure the “U” shape of the all trigger lever snap to the
boss.
boss.
49
CR14C
• Assembly of Trigger Slider Assy
Step 6: Combine both trigger slider and trigger lever.
Step 7: Ensure trigger lever’s ribs seated properly onto the
grooves.
grooves.
Caution:
Do not exert force as it may cause damage to the trigger
lever.
lever.
Step 8: Install trigger slider assy, make sure the grooves fix
exactly onto the guides.
exactly onto the guides.
Step 9: Slide the trigger slider assy.
50
CR14C
• Assembly of UD Cam R Guide
Step 10: Insert the boss of the UD cam R guide onto mecha
base assy’s groove.
base assy’s groove.
Step 11: Ensure UD cam R guide seated properly onto the
guides and slide as arrow shown.
guides and slide as arrow shown.
• Assembly of UD Cam L Guide
Step 12: Install UD cam L guide align with all guides.
51
CR14C
• Assembly of UD Connection
Step 13: Slide the UD cam L guide until it stop as arrows
shown.
shown.
Step 14: Push the catch and slide the UD cam R guide as
arrows shown.
arrows shown.
Step 15: Slot the UD connection onto the boss (L) and turn to
the direction as arrow shown to slot onto boss (R) to install it.
the direction as arrow shown to slot onto boss (R) to install it.
52
CR14C
Click on the first or last page to see other CR14C service manuals if exist.