JBL SUB 140P EMC - CB Certificate ▷ View online
Page 49 of 75
TP10110019-ST
IEC/EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IECEN60065G
(cont.)
If this insulation forms part of a semiconductor
component (e.g. an optocoupler), there is no
distance through insulation requirement for the
insulation consisting of an insulating compound
completely filling the casing, so that
CLEARANCES and
component (e.g. an optocoupler), there is no
distance through insulation requirement for the
insulation consisting of an insulating compound
completely filling the casing, so that
CLEARANCES and
CREEPAGE DISTANCES do not exist, if the
component passes the electric strength test in the
accordance with the compliance clause below
and in addition:
component passes the electric strength test in the
accordance with the compliance clause below
and in addition:
-
passes the test and inspection criteria of 13.6
with an electric strength test of 10.3 using the
test voltage of 1,5 kV multiplied by 1,6, and
with an electric strength test of 10.3 using the
test voltage of 1,5 kV multiplied by 1,6, and
-
is subject to routine testing for electric
strength during manufacturing, using a test
voltage of 1,5 kV (for performance of the test
see N.2.1).
strength during manufacturing, using a test
voltage of 1,5 kV (for performance of the test
see N.2.1).
It is permitted to bridge this insulation with a
capacitor complying with IEC 60384-14:1993,
subclass Y2.
capacitor complying with IEC 60384-14:1993,
subclass Y2.
A capacitor classified Y3 according to IEC 60384-
14:1993, may bridge this insulation under the
following conditions:
14:1993, may bridge this insulation under the
following conditions:
-
the insulation requirements are satisfied by
having a capacitor classified Y3 as defined by
IEC 60384-14, which in addition to the Y3
testing, is tested with an Impulse test of 2.5
kV defined in IEC 62151, subclause 6.2.1;
having a capacitor classified Y3 as defined by
IEC 60384-14, which in addition to the Y3
testing, is tested with an Impulse test of 2.5
kV defined in IEC 62151, subclause 6.2.1;
-
the additional testing shall be performed on
all the test specimens as described in IEC
60384-14;
all the test specimens as described in IEC
60384-14;
-
the Impulse test of 2.5 kV is to be performed
before the Endurance Test in IEC 60384-14
in the sequence of tests as described in IEC
60384-14.
before the Endurance Test in IEC 60384-14
in the sequence of tests as described in IEC
60384-14.
Subclause 5.3.2 (Corrigendum 1):
Add after the fourth dash:
NOTE - In Sweden, exclusions are applicable for
equipment which is intended for connection to the
building installation wiring using screw terminals
or other reliable means, and for equipment which
is intended for connection to the building
installation wiring via an industrial plug and
socket -outlet or an appliance coupler, or both,
complying with IEC 60309 or with a comparable
national standard.
equipment which is intended for connection to the
building installation wiring using screw terminals
or other reliable means, and for equipment which
is intended for connection to the building
installation wiring via an industrial plug and
socket -outlet or an appliance coupler, or both,
complying with IEC 60309 or with a comparable
national standard.
N/A
Page 50 of 75
TP10110019-ST
IEC/EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IECEN60065G
Annex ZC (informative)
A-deviations
A-deviation: A national deviation due to regulations, the alteration of which
−
at least for the time being
−
outside the competence of the CEN/CENELEC member.
5.1
Italy
The following requirements shall be fulfilled:
- The power consumption in Watts (W) shall be
indicated on TV receivers and in their instruction
for use (Measurement according to EN 60555-2).
indicated on TV receivers and in their instruction
for use (Measurement according to EN 60555-2).
NOTE EN 60555-2 has since been replaced by
IEC 60107-1:1997.
IEC 60107-1:1997.
- TV receivers shall be provided with an
instruction for use, schematic diagrams and
adjustments procedure in Italian language.
instruction for use, schematic diagrams and
adjustments procedure in Italian language.
- Marking for controls and terminals shall be in
Italian language. Abbreviation and international
symbols are allowed provided that they are
explained in the instruction for use.
Italian language. Abbreviation and international
symbols are allowed provided that they are
explained in the instruction for use.
- The ECC manufacturers are bound to issue a
conformity declaration according to the above
requirements in the instruction manual. The
correct statement for conformity to be written in
the instruction manual, shall be:
conformity declaration according to the above
requirements in the instruction manual. The
correct statement for conformity to be written in
the instruction manual, shall be:
Questo apparecchio è fabbricato nella CEE nel
rispetto delle disposizioni del D.M. marzo 1992 ed
è in particolare conforme alle prescrizioni dell'art.
1 dello stesso D.M.
rispetto delle disposizioni del D.M. marzo 1992 ed
è in particolare conforme alle prescrizioni dell'art.
1 dello stesso D.M.
- The first importers of TV receivers manufactured
outside EEC are bound to submit the TV
receivers for previous conformity certification to
the Italian Post Ministry (PP.TT).
outside EEC are bound to submit the TV
receivers for previous conformity certification to
the Italian Post Ministry (PP.TT).
The TV receivers shall have on the backcover the
certification number in the following form:
certification number in the following form:
D.M. 26/03/1992 xxxxx/xxxxx/S or T or pT
S for stereo
T for teletext
pT for retrofitable teletext
Justification:
Ministerial Decree of 26 March 1992: National
rules for television receivers trade.
rules for television receivers trade.
NOTE The ministerial decree above contains
additional, but not safety relevant requirements.
additional, but not safety relevant requirements.
N/A
Page 51 of 75
TP10110019-ST
IEC/EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IECEN60065G
6.1
Germany
The following requirement applies:
For the operation of any cathode ray tube
intended for the display of visual images
operating at an acceleration voltage exceeding
40 kV, authorization is required, or application of
type approval (Bauartzulassung) and marking.
intended for the display of visual images
operating at an acceleration voltage exceeding
40 kV, authorization is required, or application of
type approval (Bauartzulassung) and marking.
Justification:
NOTE Contact address:
Physikalisch-Technische Bundesanstalt,
Bundesallee 100, D-38116 Braunschweig,
Bundesallee 100, D-38116 Braunschweig,
Tel.: Int+49-531-592-6320, Internet:
http://www.ptb.de
http://www.ptb.de
N/A
14
Sweden
The following is added:
Switches containing mercury such as
thermostats, relays and level controllers are not
allowed.
thermostats, relays and level controllers are not
allowed.
Justification:
Ordinance (1990:944) on Prohibition in
Connection with Handling, Importation and
Exportation of Chemical Products (Certain
Cases).
Connection with Handling, Importation and
Exportation of Chemical Products (Certain
Cases).
N/A
Page 52 of 75
TP10110019-ST
IEC/EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IECEN60065G
Supplement requirements for Subwoofer according to Amendment A11: 2008 of EN60065: 2002
2.2
Types of apparatus
2.2.Z1
Portable Sound System
N/A
Small battery powered audio equipment whose
prime purpose is to listen to recorded or
broadcasted sound
prime purpose is to listen to recorded or
broadcasted sound
N/A
Audio equipment uses headphones or earphones
that can be worn in or on or around the eats
that can be worn in or on or around the eats
No such devices are provided
N/A
Audio equipment allows the user to walk around
N/A
5
MARKING AND INSTRUCTIONS
5.4.1 za)
Instructions for excessive sound pressure
N/A
6
HAZARDOUS RADIATIONS
6.1
Ionizing radiation
N/A
Apparatus shall be so constructed that personal
protection against ionizing radiation is provided
under normal and fault operation conditions
protection against ionizing radiation is provided
under normal and fault operation conditions
No such device is provided
N/A
The dose-rate < 1
µ
Sv/h (0.1 mR/h)
N/A
Z1
Resistance to candle flame ignition
Television set shall be designed that the likelihood
of ignition and the spread of fire caused by a
candle flame is reduced
of ignition and the spread of fire caused by a
candle flame is reduced
No such device is provided
N/A
Click on the first or last page to see other SUB 140P service manuals if exist.