JBL DUET III EMC - CB Certificate ▷ View online
- Page 4 of 51 -
www.nemko.com
Report No. 116366
TRF No.:IECEN60950_1B
Summary of testing:
Tested according to national requirements
for the following countries:
for the following countries:
All CENELEC members as listed in EN 60950-1:2001.
All CB members as listed in CB Bulletin 112A, December
2006, except Israeli difference.
List from IEC 60950-1: 2001 edition:
Australian differences: CB Bulletin 112A, December 2006
Canadian differences: CB Bulletin 112A, December 2006
Korean differences: CB Bulletin 112A, December 2006
US differences: CB Bulletin 112A, December 2006
Singapore differences: CB Bulletin 112A, December 2006
Israeli differences: (not related to CB Bulletin 112A,
December 2006)
Chinese differences: CB Bulletin 112A, December 2006
Japanese differences: CB Bulletin 112A, December 2006
All CB members as listed in CB Bulletin 112A, December
2006, except Israeli difference.
List from IEC 60950-1: 2001 edition:
Australian differences: CB Bulletin 112A, December 2006
Canadian differences: CB Bulletin 112A, December 2006
Korean differences: CB Bulletin 112A, December 2006
US differences: CB Bulletin 112A, December 2006
Singapore differences: CB Bulletin 112A, December 2006
Israeli differences: (not related to CB Bulletin 112A,
December 2006)
Chinese differences: CB Bulletin 112A, December 2006
Japanese differences: CB Bulletin 112A, December 2006
Radio and television interference
suppression Compliance with the EMC
directive is necessary for achieving type
certification. The appliance shall comply
with the relevant EMC standards,
depending on the equipment in question.
In NO, compliance with standards for radio
interference suppression is a part of
Nemko’s certification.
In FI, DK and SE compliance is not
necessary for achieving safety certification.
suppression Compliance with the EMC
directive is necessary for achieving type
certification. The appliance shall comply
with the relevant EMC standards,
depending on the equipment in question.
In NO, compliance with standards for radio
interference suppression is a part of
Nemko’s certification.
In FI, DK and SE compliance is not
necessary for achieving safety certification.
The product must be complied with relevant standard when
marketed into specific country.
marketed into specific country.
1.5, 2.5. 3.2 External Power Supply
The external power supply was evaluated as part of this
report. External power supplies model S024Ez1800120 /
JBL approved to IEC 60950 (Report No. 12014166 001 by
TUV Rh) are provided. The external power supply output
are separately certified as limited power source, complying
with the national regulations of the countries in which the
appliance is to be sold.
report. External power supplies model S024Ez1800120 /
JBL approved to IEC 60950 (Report No. 12014166 001 by
TUV Rh) are provided. The external power supply output
are separately certified as limited power source, complying
with the national regulations of the countries in which the
appliance is to be sold.
1.7.12
Language of safety markings/instructions.
Language of safety markings/instructions.
Instructions and equipment marking related to safety is
applied in the language that is acceptable in the country in
which the equipment is to be sold.
applied in the language that is acceptable in the country in
which the equipment is to be sold.
- Page 5 of 51 -
www.nemko.com
Report No. 116366
TRF No.:IECEN60950_1B
List of attachments:
Photos (4 pages)
Australian differences (8 pages)
Canadian differences (5 pages)
Australian differences (8 pages)
Canadian differences (5 pages)
Korean differences (1 page)
US differences (5 pages)
Israeli differences (1 page)
Singapore differences (2 pages)
Chinese differences (1 page)
Japanese differences (6 pages)
Chinese differences (1 page)
Japanese differences (6 pages)
PSU CB test report 12014166001 with CB certificate JPTUV-014962 from TUV Rheinland Japan Ltd.(73
pages)
pages)
- Page 6 of 51 -
www.nemko.com
Report No. 116366
TRF No.:IECEN60950_1B
Test items particulars
Equipment mobility ..................................... : Movable
Operating condition ..................................... : continuous
Equipment mobility ..................................... : Movable
Operating condition ..................................... : continuous
Normal operating condition: Supplied 1KHz sine wave for
speakers in computer speaker system and obtain 1/8
Maximum non-clipped output power
speakers in computer speaker system and obtain 1/8
Maximum non-clipped output power
Mains supply tolerance (%)......................... : N/A
Tested for IT power systems ...................... : No
IT testing, phase-phase voltage (V) :
Tested for IT power systems ...................... : No
IT testing, phase-phase voltage (V) :
N/A
Class of equipment ..................................... : Class III
Mass of equipment (kg)............................... : Weight: 1.12 kg
Mass of equipment (kg)............................... : Weight: 1.12 kg
Dimension: 300 x 116 x 116mm
(the two have same size)
(the two have same size)
Protection against ingress of water ............ : IP20
Test case verdicts
Test case does not apply to the test object : N/A
Test item does meet the requirement ........ : P(ass)
Test item does not meet the requirement .. : F(ail)
Testing
Date of receipt of test item ......................... : November 2008
Date(s) of performance of test ................... : November 2008
General remarks
”This report is not valid as a CB Test Report unless appended by an approved CB Testing
Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02”.
Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02”.
The test result presented in this report relate only to the object(s) tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
”(see attachment #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a point is used as the decimal separator.
- Page 7 of 51 -
www.nemko.com
Report No. 116366
TRF No.:IECEN60950_1B
General product information:
The equipment under tests is a Class III computer speaker system with two mains speakers of 6.4ohm
powered by a detachable Limited Power Source adaptor with a non-specialized type connector. The
adaptor model S024Ez1800120 / JBL is supplied with 0.6A 100-240V~ 50/60Hz and output 1.2A 18VDC.
The external power supplied is approved by IEC 60950 with limited power source (Report No. 12014166
001 by TUV Rh) (refer to summary of testing). The computer speaker system is considered as IT product.
Circuit characteristics: The equipment contains secondary (SELV).
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: No connection to mains.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to
corrosive or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
The equipment under tests is a Class III computer speaker system with two mains speakers of 6.4ohm
powered by a detachable Limited Power Source adaptor with a non-specialized type connector. The
adaptor model S024Ez1800120 / JBL is supplied with 0.6A 100-240V~ 50/60Hz and output 1.2A 18VDC.
The external power supplied is approved by IEC 60950 with limited power source (Report No. 12014166
001 by TUV Rh) (refer to summary of testing). The computer speaker system is considered as IT product.
Circuit characteristics: The equipment contains secondary (SELV).
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: No connection to mains.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to
corrosive or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Click on the first or last page to see other DUET III service manuals if exist.