JBL ON BEAT XTREME (serv.man8) EMC - CB Certificate ▷ View online
This Test Report, when bearing the Nemko name and logo is only valid when issued by a Nemko laboratory,
or by a laboratory having special agreement with Nemko.
or by a laboratory having special agreement with Nemko.
Test Report issued under the responsibility of
www.nemko.com
TEST REPORT
IEC 60065
Audio, video and similar electronic apparatus - Safety requirements
Report Reference No. .................... :
171153
Date of issue .................................... :
2011-03-18
Total number of pages ..................... :
42 pages and refer to page 6.
CB Testing Laboratory .................. :
Nemko Korea Co., Ltd.
Phone: (+82) 31 322 2333
Address ............................................ :
296, Osan-Ri, Mohyeon-Myeon, Cheoin-Gu,Yongin-Si,
Gyeonggi-Do, KOREA 449-852
Gyeonggi-Do, KOREA 449-852
Applicant’s name ........................... :
Harman Consumer Inc.
Address ............................................ :
Test specification:
Standard ........................................... :
IEC 60065:2001 (Seventh Edition) + A1:2005
Test procedure ................................. :
CB Scheme
Non-standard test method…………..:
N/A
Test Report Form No. .................... :
IEC60065J
Test Report Form(s) Originator ........ :
Intertek Semko AB
Master TRF ...................................... :
2009-06
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright
owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's
interpretation of the reproduced material due to its placement and context.
owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's
interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB
scheme procedure shall be removed.
scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
Test item description ..................... :
ipad speaker docking system with Bluetooth
Trade Mark ....................................... :
Manufacturer .................................... :
Harman Consumer Inc.
Model/Type reference ...................... :
JBL® OnBeat Xtreme™
Ratings ............................................. :
35W, 100-240V~, 50/60Hz, Class II,
Page 3 of 42
Report No.: 171153
TRF No. IEC60065J
Summary of testing:
Instructions
(Clause 5.4)
(Clause 5.4)
Instructions/users manual is only in English.
The information shall be given in a language
acceptable to the country where the apparatus in
intended to be sold.
The information shall be given in a language
acceptable to the country where the apparatus in
intended to be sold.
Plug / External flexible cords
(Clause 15 and 16)
(Clause 15 and 16)
This test report does not cover the mains cord set
except for listed type in list of critical components.
Must be supplied with an approved cord/plug
suitable for the countries where the requirement
will be sold.
except for listed type in list of critical components.
Must be supplied with an approved cord/plug
suitable for the countries where the requirement
will be sold.
Tests performed (name of test and test clause):
5 Marking and instructions
7 Heating under normal operating conditions
8 Constructional requirements with regard to the
5 Marking and instructions
7 Heating under normal operating conditions
8 Constructional requirements with regard to the
protection against electric shock
9 Electric shock hazard under normal operating
conditions
10 Insulation requirements
11 Fault conditions
12 Mechanical strength
13 Clearances and creepage distances
17 Electrical connections and mechanical fixings
conditions
10 Insulation requirements
11 Fault conditions
12 Mechanical strength
13 Clearances and creepage distances
17 Electrical connections and mechanical fixings
Testing location:
Refer to page 2
Refer to page 2
Summary of compliance with National Differences:
The sample(s) tested complies with the requirements of IEC 60065:2001 (Seventh Edition) + A1:2005
and EN 60065:2002 + A1:2006 + A11:2008.
European Group Differences and National Differences for A1 and A11 are attached as appendices.
This
The sample(s) tested complies with the requirements of IEC 60065:2001 (Seventh Edition) + A1:2005
and EN 60065:2002 + A1:2006 + A11:2008.
European Group Differences and National Differences for A1 and A11 are attached as appendices.
This
apparatus is also covered the National Differences for Australia, Canada, United States of America
(USA), Singapore, Korea, Japan and China, but National Differences for China is not announced yet,
and not attached in this test report.
and not attached in this test report.
Page 4 of 42
Report No.: 171153
TRF No. IEC60065J
Copy of marking plate
Click on the first or last page to see other ON BEAT XTREME (serv.man8) service manuals if exist.