Harman Kardon BDS 577 EMC - CB Certificate ▷ View online
Page 65 of 69
Report Reference No.: 211-2012016-000
Attachment No. 2
IEC60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Ltd. - Shenzhen Branch
Test Report National and Group Differences for IEC 60065 7
th
Ed.+A1+A2 Rev. 02/ 2011-06
US United States of America
US
18.1
All tubes shall be mounted such that the
enclosure of the apparatus protects the tube
against the effects of implosion. Delete reference
to clause 18.2.
enclosure of the apparatus protects the tube
against the effects of implosion. Delete reference
to clause 18.2.
N/A
18.2,
18.2.1,
18.2.3
18.2.1,
18.2.3
deleted
N/A
19
Add reference to 19.2.1. The test of 19.3 is
conducted on 1) apparatus with direct view CRT
with 48 cm diagonal min., 2) apparatus, other
than a speaker, with a mass greater than 47 kg,
and 3) apparatus, other than a speaker, with a
mass or 25 kg or greater and a height of 1 m or
more. The tests in 19.1, 19.2 and 19.3 shall not
cause the apparatus to overturn. During the test
of 19.2.1, the apparatus shall not slide.
conducted on 1) apparatus with direct view CRT
with 48 cm diagonal min., 2) apparatus, other
than a speaker, with a mass greater than 47 kg,
and 3) apparatus, other than a speaker, with a
mass or 25 kg or greater and a height of 1 m or
more. The tests in 19.1, 19.2 and 19.3 shall not
cause the apparatus to overturn. During the test
of 19.2.1, the apparatus shall not slide.
N/A
19.2.1
Add: Slide test requirements.
N/A
19.3
Replace by Horizontal force stability test
requirements.
requirements.
N/A
Table 20 Add values for horizontal force test
N/A
19.6
Add: ―or equipment rack mounting‖.
N/A
20.1a
Delete
N/A
20.1b
Replace ―IEC 60707‖ with ―UL 94‖
Add: ―-parts such as protection TV lenses,
loudspeaker parts, external accessories, and
fibrous materials less then 0.25 mm thick.‖
Add: ―-parts such as protection TV lenses,
loudspeaker parts, external accessories, and
fibrous materials less then 0.25 mm thick.‖
N/A
20.1.2
Revise text to read: ―Sleeving, extruded tubing
and insulation on wiring shall be rated VW-1
under following conditions: a) wiring located in a
circuit that is considered a potential ignition
source‖ or b) wiring not located in a circuit that is
a potential ignition source but is in contact with
wiring located in a circuit that is a potential
ignition source. ‖Tape should be flame retardant.‖
Delete Note and add: ―Tape in contact with parts
of circuits that are potential ignition sources shall
be flame retardant.
and insulation on wiring shall be rated VW-1
under following conditions: a) wiring located in a
circuit that is considered a potential ignition
source‖ or b) wiring not located in a circuit that is
a potential ignition source but is in contact with
wiring located in a circuit that is a potential
ignition source. ‖Tape should be flame retardant.‖
Delete Note and add: ―Tape in contact with parts
of circuits that are potential ignition sources shall
be flame retardant.
P
Page 66 of 69
Report Reference No.: 211-2012016-000
Attachment No. 2
IEC60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Ltd. - Shenzhen Branch
Test Report National and Group Differences for IEC 60065 7
th
Ed.+A1+A2 Rev. 02/ 2011-06
US United States of America
US
20.1.3
Replace 1st paragraph with: ―Base material of
printed wiring boards, on which the available
power as the connection exceeds 15 W or the
operating voltage exceeds 50 V a.c. or d.c under
normal operating conditions, shall be of
flammability category V-1 or better according to
UL 94.‖
In 2nd paragraph replace ―IEC 60707‖ with ―UL
94‖ and remove exception for printed boards
housed in metal enclosures.
printed wiring boards, on which the available
power as the connection exceeds 15 W or the
operating voltage exceeds 50 V a.c. or d.c under
normal operating conditions, shall be of
flammability category V-1 or better according to
UL 94.‖
In 2nd paragraph replace ―IEC 60707‖ with ―UL
94‖ and remove exception for printed boards
housed in metal enclosures.
In 3rd paragraph replace ―IEC 60707‖ with ―UL
94‖ and delete option to use Clause G.1 of Annex
G.
94‖ and delete option to use Clause G.1 of Annex
G.
P
20.1.4
Replace with: ―Components and parts shall
comply with the relevant flammability category
according to UL 94 as specified in Table 21.
Delete all other text.
comply with the relevant flammability category
according to UL 94 as specified in Table 21.
Delete all other text.
Add: ―Component power supplies complying with
the construction and test requirements of UL
1310, UL 1950 Third Edition, or UL 60950 are
considered to fulfill the test requirements on the
clause.‖
the construction and test requirements of UL
1310, UL 1950 Third Edition, or UL 60950 are
considered to fulfill the test requirements on the
clause.‖
Table 21 - Replace complete table with new table
for ―Flammability categories for components and
parts.‖
for ―Flammability categories for components and
parts.‖
P
20.2.1
Modification: 1st paragraph: ―Fire enclosure
required for 1) circuits and components where the
available power exceeds 15 W, 2) inductors and
windings conductively connected to the mains
and 3) high-voltage products. The fire enclosure
shall comply with the flammability requirements of
Table 22 according to UL 94 and 746C. 2nd, 3rd,
and 4th paragraphs are deleted.
required for 1) circuits and components where the
available power exceeds 15 W, 2) inductors and
windings conductively connected to the mains
and 3) high-voltage products. The fire enclosure
shall comply with the flammability requirements of
Table 22 according to UL 94 and 746C. 2nd, 3rd,
and 4th paragraphs are deleted.
In 5th paragraph replace ―IEC 60707 or clause
G.1 of Annex G‖ with ―UL 94 or UL 746C.‖
G.1 of Annex G‖ with ―UL 94 or UL 746C.‖
Table 22
– Add‖ Flammability categories for fire
enclosures.
P
20.2.2
Revise text to read: ―Internal fire enclosures shall
not have openings that permit accessibility to
components, wiring, connections, or printed
wiring board conductive patterns where the
available power exceeds 15 W and to inductors
and windings conductively connected to the
mains and shall comply with the material
requirements in Table 22. Compliance is checked
by inspection and measurement and using the
jointed test finger.‖
not have openings that permit accessibility to
components, wiring, connections, or printed
wiring board conductive patterns where the
available power exceeds 15 W and to inductors
and windings conductively connected to the
mains and shall comply with the material
requirements in Table 22. Compliance is checked
by inspection and measurement and using the
jointed test finger.‖
N/A
20.2.3
Modification: Outer enclosures shall have a
minimum flammability rating of HB, per UL 94,
when an internal fire enclosure is provided.
minimum flammability rating of HB, per UL 94,
when an internal fire enclosure is provided.
N/A
Page 67 of 69
Report Reference No.: 211-2012016-000
Attachment No. 2
IEC60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Ltd. - Shenzhen Branch
Test Report National and Group Differences for IEC 60065 7
th
Ed.+A1+A2 Rev. 02/ 2011-06
US United States of America
US
Figures
Modifications to Figures:
Fig 14 - Illustrates the articulated finger probe.
Fig 15 - Illustrates the shock hazard marking and
associated graphical symbols.
associated graphical symbols.
Fig 16 - Illustrates the shock hazard graphical
symbol.
symbol.
Fig 17 - Illustrates portable cart marking.
Fig 18 - High voltage spacings graph.
Fig 19 - Class 105 insulation aging temperature
graph.
graph.
Fig 20 - Flowchart for horizontal force test.
P
Annex A
Modification: Apparatus intended for outdoor use
or wet locations has any of the following
attributes: a) provided with a means to make it
transportable, b) has a mass less than 35 kg, c)
can be battery operated, d) associated literature
states or implies such use
or wet locations has any of the following
attributes: a) provided with a means to make it
transportable, b) has a mass less than 35 kg, c)
can be battery operated, d) associated literature
states or implies such use
N/A
Add: Apparatus in a), b), or c) above is not
considered for outdoor use or in wet locations if
marked as specified in 5.4.
considered for outdoor use or in wet locations if
marked as specified in 5.4.
N/A
A.5,
A.5.1,
A.5.4.1
A.5.1,
A.5.4.1
deleted.
N/A
A.9.1.1
Add: Touch current test shall be conducted after
the water spray test described in A.11.1.1 and the
touch current shall not be more than 0.5 MIU
when the open-circuit potential between any
accessible part and earth or any other accessible
part is more than 21.2 V peak.
the water spray test described in A.11.1.1 and the
touch current shall not be more than 0.5 MIU
when the open-circuit potential between any
accessible part and earth or any other accessible
part is more than 21.2 V peak.
N/A
A.10,
A10.2,
A.10.2.1,
A.10.2.2
A10.2,
A.10.2.1,
A.10.2.2
Deleted
N/A
A.11.1.1
Add: Apparatus shall be subjected to the water
spray test according to UL 1571.
spray test according to UL 1571.
N/A
A.16.1
Add: Flexible cords shall be suitable for outdoor
use.
use.
N/A
A.20.2.1
Add: Enclosures for an apparatus intended for
permanent outdoor location shall comply with
requirements for Type 3 enclosures in UL 50.
permanent outdoor location shall comply with
requirements for Type 3 enclosures in UL 50.
N/A
Annex B
5th paragraph - add reference to clause 4.2.1.1 in
IEC 62151.
IEC 62151.
Add to 12th paragraph: ―The requirements of
4.2.1.1 shall be replaced by the requirements or
2.3.1 of UL 60950, Third Edition.‖
4.2.1.1 shall be replaced by the requirements or
2.3.1 of UL 60950, Third Edition.‖
N/A
Page 68 of 69
Report Reference No.: 211-2012016-000
Attachment No. 2
IEC60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Ltd. - Shenzhen Branch
Test Report National and Group Differences for IEC 60065 7
th
Ed.+A1+A2 Rev. 02/ 2011-06
US United States of America
US
13th paragraph, 2nd dash replace with: ―In the
event of a single insulation fault, the voltages on
the TNV-0 circuits, TNV-1 circuits and accessible
conductive parts shall not exceed the values
given in clause 9.1.1.1a of this standard for more
than 0.2 s. Moreover, the limits values as given in
11.1 shall not be exceeded. After 0.2 s the
voltage limits of 4.1.2 (35 V peak, or 60 V d.c.)
shall apply.‖
event of a single insulation fault, the voltages on
the TNV-0 circuits, TNV-1 circuits and accessible
conductive parts shall not exceed the values
given in clause 9.1.1.1a of this standard for more
than 0.2 s. Moreover, the limits values as given in
11.1 shall not be exceeded. After 0.2 s the
voltage limits of 4.1.2 (35 V peak, or 60 V d.c.)
shall apply.‖
N/A
Add to 19th paragraph: ―Apparatus intended to be
connected to telecommunication networks and
having ringing voltages applied to the apparatus
is subjected to touch current limits in accordance
with clause 5.1.8.1.1 of UL 60950, Third Edition‖
connected to telecommunication networks and
having ringing voltages applied to the apparatus
is subjected to touch current limits in accordance
with clause 5.1.8.1.1 of UL 60950, Third Edition‖
N/A
Add to 21st paragraph: ―Telecommunication
network that uses outside cable shall comply with
the requirements for protection against
overvoltage from power line crosses per 6.4 of
UL 60950, Third Edition‖
network that uses outside cable shall comply with
the requirements for protection against
overvoltage from power line crosses per 6.4 of
UL 60950, Third Edition‖
N/A
Add to 22nd paragraph: ―Acoustic tests per 6.5 of
UL 60950, Third Edition for apparatus containing
earphone held against the ear.‖
UL 60950, Third Edition for apparatus containing
earphone held against the ear.‖
N/A
Add to 24th par
agraph: ―Apparatus shall be
provided with appropriate markings and
instructions as described in Annex NAA of UL
60950, Third Edition.‖
instructions as described in Annex NAA of UL
60950, Third Edition.‖
N/A
Annex D Figure D.1 & Note delete reference to IEC 60990
and add reference to ANSI C101. Add touch
current value in MIU where MIU = U2 x 2 (r.m.s.
value)
current value in MIU where MIU = U2 x 2 (r.m.s.
value)
P
Annex G Deleted
N/A
Annex Q Add: Safety requirements for video apparatus for
use in health care facilities
N/A
Annex R Add: Safety requirements for undercabinet
apparatus
N/A
Annex S
Add: Safety requirements for in-wall mounted
apparatus
apparatus
N/A
Annex T
Add: Safety requirements for apparatus with
projection lamps
projection lamps
N/A
Annex U Add: Safety requirements for permanently
connected apparatus
N/A
Annex V
Add: Safety requirements for carts, stands, and
similar apparatus for use with specific apparatus
covered by this standard
similar apparatus for use with specific apparatus
covered by this standard
N/A
Annex W Add: Construction details for a 0.02-ohm shunt
for use in the peak inrush-current measurement
described in 14.6.11.1
described in 14.6.11.1
N/A
