Harman Kardon BDS 577 EMC - CB Certificate ▷ View online
Page 27 of 40
Report Ref. No.: 211-2012016-000
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Limited. - Shenzhen Branch
TRF No. IEC60065K
16
T501 pin8-9
S-C
--
Unit shutdown immediately, no damaged, no
hazard. Input current:0.046A
Duration: 10 min.
hazard. Input current:0.046A
Duration: 10 min.
17
T502 pin2-4
S-C
--
Audio output shutdown immediately, USB
output worked as normal, no damaged, no
hazard. Input current:0.170A
Duration: 10 min.
output worked as normal, no damaged, no
hazard. Input current:0.170A
Duration: 10 min.
18
T502 pin12,13-
14,15
14,15
S-C
--
Audio output shutdown immediately, USB
output worked as normal, no damaged, no
hazard. Input current:0.170A
Duration: 10 min.
output worked as normal, no damaged, no
hazard. Input current:0.170A
Duration: 10 min.
19
T502 pin12,13-
10,11
10,11
S-C
--
Audio output shutdown immediately, USB
output worked as normal, no damaged, no
hazard. Input current:0.170A
Duration: 10 min.
output worked as normal, no damaged, no
hazard. Input current:0.170A
Duration: 10 min.
20
* BD501
S-C
--
F1, BD1 were damaged, no hazard, no
breakdown. Input current:>17.4A
Duration: 10 min.
breakdown. Input current:>17.4A
Duration: 10 min.
21
* CE501
S-C
--
F1, BD1 were damaged, no hazard, no
breakdown. Input current:>17.4A
Duration: 10 min.
breakdown. Input current:>17.4A
Duration: 10 min.
22
U502 pin1-7
S-C
--
Audio output shutdown immediately, USB
output worked as normal, no damaged, no
hazard. Input current:0.312A
Duration: 10 min.
output worked as normal, no damaged, no
hazard. Input current:0.312A
Duration: 10 min.
23
* Q506 pin
G-D
G-D
S-C
--
F1, U502 were damaged, no hazard, no
breakdown. Input current: :>17.4A
Duration: 10 min.
breakdown. Input current: :>17.4A
Duration: 10 min.
24
R587
S-C
--
Unit worked as normal, no damaged, no
hazard. Input current:0.315A
Duration: 10 min.
hazard. Input current:0.315A
Duration: 10 min.
25
U501 pinV-S
S-C
--
Unit worked as normal, no damaged, no
hazard. Input current:0.315A
Duration: 30 min.
hazard. Input current:0.315A
Duration: 30 min.
26
* Q513 pinD-S
S-C
--
F1, Q514, BD1 were damaged, no hazard, no
breakdown. Input current: :>17.4A
Duration: 10 min.
breakdown. Input current: :>17.4A
Duration: 10 min.
27
CE503
S-C
--
Audio output shutdown immediately, USB
output worked as normal, no damaged, no
hazard. Input current:0.288A
Duration: 10 min.
output worked as normal, no damaged, no
hazard. Input current:0.288A
Duration: 10 min.
28
D507
S-C
--
Unit shutdown immediately, no damaged, no
hazard. Input current:0.045A
Duration: 10 min.
hazard. Input current:0.045A
Duration: 10 min.
29
D509
S-C
--
Unit shutdown immediately, no damaged, no
hazard. Input current: 0.045A
Duration: 10 min.
hazard. Input current: 0.045A
Duration: 10 min.
Page 28 of 40
Report Ref. No.: 211-2012016-000
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Limited. - Shenzhen Branch
TRF No. IEC60065K
30
D514
S-C
--
Audio output shutdown immediately, USB
output worked as normal, no damaged, no
hazard. Input current:0.170A
Duration: 10 min.
output worked as normal, no damaged, no
hazard. Input current:0.170A
Duration: 10 min.
31
Audio output
terminal
terminal
Maximum
non-
clipped
T501: 44.5,
T502: 54.5,
Enclosure:18.9
T502: 54.5,
Enclosure:18.9
Apparatus worked for 9 min, then input and
audio output bouncing, USB output normal.
No damaged, no hazard. Input current
bouncing from 1.08A to 0.045A.
Duration: 30 min.
audio output bouncing, USB output normal.
No damaged, no hazard. Input current
bouncing from 1.08A to 0.045A.
Duration: 30 min.
32
DC motor of
optical pick up
optical pick up
Blocked T501: 48.3,
T502: 41.1,
spindle motor: 13.3,
Enclosure: 17.8.
Enclosure: 17.8.
Unit could not worked as normal,
No damaged, no hazard. Input current:
0.197A.
No damaged, no hazard. Input current:
0.197A.
Duration: 130 min.
33
USB port
O-L
T501: 52.2,
T502: 45.3,
Enclosure: 21.0.
T502: 45.3,
Enclosure: 21.0.
The maximum external loaded current was
2.32A and ran for thermal equilibrium under it.
Over 2.32A, the unit shut down immediately.
No damaged, no hazard.
Duration: 146 min.
2.32A and ran for thermal equilibrium under it.
Over 2.32A, the unit shut down immediately.
No damaged, no hazard.
Duration: 146 min.
34
Opening
Blocked
T501: 52.3,
T502: 46.1,
Enclosure: 17.8.
T502: 46.1,
Enclosure: 17.8.
Unit worked as normal, no damaged, no
hazard, input current: 0.315A
hazard, input current: 0.315A
Duration: 77 min.
35
Fan
Blocked
T501: 76.0,
T502: 66.6,
Enclosure: 25.9.
T502: 66.6,
Enclosure: 25.9.
Unit worked as normal, no damaged, no
hazard, input current: 0.345A
hazard, input current: 0.345A
Duration: 160 min.
36
One Audio output
terminal
(Front left)
terminal
(Front left)
S-C
T501: 52.1,
T502: 45.5,
Enclosure: 21.9.
T502: 45.5,
Enclosure: 21.9.
Other audio output terminals were worked as
normal except the one which shorted. No
damaged, no hazard.
normal except the one which shorted. No
damaged, no hazard.
Input current: 0.541A drop to 0.325A;
Duration: 100 min.
Supplementary information:
1) S-C: short circuit, O-L: overload, O-C: open circuit;
2) The Hi-pot test conducted successfully after the completion of fault condition test;
3) *: Test repeated on all alternate Fuse sources and results were same.
4) T501, T502 winding and/or core limited: 130K, spindle motor limited: 125K, Enclosure limited: 55K.
Page 29 of 40
Report Ref. No.: 211-2012016-000
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Limited. - Shenzhen Branch
TRF No. IEC60065K
13
TABLES: clearances and creepage distances
P
Rated supply voltage: 100-240V
Pollution degree .. :
2
Material Group .... : IIIb
2 N force on internal parts applied:
Yes
P
30 N force on outside of conductive enclosure applied:
--
N/A
Location
Working Voltage
Clearance (mm)
Creepage (mm)
V rms
V peak
Min
Actual
Min
Actual
L to N
240
340
2.0
3.6
2.4
3.6
Between F501
240
340
2.0
5.8
2.4
5.8
Between pin of BD501
240
340
2.0
2.0
2.4
4.0
CY506 Primary to secondary
240
340
4.0
7.1
4.8
7.1
Live part BD501 to metal screw connected to
metal panel
metal panel
240
340
4.0
7.0
4.8
7.0
Live part heatsink HS1 to metal panel
240
340
4.0
10.0
4.8
10.0
T501 Primary to secondary under PCB trace
368
668
4.8
9.0
7.6
9.0
T501 Primary winding to secondary winding
368
668
4.8
8.0
7.6
8.0
T501 core to Primary
368
668
2.4
4.0
3.8
4.0
T501 core to secondary
368
668
2.4
4.0
3.8
4.0
T502 Primary to secondary under PCB trace
368
668
4.8
10.3
7.6
10.3
T502 Primary Winding to secondary winding
368
668
4.8
8.6
7.6
8.6
T502 core to Primary
368
668
2.4
5.5
3.8
5.5
T502 core to secondary
368
668
2.4
5.5
3.8
5.5
U505 Primary to secondary
240
361
4.0
6.5
4.8
6.5
U506 Primary to secondary
240
364
4.0
6.5
4.8
6.5
CY504 Primary to secondary
240
370
4.0
7.4
4.8
7.4
U508 Primary to secondary
240
369
4.0
6.5
4.8
6.5
PCB primary trace to metal panel
368
668
4.8
9.0
7.6
9.0
Power board primary components to main
board secondary components
board secondary components
240
340
4.0
6.5
4.8
10.0
Circuits conductively connected to the mains (use Tables 8, 9 and 11): see note below.
Notes:
1. Secondary circuits of Class II apparatus which have connector terminals that could be earthed (e.g.
antenna signal input), are subjected to the requirements for circuits conductively connected to the mains in
Tables 8 and 9.
2. Floating secondary circuits of Class I apparatus which have connector terminals that could be earthed (e.g.
antenna signal input), are subjected to the requirements for circuits conductively connected to the mains in
Tables 8 and 9 unless the floating secondary circuit is separated from the primary circuits by an earthed
metal screen (e.g. in the power transformer), or the floating secondary circuit is connected to earth via a
component such as a capacitor.
3. For insufficient clearances and creepage distances from secondary to secondary circuits and from
secondary circuits to earth, see Cl. 4.3.1, 4.3.2 and 11.2.
4. If the minimum creepage distance in Table 11 is less than the minimum required clearance in Tables 8, 9
or 10 as required, then the value for clearance is used as the minimum creepage distance.
1. Secondary circuits of Class II apparatus which have connector terminals that could be earthed (e.g.
antenna signal input), are subjected to the requirements for circuits conductively connected to the mains in
Tables 8 and 9.
2. Floating secondary circuits of Class I apparatus which have connector terminals that could be earthed (e.g.
antenna signal input), are subjected to the requirements for circuits conductively connected to the mains in
Tables 8 and 9 unless the floating secondary circuit is separated from the primary circuits by an earthed
metal screen (e.g. in the power transformer), or the floating secondary circuit is connected to earth via a
component such as a capacitor.
3. For insufficient clearances and creepage distances from secondary to secondary circuits and from
secondary circuits to earth, see Cl. 4.3.1, 4.3.2 and 11.2.
4. If the minimum creepage distance in Table 11 is less than the minimum required clearance in Tables 8, 9
or 10 as required, then the value for clearance is used as the minimum creepage distance.
"Min" = minimum required. "Actual = Actual dimensions measured.
Page 30 of 40
Report Ref. No.: 211-2012016-000
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Limited. - Shenzhen Branch
TRF No. IEC60065K
14
TABLE: list of critical components and materials
P
Object / part
No.
Manufacturer/
trademark
trademark
Type / model
Technical data
Standard
Mark(s) of
conformity1)
conformity1)
DVD Unit
DONGGUAN
YINGLIANG
ELECTRON CO.,
LTD.
YINGLIANG
ELECTRON CO.,
LTD.
BD-19
Including OPU
IEC/EN 60065 Tested in
appliance
-OPU
SANYO Electric Co.,
Ltd.
Ltd.
SF-BD415
Including Laser
Diode
Diode
IEC 60825-1,
21 CFR Part
1040.10
21 CFR Part
1040.10
JQA
-Laser Diode ROHM CO., LTD.
RLD2WM
CD: 790±6nm
DVD: 660+10/-
4nm
DVD: 660+10/-
4nm
IEC 60825-1,
21 CFR Part
1040.10
21 CFR Part
1040.10
JQA
-Laser Diode SANYO Electric Co.,
Ltd.
DL-4146
BD: 405±7nm
IEC 60825-1,
21 CFR Part
1040.10
21 CFR Part
1040.10
JQA
DC fan
JINGXIN
METAL&PLASTIC
RPODUCTS(HUIZHO
U) CO., LTD
METAL&PLASTIC
RPODUCTS(HUIZHO
U) CO., LTD
JD5020LS1
DC 12V, 0.13A,
9.48CFM
9.48CFM
UL 507
UL
Alternative
NS MICRO MOTOR
THCHNOLOGY
CORP
THCHNOLOGY
CORP
PAAD15020SL 12V, <0.16A,
15CFM
UL 507
UL
Switch
Zhejiang Bei Er Jia
Electronic Co., Ltd.
Electronic Co., Ltd.
PS8A
For UL: 125Vac,
10A (load:GP),
85°C, 6K;
For VDE: 250Vac,
8A/108A T105/55,
10E3
10A (load:GP),
85°C, 6K;
For VDE: 250Vac,
8A/108A T105/55,
10E3
EN 61058-1
UL 61058
VDE, UL
(Alternative)
Wenzhou LiYang
Electronics Co., Ltd.
Electronics Co., Ltd.
KCD1
For UL: 250Vac,
6A (load: GP),
85°C, 10K;
For VDE: 250Vac,
6A, T85/55, 10E3
6A (load: GP),
85°C, 10K;
For VDE: 250Vac,
6A, T85/55, 10E3
EN 61058-1
UL 61058
VDE, UL
(Alternative)
Zhangjiagang Huajie
Electronic Co., Ltd.
Electronic Co., Ltd.
PS8-338
For UL: 120Vac,
5A (load:TV),
50°C, 25K;
For VDE: 250Vac,
8A/128A T85/55,
10E3
5A (load:TV),
50°C, 25K;
For VDE: 250Vac,
8A/128A T85/55,
10E3
EN 61058-1
UL 61058
TUV, UL
(Alternative)
Zhejiang LECI
Electronics Co., Ltd
Electronics Co., Ltd
RS601
For UL: 250Vac,
6A (load: GP),
105°C, 6K;
6A (load: GP),
105°C, 6K;
For VDE: 250Vac,
6A, T85/55, 10E3
6A, T85/55, 10E3
EN 61058-1
UL 61058
VDE, UL
Click on the first or last page to see other BDS 577 service manuals if exist.