JBL ON CALL (serv.man2) EMC - CB Certificate ▷ View online
Page 25 of 99
ST-06153
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF No.: IECEN60950_1A
5.3
Abnormal operating and fault conditions
5.3.1
Protection against overload and abnormal
operation
operation
(see appended table 5.3)
P
5.3.2
Motors
No such devices
N/A
5.3.3
Transformers
(see appended table 5.3 and
Annex C)
Annex C)
P
5.3.4 Functional
insulation ...........................................: Methods a), b) and c)
P
5.3.5
Electromechanical components
No such components within
EUT
EUT
N/A
5.3.6
Simulation of faults
(see appended table 5.3)
P
5.3.7
Unattended equipment
There are no thermostats and
similar components within the
EUT
similar components within the
EUT
N/A
5.3.8
Compliance criteria for abnormal operating and
fault conditions
fault conditions
P
Page 26 of 99
ST-06153
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF No.: IECEN60950_1A
6
CONNECTION TO TELECOMMUNICATION NETWORKS
6.1
Protection of telecommunication network service persons, and users of
other equipment connected to the network, from hazards in the equipment
other equipment connected to the network, from hazards in the equipment
6.1.1
Protection from hazardous voltages
N/A
6.1.2
Separation of the telecommunication network from earth
N/A
6.1.2.1 Requirements
N/A
Test
voltage (V) ..................................................:
Current in the test circuit (mA) .........................:
6.1.2.2 Exclusions ...........................................................:
N/A
6.2
Protection of equipment users from overvoltages on telecommunication
networks
networks
6.2.1 Separation
requirements
N/A
6.2.2
Electric strength test procedure
N/A
6.2.2.1 Impulse
test
N/A
6.2.2.2 Steady-state
test
N/A
6.2.2.3 Compliance
criteria
N/A
6.3
Protection of the telecommunication wiring system from overheating
Max. output current (A) .......................................:
Current
limiting method.......................................:
Page 27 of 99
ST-06153
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF No.: IECEN60950_1A
7
CONNECTION TO CABLE DISTRIBUTION SYSTEMS
7.1
Protection of cable distribution system service
persons, and users of other equipment
connected to the system, from hazardous
voltages in the equipment
persons, and users of other equipment
connected to the system, from hazardous
voltages in the equipment
N/A
7.2
Protection of equipment users from overvoltages
on the cable distribution system
on the cable distribution system
N/A
7.3
Insulation between primary circuits and cable
distribution systems
distribution systems
N/A
7.3.1 General
N/A
7.3.2
Voltage surge test
N/A
7.3.3 Impulse
test
N/A
Page 28 of 99
ST-06153
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF No.: IECEN60950_1A
A
ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
A.1
Flammability test for fire enclosures of movable equipment having a total mass
exceeding 18 kg, and of stationary equipment (see 4.7.3.2)
exceeding 18 kg, and of stationary equipment (see 4.7.3.2)
N/A
A.1.1 Samples ..............................................................:
Wall thickness (mm)............................................:
A.1.2
Conditioning of samples; temperature (
°C).........: N/A
A.1.3 Mounting
of
samples ...........................................: N/A
A.1.4 Test
flame
N/A
A.1.5 Test
procedure
N/A
A.1.6 Compliance
criteria
N/A
Sample 1 burning time (s)...................................:
Sample 2 burning time (s)...................................:
Sample 3 burning time (s)...................................:
A.2
Flammability test for fire enclosures of movable equipment having a total mass not
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
N/A
A.2.1 Samples, material ...............................................:
Wall thickness (mm)............................................:
A.2.2 Conditioning
of
samples
N/A
A.2.3
Mounting of samples
N/A
A.2.4 Test
flame
N/A
A.2.5 Test
procedure
N/A
A.2.6 Compliance
criteria
N/A
Sample 1 burning time (s)...................................:
Sample 2 burning time (s)...................................:
Sample 3 burning time (s)...................................:
A.2.7
Alternative test acc. to IEC 60695-2-2, cl. 4, 8
N/A
Sample 1 burning time (s)...................................:
Sample 2 burning time (s)...................................:
Sample 3 burning time (s)...................................:
A.3
Hot flaming oil test (see 4.6.2)
N/A
A.3.1
Mounting of samples
N/A
Click on the first or last page to see other ON CALL (serv.man2) service manuals if exist.