Panasonic CR14 Service Manual ▷ View online
• Disassembly of UD Cam L Guide
Step 18: Slide UD cam L guide as arrows shown.
Step 19: Ensure all guides align with the UD cam L guide’s
grooves and remove it as arrow shown.
grooves and remove it as arrow shown.
• Disassembly of UD Cam R Guide
Step 20: Ensure both guides align with the UD cam R guide’s
grooves and remove it as arrows shown.
grooves and remove it as arrows shown.
• Disassembly of Trigger Slider Assy
Step 21: Use a flathead screwdriver to release catch and slide
trigger slider assy to the end.
trigger slider assy to the end.
Step 22: Ensure all guides align with the trigger slider assy’s
grooves and remove it.
grooves and remove it.
33
CR14
Step 23: Press down individual ribs to detach trigger lever.
Caution:
Do not exert force as it may cause damage to the trigger
lever.
lever.
• Disassembly of Open Switch Lever
Step 24: Use a flathead screwdriver to push up the open switch
lever and remove it.
lever and remove it.
• Disassembly of All Trigger Lever
Step 25: Use a flathead screwdriver push the “U” shape and
push out the all trigger lever from the bottom.
push out the all trigger lever from the bottom.
• Disassembly of Mecha P.C.B. and Sensor P.C.B.
Step 26: Remove 2 screws.
Step 27: Release all catches to remove Mecha P.C.B. and
Sensor P.C.B.
Sensor P.C.B.
34
CR14
10.2.4. Disassembly of UD Base Unit
Parts
• Follow (Step 1) to (Step 11) in item 10.2.1.
• Disassembly of Tray Stoppers
Step 1: Remove tray stoppers.
Note: Ensure the tray stoppers are handle properly and keep
them in a safe place.
them in a safe place.
• Disassembly of Clamp Plate Assy
Step 2: Use a flathead screwdriver push the catch and
remove clamp plate assy as arrows shown.
remove clamp plate assy as arrows shown.
Note: Be careful of the other side catches when removing
the clamp plate assy.
the clamp plate assy.
• Disassembly of Change Arm
Step 3: Slide the TRV slide plate assy until the change arm at
the position shown and remove the change arm as arrow
shown.
the position shown and remove the change arm as arrow
shown.
• Disassembly of Load Lever
Step 4: Continue slide the TRV slide plate assy until the groove
at the position shown.
at the position shown.
Step 5: Release catch and remove load lever as arrows shown.
35
CR14
• Disassembly of Traverse Unit Assy
Step 6: Check if the swing gear is disengaged from the play
pinion before disassembly.
pinion before disassembly.
Caution:
If it is engaged, the following steps are necessary.
Step 7: Insert service jig into the traverse hole, rotate the gear
counter clockwise, ensure the swing gear is disengaged.
counter clockwise, ensure the swing gear is disengaged.
36
CR14
Click on the first or last page to see other CR14 service manuals if exist.