JBL ON TOUR XTB (serv.man8) EMC - CB Certificate ▷ View online
- Page 21 of 57 -
www.nemko.com
Report No. 111547
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
3.1.5 Beads
and
ceramic
insulators
No beads or similar ceramic
insulators on conductors.
insulators on conductors.
N/A
3.1.6
Screws for electrical contact pressure
No screws used for electrical
contact.
contact.
N/A
3.1.7
Insulating materials in electrical connections
No contact pressure through
insulating material.
insulating material.
N/A
3.1.8
Self-tapping and spaced thread screws
N/A
3.1.9 Termination
of
conductors
Class III equipment powered by
an external Limited Power
Source.
an external Limited Power
Source.
N/A
10 N pull test
N/A
3.1.10 Sleeving
on
wiring
No sleeving provided.
N/A
3.2
Connection to an a.c. mains supply or a d.c. mains supply
N/A
3.2.1 Means
of
connection
.......................................... :
Class III equipment. Unit is not
intended for direct connection to
a mains supply. Refer also to
Summary of testing.
intended for direct connection to
a mains supply. Refer also to
Summary of testing.
N/A
3.2.1.1
Connection to an a.c. mains supply
N/A
3.2.1.2
Connection to a d.c. mains supply
N/A
3.2.2
Multiple supply connections
N/A
3.2.3 Permanently
connected
equipment
N/A
Number of conductors, diameter (mm) of cable
and conduits ....................................................... :
and conduits ....................................................... :
—
3.2.4 Appliance
inlets
N/A
3.2.5
Power supply cords
N/A
3.2.5.1
AC power supply cords
N/A
Type .................................................................... :
—
Rated current (A), cross-sectional area (mm
2
),
AWG....................................................................:
—
3.2.5.2
DC power supply cords
N/A
3.2.6
Cord anchorages and strain relief
N/A
Mass of equipment (kg), pull (N) .......................:
—
Longitudinal
displacement
(mm)
........................:
—
3.2.7
Protection against mechanical damage
N/A
3.2.8 Cord
guards
N/A
D (mm); test mass (g) ........................................:
—
- Page 22 of 57 -
www.nemko.com
Report No. 111547
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
Radius of curvature of cord (mm) .......................:
—
3.2.9 Supply
wiring
space
N/A
3.3
Wiring terminals for connection of external conductors
N/A
3.3.1 Wiring
terminals
Class III equipment. Unit is not
intended for direct connection to
a mains supply. See attached
PSU report.
intended for direct connection to
a mains supply. See attached
PSU report.
N/A
3.3.2
Connection of non-detachable power supply
cords
cords
N/A
3.3.3 Screw
terminals
N/A
3.3.4
Conductor sizes to be connected
N/A
Rated current (A), cord/cable type, cross-
sectional area (mm
sectional area (mm
2
)........................................... :
—
3.3.5 Wiring
terminal
sizes
N/A
Rated current (A), type and nominal thread
diameter (mm) .................................................... :
diameter (mm) .................................................... :
—
3.3.6 Wiring
terminal
design
N/A
3.3.7
Grouping of wiring terminals
N/A
3.3.8 Stranded
wire
N/A
3.4
Disconnection from the mains supply
N/A
3.4.1 General
requirement
Class III equipment. Unit is not
intended for direct connection to
a mains supply.
intended for direct connection to
a mains supply.
N/A
3.4.2 Disconnect
devices
N/A
3.4.3 Permanently
connected
equipment
N/A
3.4.4
Parts which remain energized
N/A
3.4.5 Switches
in
flexible cords
N/A
3.4.6
Single-phase equipment and d.c. equipment
N/A
3.4.7 Three-phase
equipment
N/A
3.4.8
Switches as disconnect devices
N/A
3.4.9
Plugs as disconnect devices
N/A
3.4.10 Interconnected
equipment
N/A
3.4.11 Multiple
power
sources
N/A
- Page 23 of 57 -
www.nemko.com
Report No. 111547
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
3.5
Interconnection of equipment
N/A
3.5.1 General
requirements
N/A
3.5.2
Types of interconnection circuits ......................... :
SELV circuits only.
N/A
3.5.3
ELV circuits as interconnection circuits
No ELV interconnections.
N/A
4 PHYSICAL
REQUIREMENTS
P
4.1 Stability
P
Angle of 10
°
Unit does not overbalance at
10°.
10°.
P
Test:
force
(N) ...................................................... :
The unit is not floor-standing.
N/A
4.2 Mechanical
strength
N/A
4.2.1 General
Class III equipment for supply
from LPS source. Only functional
insulation provided. No shock or
energy hazard, no test
considered necessary.
from LPS source. Only functional
insulation provided. No shock or
energy hazard, no test
considered necessary.
N/A
4.2.2
Steady force test, 10 N
N/A
4.2.3
Steady force test, 30 N
N/A
4.2.4
Steady force test, 250 N
N/A
4.2.5 Impact
test
N/A
Fall
test
N/A
Swing
test
N/A
4.2.6 Drop
test
N/A
4.2.7
Stress relief test
No shock or energy hazard, no
test considered necessary.
test considered necessary.
N/A
4.2.8 Cathode
ray
tubes
CRT(s) not used in the
equipment.
equipment.
N/A
Picture tube separately certified .........................:
N/A
4.2.9 High
pressure
lamps
No high-pressure lamps in the
equipment.
equipment.
N/A
4.2.10 Wall
or
ceiling mounted equipment; force (N) ...:
Not intended to be mounted on a
wall or ceiling.
wall or ceiling.
N/A
4.3
Design and construction
P
4.3.1
Edges and corners
All edges and corners are
rounded and/or smoothed.
rounded and/or smoothed.
P
- Page 24 of 57 -
www.nemko.com
Report No. 111547
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
4.3.2
Handles and manual controls; force (N) .............:
No knobs, grips, handles, lever
etc.
etc.
N/A
4.3.3
Adjustable controls
No hazardous adjustable
controls.
controls.
N/A
4.3.4
Securing of parts
No loosening of parts is likely to
occur.
occur.
P
4.3.5
Connection of plugs and sockets
SELV connectors do not comply
with IEC 60320 or IEC 60083.
with IEC 60320 or IEC 60083.
P
4.3.6 Direct
plug-in
equipment
Not intended to plug directly into
a wall socket-outlet.
a wall socket-outlet.
N/A
Dimensions (mm) of mains plug for direct plug-in
............................................................................ :
N/A
Torque and pull test of mains plug for direct
plug-in; torque (Nm); pull (N) .............................. :
plug-in; torque (Nm); pull (N) .............................. :
N/A
4.3.7
Heating elements in earthed equipment
No heating elements provided.
N/A
4.3.8 Batteries
Refer to summary of testing and
appended table 4.3.8.
appended table 4.3.8.
P
4.3.9
Oil and grease
Insulation is not exposed to oil,
grease etc.
grease etc.
N/A
4.3.10
Dust, powders, liquids and gases
The equipment does not
generate dust, powders, liquids
and gases, and does not contain
flammable liquids or gases.
generate dust, powders, liquids
and gases, and does not contain
flammable liquids or gases.
N/A
4.3.11
Containers for liquids or gases
No containers for liquids or
gases in the equipment.
gases in the equipment.
N/A
4.3.12 Flammable
liquids ...............................................:
The equipment does not contain
flammable liquid.
flammable liquid.
N/A
Quantity of liquid (l) .............................................:
N/A
Flash point (
°C) ...................................................:
N/A
4.3.13
Radiation; type of radiation ................................:
The equipment does not
generate radiation.
generate radiation.
N/A
4.3.13.1 General
N/A
4.3.13.2 Ionizing
radiation
N/A
Measured
radiation
(pA/kg)
................................ :
—
Measured
high-voltage
(kV)
................................ :
—
Measured focus voltage (kV) .............................. :
—
CRT
markings
..................................................... :
—
4.3.13.3
Effect of ultraviolet (UV) radiation on materials
N/A
Click on the first or last page to see other ON TOUR XTB (serv.man8) service manuals if exist.