JBL ENCOUNTER (serv.man4) EMC - CB Certificate ▷ View online
- Page 29 of 51 -
www.nemko.com
Report No. 27772
TRF No.:IECEN60950_1B
K
ANNEX K, THERMAL CONTROLS (see 1.5.3 and 5.3.7)
N/A
K.1
Making and breaking capacity
No thermal controls.
N/A
K.2
Thermostat reliability; operating
voltage (V) .......................................................
voltage (V) .......................................................
—
K.3
Thermostat endurance test; operating
voltage (V) .....................................................
voltage (V) .....................................................
—
K.4
Temperature limiter endurance;
operating voltage (V) ................................
operating voltage (V) ................................
—
K.5
Thermal cut-out reliability
—
K.6
Stability of operation
(see appended table 5.3)
—
L
ANNEX L, NORMAL LOAD CONDITIONS FOR SOME TYPES OF ELECTRICAL
BUSINESS EQUIPMENT (see 1.2.2.1 and 4.5.1)
BUSINESS EQUIPMENT (see 1.2.2.1 and 4.5.1)
N/A
L.1
Typewriters
—
L.2
Adding machines and cash registers
—
L.3
Erasers
—
L.4
Pencil sharpeners
—
L.5
Duplicators and copy machines
—
L.6
Motor-operated files
—
L.7
Other business equipment
—
M
ANNEX M, CRITERIA FOR TELEPHONE RINGING SIGNALS (see 2.3.1)
—
M.1
Introduction
No ringing signals.
N/A
M.2
Method A
—
M.3
Method B
—
M.3.1
Ringing signal
—
M.3.1.1
Frequency (Hz) ...............................................
—
M.3.1.2
Voltage (V) .....................................................
—
M.3.1.3
Cadence; time (s), voltage (V) ..........................
—
M.3.1.4
Single fault current (mA) ................................
—
M.3.2
Tripping device and monitoring voltage
................................................................
................................................................
—
M.3.2.1
Conditions for use of a tripping device
or a monitoring voltage
or a monitoring voltage
—
M.3.2.2
Tripping device
—
M.3.2.3
Monitoring voltage (V) ................................
—
- Page 30 of 51 -
www.nemko.com
Report No. 27772
TRF No.:IECEN60950_1B
N
ANNEX N, IMPULSE TEST GENERATORS (see 2.10.3.4, 6.2.2.1, 7.3.2 and
clause G.5)
clause G.5)
N/A
N.1
ITU-T impulse test generators
—
N.2
IEC 60065 impulse test generator
—
P
ANNEX P, NORMATIVE REFERENCES
N/A
Q
ANNEX Q, BIBLIOGRAPHY
N/A
R
ANNEX R, EXAMPLES OF REQUIREMENTS FOR QUALITY CONTROL
PROGRAMMES
PROGRAMMES
N/A
R.1
Minimum separation distances for
unpopulated coated printed boards
(see 2.10.6)
unpopulated coated printed boards
(see 2.10.6)
—
R.2
Reduced clearances (see 2.10.3)
—
S
ANNEX S, PROCEDURE FOR IMPULSE TESTING (see 6.2.2.3)
N/A
S.1
Test equipment
—
S.2
Test procedure
—
S.3
Examples of waveforms during
impulse testing
impulse testing
—
T
ANNEX T, GUIDANCE ON PROTECTION AGAINST INGRESS OF WATER
(see 1.1.2)
(see 1.1.2)
N/A
—
U
ANNEX U, INSULATED WINDING WIRES FOR USE WITHOUT INTERLEAVED
INSULATION (see 2.10.5.4)
INSULATION (see 2.10.5.4)
N/A
—
V
ANNEX V, AC POWER DISTRIBUTION SYSTEMS (see 1.6.1)
N/A
V.1
Introduction
—
V.2
TN power distribution systems
—
W
ANNEX W, SUMMATION OF TOUCH CURRENTS
N/A
W.1
Touch current from electronic circuits
Class III Equipment.
N/A
W.1.1
Floating circuits
—
W.1.2
Earthed circuits
—
W.2
Interconnection of several equipments
Class III Equipment.
N/A
- Page 31 of 51 -
www.nemko.com
Report No. 27772
TRF No.:IECEN60950_1B
W.2.1
Isolation
—
W.2.2
Common return, isolated from earth
—
W.2.3
Common return, connected to
protective earth
protective earth
—
X
ANNEX X, MAXIMUM HEATING EFFECT IN TRANSRORMER TESTS (see clause
C.1)
C.1)
N/A
X.1
Determination of maximum input
current
current
—
X.2
Overload test procedure
—
Y
ANNEX Y, ULTRAVIOLET LIGHT CONDITIONING TEST (see 4.3.13.3)
N/A
Y.1
Test apparatus ................................................
—
Y.2
Mounting of test samples ................................
—
Y.3
Carbon-arc light-exposure apparatus ................
—
Y.4
Xenon-arc light exposure apparatus ..................
—
- Page 32 of 51 -
www.nemko.com
Report No. 27772
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
CENELEC COMMON MODIFICATIONS [C], SPECIAL NATIONAL CONDITIONS [S] AND
A-DEVIATIONS (NATIONAL DEVIATIONS) [A] (EN 60950-1:2001 + A11:2004)
A-DEVIATIONS (NATIONAL DEVIATIONS) [A] (EN 60950-1:2001 + A11:2004)
General
C: Delete all the "country" notes in the reference
document according to the following list:
document according to the following list:
1.1.5
Note 2
1.5.8
Note 2
1.6.1
Note
1.7.2
Note 4
1.7.12
Note 2
2.1
Note
2.2.3
Note
2.2.4
Note
2.3.2
Note 2, 7, 8
2.3.3
Note 1, 2
2.3.4
Note 2,3 2.7.1
Note
2.10.3.1 Note 4
3.2.1.1
Note
3.2.3
Note 1, 2
3.2.5.1 Note 2
4.3.6
Note 1,2 4.7.2.2 Note
4.7.3.1 Note 2
6.1.2.1
Note
6.1.2.2 Note
6.2.2
Note
6.2.2.1
Note 2
6.2.2.2 Note
7
Note 4
7.1
Note
G2.1
Note 1, 2
Annex H Note 2
Considered.
—
1.2.4.1
S (DK): Certain types of Class I appliances (see
3.2.1.1) may be provided with a plug not
establishing earthing conditions when inserted into
Danish socket-outlets.
3.2.1.1) may be provided with a plug not
establishing earthing conditions when inserted into
Danish socket-outlets.
Class III equipment.
N/A
1.5.1
A (SE, Ordinance 1990:944) and
(CH, Ordinance on environmentally hazardous
substances SR 814.013, Annex 3.2, Mercury):
Add the following:
(CH, Ordinance on environmentally hazardous
substances SR 814.013, Annex 3.2, Mercury):
Add the following:
NOTE – Switches containing mercury such as thermostats,
relays and level controllers are not allowed.
relays and level controllers are not allowed.
There are no components
containing mercury in the
equipment.
containing mercury in the
equipment.
N/A
1.5.8
S (NO): Due to the IT power system used (see
annex V, Fig. V.7), capacitors are required to be
rated for the applicable line-to-line voltage
(230 V).
annex V, Fig. V.7), capacitors are required to be
rated for the applicable line-to-line voltage
(230 V).
Class III equipment.
N/A
1.7.2
S (FI, NO, SE): C
LASS
I
PLUGGABLE EQUIPMENT
TYPE
A intended for connection to other equipment
or a network shall, if safety relies on connection to
protective earth or if surge suppressors are
connected between the network terminals and
accessible parts, have a marking stating that the
equipment must be connected to an earthed
mains socket-outlet.
protective earth or if surge suppressors are
connected between the network terminals and
accessible parts, have a marking stating that the
equipment must be connected to an earthed
mains socket-outlet.
The marking text in the applicable countries shall
be as follows:
be as follows:
The equipment is not for
connection to a network.
connection to a network.
N/A
FI: "Laite on liitettävä suojamaadoituskoskettimilla
varustettuun pistorasiaan"
varustettuun pistorasiaan"
Class III equipment.
N/A
NO: "Apparatet må tilkoples jordet stikkontakt"
Class III equipment.
N/A
SE: "Apparaten skall anslutas till jordat uttag"
Class III equipment.
N/A
A (DK, Heavy Current Regulations): Supply cords
of
of
CLASS
I
EQUIPMENT
, which is delivered without a
Class III equipment.
N/A
Click on the first or last page to see other ENCOUNTER (serv.man4) service manuals if exist.