JBL ESC Xcite EMC - CB Certificate ▷ View online
page 29 of 34
Ref. No.:408507
IEC 60065
Clause
Requirement - Test
Result - Remark
Verdict
ZB
ANNEX ZB TO EN 60065, SPECIAL NATIONAL CONDITIONS
2.6.1
DK: certain types of Class
Ι apparatus, see 15.1.1,
may be provided with a plug not establishing
earthing continuity when inserted in Danish socket-
outlets
earthing continuity when inserted in Danish socket-
outlets
N
15.1.1
DK: mains cord for single-phase equipment having
a rated current not exceeding 10 A shall be
provided with a plug according to Heavy Current
Regulations Section 107-2-D1
a rated current not exceeding 10 A shall be
provided with a plug according to Heavy Current
Regulations Section 107-2-D1
P
DK: Class
Ι equipment with socket-outlets with
earthing contact, or which are intended to be used
in locations where protection against indirect
contact is required shall be provided with a plug in
compliance with Standard Sheet DK 2-1a
in locations where protection against indirect
contact is required shall be provided with a plug in
compliance with Standard Sheet DK 2-1a
N
DK: socket-outlets for providing power to Class
ΙΙ
equipment with a rated current of 2.5 A shall have
dimensions according to the drawing on page 131
of EN 60065:98 other dimensions shall be to
IEC 60083 Standard Sheet C 1a for portable
socket-outlets
dimensions according to the drawing on page 131
of EN 60065:98 other dimensions shall be to
IEC 60083 Standard Sheet C 1a for portable
socket-outlets
N
DK: mains socket-outlets with earthing contact
shall comply with Heavy Current Regulations
Section 107-2-D1, Standard Sheet DK 1-3a,
DK 1-5a or DK 1-7a
shall comply with Heavy Current Regulations
Section 107-2-D1, Standard Sheet DK 1-3a,
DK 1-5a or DK 1-7a
N
GB: equipment fitted with a flexible cable or cord
provided with a 13A BS 1363 plug as in Statutory
Instrument 1768:94
provided with a 13A BS 1363 plug as in Statutory
Instrument 1768:94
P
IE: equipment fitted with a flexible cable or cord
provided with a 13 A plug in accordance with
Statutory Instrument 525:97
provided with a 13 A plug in accordance with
Statutory Instrument 525:97
P
NO: mains socket-outlets on Class
ΙΙ equipment meet CEE Publication 7 with the
following amendments:
- dimensions 2.5 A, 250 V socket-outlets shall
comply with Standard Sheet 1 page 132 of
EN 60065:98
comply with Standard Sheet 1 page 132 of
EN 60065:98
N
- mechanical strength 2.5 A, 250 V socket-outlets
tested as specified in EN 60065, 12.1.3
tested as specified in EN 60065, 12.1.3
N
- protecting rim also tested
N
page 30 of 34
Ref. No.:408507
IEC 60065
Clause
Requirement - Test
Result - Remark
Verdict
B.5.4.1
NO: marking required for equipment connected to
a communications network other than the public
telecommunications network, where separation
between the mains and the network relies upon a
safety earth connection
a communications network other than the public
telecommunications network, where separation
between the mains and the network relies upon a
safety earth connection
N
NO: marking to state equipment must be
connected to an earthed mains socket-outlet
connected to an earthed mains socket-outlet
N
SE: marking required on equipment connected to
a telecommunication network, where separation
between the mains and the network relies on
connection to protective earth
a telecommunication network, where separation
between the mains and the network relies on
connection to protective earth
N
SE: marking to state equipment must be
connected to an earthed mains socket-outlet
connected to an earthed mains socket-outlet
N
B.8.1
DK: method b) of 8.1 is permitted only for
permanently connected equipment
permanently connected equipment
N
NO: method b) of 8.1 is not permitted. Double or
reinforced insulation is required between parts
connected to the mains and parts connected to the
public telecommunications network
reinforced insulation is required between parts
connected to the mains and parts connected to the
public telecommunications network
N
B.14.12
DK: surge suppressors between
telecommunications network and accessible parts
permitted only for permanently connected
equipment
telecommunications network and accessible parts
permitted only for permanently connected
equipment
N
NO: surge suppressors between TNV circuits and
accessible parts of Class
accessible parts of Class
Ι equipment permitted
only if the equipment is marked stating it must be
connected to an earthed mains socket-outlet
connected to an earthed mains socket-outlet
N
SE: surge suppressors between TNV circuits and
accessible parts of Class
accessible parts of Class
Ι equipment permitted
only if the equipment is marked stating it must be
connected to an earthed mains socket-outlet, the
marking text is: "Apparaten skall anslutas till jordat
uttag"
connected to an earthed mains socket-outlet, the
marking text is: "Apparaten skall anslutas till jordat
uttag"
N
page 31 of 34
Ref. No.:408507
IEC 60065
Clause
Requirement - Test
Result - Remark
Verdict
ZC
ANNEX ZC TO EN 60065, A-DEVIATIONS
5
DE: additional markings required in German language:
- cathode ray tubes with an accelerating voltage
between 20 kV and 30 kV (marking on the tube)
between 20 kV and 30 kV (marking on the tube)
N
- TV receivers whose picture tube has an
accelerating voltage between 20 kV and 30 kV
accelerating voltage between 20 kV and 30 kV
N
- TV receivers whose picture tube has an
accelerating voltage greater than 30 kV
accelerating voltage greater than 30 kV
N
- TV receivers whose picture tube has an
accelerating voltage less than 20 kV
accelerating voltage less than 20 kV
N
5.1
IT: additional markings on the outside of the TV
receiver in Italian language
receiver in Italian language
N
IT: user instructions in Italian language including a
conformity declaration
conformity declaration
N
IT: certification number on the back cover
N
6.1
DE: ionizing radiation from TV receivers not
exceeding 1
exceeding 1
µSv/h (= 7.2 pA/kg = 0.1 mR/h) at
10 cm
N
page 32 of 34
Ref. No.:408507
IEC 60065
Clause
Requirement - Test
Result - Remark
Verdict
National differences for Singapore
(These differences are taken from IEC 60065:1993 and adopted to IEC 60065:1998)
IEC 60065:1998
Clauses: 4, 7,9,10,16.
SG 03
Throughout the standard, whenever the words "white pine board" appear, insert
the words "or plywood board" to it.
the words "or plywood board" to it.
Noted
SS143 Amendment No. 1 and No. 2
4.1.3
(4.1.3)*
Delete "45 % to 75 %" and insert 65 ± 5 %.
75% maximum in
IEC 60065: 1998
IEC 60065: 1998
P
7.1
(7.1)
Resistance to heat without external forces.
Adopt the temperature specified for the tropical conditions.
P
8.6
(9.3.4)
Delete the note " A Quality Assessment System for
capacitors complying with Subclause 14.2 is under
consideration in the IEC".
capacitors complying with Subclause 14.2 is under
consideration in the IEC".
This is not in
IEC 60065:1998.
IEC 60065:1998.
Noted
10.2
(10.2)
Humidity treatment
Adopt the testing conditions designed for tropical
conditions.
conditions.
120 h at a relative
humidity of 93%.
humidity of 93%.
P
16
(16)
External flexible cords
Delete "IEC Publication 60227: Polyvinyl Chloride Insulated
Cables of Rated Voltages up to and Including 450/750 V
and IEC publication 60245: Rubber insulated Cables of
rated up to and including 450/750 V " and insert "Singapore
Standard 236: Flexible Cords", whenever they appear in
this clause.
Cables of Rated Voltages up to and Including 450/750 V
and IEC publication 60245: Rubber insulated Cables of
rated up to and including 450/750 V " and insert "Singapore
Standard 236: Flexible Cords", whenever they appear in
this clause.
Delete "CEE Publication 13, CEE Publication 2 and IEC
Publication 60173: Colours of the Cores of Flexible Cables
and Cords" whenever they appear in this clause.
Publication 60173: Colours of the Cores of Flexible Cables
and Cords" whenever they appear in this clause.
Noted
16.2
(16.2)
Delete the notes in small print and insert "A nominal cross-
sectional area of 0.75 mm² will satisfy this requirement".
sectional area of 0.75 mm² will satisfy this requirement".
This is not in
IEC 60065:1998.
IEC 60065:1998.
Noted
* in parenthesis: clauses acc. to IEC 60065:1993
Click on the first or last page to see other ESC Xcite service manuals if exist.