JBL DUET III EMC - CB Certificate ▷ View online
- Page 24 of 51 -
www.nemko.com
Report No. 116366
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
Test
voltage (V) ................................................. :
—
Current in the test circuit (mA) .......................... :
—
6.1.2.2 Exclusions .......................................................... :
N/A
6.2
Protection of equipment users from overvoltages on telecommunication networks
N/A
6.2.1 Separation
requirements
N/A
6.2.2
Electric strength test procedure
N/A
6.2.2.1 Impulse
test
N/A
6.2.2.2 Steady-state
test
N/A
6.2.2.3 Compliance
criteria
N/A
6.3
Protection of the telecommunication wiring system from overheating
N/A
Max. output current (A)....................................... :
—
Current
limiting method ...................................... :
—
7
CONNECTION TO CABLE DISTRIBUTION SYSTEMS
—
7.1
Protection of cable distribution system service
persons, and users of other equipment connected
to the system, from hazardous voltages in the
equipment
persons, and users of other equipment connected
to the system, from hazardous voltages in the
equipment
Not connected to cable
disribution systems.
disribution systems.
N/A
7.2
Protection of equipment users from overvoltages
on the cable distribution system
on the cable distribution system
N/A
7.3
Insulation between primary circuits and cable
distribution systems
distribution systems
N/A
7.3.1 General
N/A
7.3.2
Voltage surge test
N/A
7.3.3 Impulse
test
N/A
A
ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE
—
A.1
Flammability test for fire enclosures of movable equipment having a total mass
exceeding 18 kg and of stationary equipment (see 4.7.3.2)
exceeding 18 kg and of stationary equipment (see 4.7.3.2)
N/A
A.1.1 Samples.............................................................. :
—
Wall
thickness (mm) ........................................... :
—
A.1.2
Conditioning of samples; temperature (
°C) ........ :
N/A
A.1.3 Mounting
of samples .......................................... :
N/A
A.1.4 Test
flame
N/A
- Page 25 of 51 -
www.nemko.com
Report No. 116366
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
A.1.5 Test
procedure
N/A
A.1.6 Compliance
criteria
N/A
Sample 1 burning time (s) .................................. :
—
Sample 2 burning time (s) .................................. :
—
Sample 3 burning time (s) .................................. :
—
A.2
Flammability test for fire enclosures of movable equipment having a total mass not
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
N/A
A.2.1 Samples, material............................................... :
—
Wall
thickness (mm) ........................................... :
—
A.2.2
Conditioning of samples
N/A
A.2.3
Mounting of samples
N/A
A.2.4 Test
flame
N/A
A.2.5 Test
procedure
N/A
A.2.6 Compliance
criteria
N/A
Sample 1 burning time (s) .................................. :
—
Sample 2 burning time (s) .................................. :
—
Sample 3 burning time (s) .................................. :
—
A.2.7
Alternative test acc. to IEC 60695-2-2, cl. 4, 8
N/A
Sample 1 burning time (s) .................................. :
—
Sample 2 burning time (s) .................................. :
—
Sample 3 burning time (s) .................................. :
—
A.3
Hot flaming oil test (see 4.6.2)
N/A
A.3.1
Mounting of samples
N/A
A.3.2
Test procedure
N/A
A.3.3 Compliance
criterion
N/A
B
ANNEX B, MOTOR TESTS UNDER ABNORMAL CONDITIONS (see 4.7.2.2 and
5.3.2)
5.3.2)
—
B.1
General requirements
No motor.
N/A
Position
...............................................................:
—
Manufacturer ......................................................:
—
Type
....................................................................:
—
Rated
values ......................................................:
—
B.2 Test
conditions
N/A
- Page 26 of 51 -
www.nemko.com
Report No. 116366
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
B.3 Maximum
temperatures
N/A
B.4
Running overload test
N/A
B.5
Locked-rotor overload test
N/A
Test
duration (days) ............................................:
—
Electric strength test: test voltage (V) .................:
—
B.6
Running overload test for d.c. motors in
secondary circuits
secondary circuits
N/A
B.7
Locked-rotor overload test for d.c. motors in secondary circuits
N/A
B.7.1
Test procedure
N/A
B.7.2
Alternative test procedure; test time (h) ...............:
N/A
B.7.3
Electric strength test
N/A
B.8
Test for motors with capacitors
N/A
B.9
Test for three-phase motors
N/A
B.10
Test for series motors
N/A
Operating
voltage (V) .........................................:
—
C
ANNEX C, TRANSFORMERS (see 1.5.4 and 5.3.3)
—
Position
...............................................................:
No isolating transformer.
—
Manufacturer ......................................................:
—
Type
....................................................................:
—
Rated
values ......................................................:
—
Method of protection........................................... :
—
C.1 Overload
test
N/A
C.2 Insulation
N/A
Protection from displacement of windings...........:
N/A
D
ANNEX D, MEASURING INSTRUMENTS FOR TOUCH-CURRENT TESTS (see
5.1.4)
5.1.4)
—
D.1
Measuring instrument
Class III equipment.
N/A
D.2
Alternative measuring instrument
N/A
E
ANNEX E, TEMPERATURE RISE OF A WINDING (see 1.4.13)
N/A
F
ANNEX F, MEASUREMENT OF CLEARANCES AND CREEPAGE DISTANCES
(see 2.10)
(see 2.10)
N/A
- Page 27 of 51 -
www.nemko.com
Report No. 116366
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
G
ANNEX G, ALTERNATIVE METHOD FOR DETERMINING MINIMUM
CLEARANCES
CLEARANCES
N/A
G.1
Summary of the procedure for determining
minimum clearances
minimum clearances
Alternative method not used.
N/A
G.2
Determination of mains transient voltage (V) ..... :
N/A
G.2.1
AC mains supply
N/A
G.2.2
DC mains supply
N/A
G.3
Determination of telecommunication network
transient voltage (V) ........................................... :
transient voltage (V) ........................................... :
N/A
G.4
Determination of required withstand voltage (V) :
N/A
G.5
Measurement of transient voltage levels (V)...... :
N/A
G.6 Determination
of
minimum clearances............... :
N/A
H
ANNEX H, IONIZING RADIATION (see 4.3.13)
N/A
J
ANNEX J, TABLE OF ELECTROCHEMICAL POTENTIALS (see 2.6.5.6)
P
Metal
used ...........................................................:
—
K
ANNEX K, THERMAL CONTROLS (see 1.5.3 and 5.3.7)
N/A
K.1
Making and breaking capacity
No thermal control.
N/A
K.2
Thermostat reliability; operating voltage (V)........:
N/A
K.3
Thermostat endurance test; operating voltage
(V) ......................................................................:
(V) ......................................................................:
N/A
K.4
Temperature limiter endurance; operating voltage
(V) .......................................................................:
(V) .......................................................................:
N/A
K.5
Thermal cut-out reliability
N/A
K.6
Stability of operation
N/A
L
ANNEX L, NORMAL LOAD CONDITIONS FOR SOME TYPES OF ELECTRICAL
BUSINESS EQUIPMENT (see 1.2.2.1 and 4.5.1)
BUSINESS EQUIPMENT (see 1.2.2.1 and 4.5.1)
N/A
L.1
Typewriters
N/A
L.2
Adding machines and cash registers
N/A
L.3 Erasers
N/A
L.4 Pencil
sharpeners
N/A
L.5
Duplicators and copy machines
N/A
L.6 Motor-operated
files
N/A
Click on the first or last page to see other DUET III service manuals if exist.