Harman Kardon AVR 300 (serv.man10) User Manual / Operation Manual ▷ View online
33 PROGRAMMING THE REMOTE
Programming the Remote
DVD as input. Press the TV Device Control
Selector
Selector
$ to select the TV mode, and
then press the Mute button
, to select TV
Power. Finally, press the CBL Device Control
Selector
Selector
$ followed by the Mute button
to select Cable Power. Press the
Channel Up button f to enter the
commands.
Channel Up button f to enter the
commands.
5. To recall any of both macros available at first
press eigther the AVR
1 or CBL/SAT $
Device Selector, depending on which macro
should be sent, then press the Power button
3.
should be sent, then press the Power button
3.
IMPORTANT NOTES:
• If a macro was set up with the AVR Device
• If a macro was set up with the AVR Device
Selector
1 (macro 1) the Power button
3 cannot be used anymore for turning the
AVR off only. Pressing the Power button
AVR off only. Pressing the Power button
3
after AVR
1 was selected as device will
always play the macro programmed. The
corresponding is with the power on/off
function of the cable/sat receiver if a macro
was set up with the CBL/SAT Device
Selector
corresponding is with the power on/off
function of the cable/sat receiver if a macro
was set up with the CBL/SAT Device
Selector
$ (macro 2).
• When a macro shall turn on the AVR 300 RDS,
it should be programmed on the CBL/SAT
Device Selector
Device Selector
$ (macro 2) only. Macro 1
should be selected only if the AVR is turned on
already, otherwise pressing the AVR Device
Selector
already, otherwise pressing the AVR Device
Selector
1 would turn on the AVR
immediately rather than selecting the macro
associated with the AVR Selector
associated with the AVR Selector
1
(macro 1)
To remove a macro program, follow steps 1, 2
and 4 above, but ignore step three. For example,
to erase macro 1, press the AVR Device
Selector
and 4 above, but ignore step three. For example,
to erase macro 1, press the AVR Device
Selector
1 and the Mute button at the
same time until the red light under the Device
Control Selector turns on. Press the Power
button
Control Selector turns on. Press the Power
button
3 and then press the Channel Up
button f. The red light under the Device
Control Selector
Control Selector
1 will blink twice to confirm
the data entry and then turn off.
Volume Punch-Through
The AVR 300 RDS’s remote may be programmed
to operate the Volume Control
The AVR 300 RDS’s remote may be programmed
to operate the Volume Control
! and the
Mute
from either the TV or the AVR in
conjunction with any of the six devices controlled
by the remote. For example, since the AVR 300
RDS will likely be used as the sound system for
TV viewing, you may wish to have the AVR’s
volume activated although the remote is set to
run the TV.
by the remote. For example, since the AVR 300
RDS will likely be used as the sound system for
TV viewing, you may wish to have the AVR’s
volume activated although the remote is set to
run the TV.
To program the remote for Volume Punch-
Through, follow these steps:
Through, follow these steps:
1. Press the Input or Video Device Selector
c
$ for the unit you wish to have
associated with the volume control and the
Mute button
Mute button
at the same time until the
red light illuminates under the Device
Selector.
Selector.
2. Press the Volume Up button
!.
3. Press either the AVR
1 or the TV Device
Control Selector
$, depending on which
system’s volume control you wish to have
attached for the punch-through mode. Note
that the red light under the Device Control
Selector
attached for the punch-through mode. Note
that the red light under the Device Control
Selector
$ will blink twice and then go out
to confirm the data entry.
Example: To have the AVR’s volume control
activated even though the remote is set to
control the TV, first press the TV Device
Control Selector
activated even though the remote is set to
control the TV, first press the TV Device
Control Selector
$ and the Mute button
at the same time. Next, press the Volume
Up button
Up button
!, followed by the AVR Device
Control Selector
1.
NOTE: Should you wish to return the remote to
the original configuration after entering a Vol-
ume Punch-Through, you will need to repeat the
steps shown above. However, press the same
Device Control Selector in steps one and three.
the original configuration after entering a Vol-
ume Punch-Through, you will need to repeat the
steps shown above. However, press the same
Device Control Selector in steps one and three.
Reassigning Device-Control Selectors
Although any of the Input or Video Device
Selectors
Although any of the Input or Video Device
Selectors
2$ is normally assigned to the
category of product shown on the remote, it is
possible to reassign one of these buttons to
operate a second device of another type. For
example, if you have two VCRs but no cable box
receiver, you may program the CBL button
possible to reassign one of these buttons to
operate a second device of another type. For
example, if you have two VCRs but no cable box
receiver, you may program the CBL button
$ to
operate a second VCR. Before following the
normal programming steps for either Three-Digit
entry or Auto Search code entry, you must first
reassign the button with the following steps:
normal programming steps for either Three-Digit
entry or Auto Search code entry, you must first
reassign the button with the following steps:
1. Press the Input or Video Device Selector
2$ you wish to reassign and the Mute
button
button
at the same time until the red light
illuminates under the Device Control
Selector
Selector
$.
2. Press the Input or Video Device Selector
2$ for the function you wish to program
into the reassigned button.
into the reassigned button.
3. Enter the three-digit code for the specific
model you wish the reassigned button to
operate.
operate.
4. Press the same Input or Video Device
Selector
2$ pressed in Step 1 once
again to store the selection.
Example: To use the CBL button to operate a
second VCR, first press the CBL Device
Control Selector
second VCR, first press the CBL Device
Control Selector
$ and the Mute button
at the same time until the red light glows
under the CBL button. Press the VCR button
$, followed by the three-digit code for the
specific model you wish to control. Finally,
press the CBL button
under the CBL button. Press the VCR button
$, followed by the three-digit code for the
specific model you wish to control. Finally,
press the CBL button
$ again.
34 FUNCTION LIST
Function List
No.
Button
CD
DVD
TV
VCR
CBL/SAT
1
AVR Selector
2
TV Selector
Power On
3
CD Selector
Power On
4
DVD Selector
Power On
5
CBL/SAT Selector
Power On
6
VCR Selector
Power On
7
Power
Power Off
Power Off
Power On/Off
Power On/Off
Power On/Off
8
Test
9
TV/VCR
TV/VCR Select
TV/VCR Select
Fav
10
Channel Up
Skip Fwd
Channel +
Channel +
Channel +
11
Sleep
12
Volume Up
Volume Up
Volume Up
Volume Up
13
Surround Select
Skip Rev
Channel –
Channel –
Channel –
14
Mute
Mute
Mute
15
Volume Down
Volume Down
Volume Down
16
Channel
Title
Guide
Guide
Guide
17
Speaker
Intro Scan
Menu
Menu
Menu
Menu
18
⁄
⁄
Up
Up
Up
Up
19
fi
fi
Left
Left
Left
Left
20
Set
Enter
Select
Select
Select
21
fl
fl
Right
Right
Right
Right
22
Digital Select/Exit
Subtitle
Exit
Exit
Exit
23
¤
¤
Down
Down
Down
Down
24
Delay/Prev. Channel
Open/Close
Return
Prev. Channel
Prev. Channel
25
Vid 1 Select
Alt
Music/Alt
26
6 Ch Select
27
Night
Pause
Pause
Rec./Pause
28
Multi Room
Stop
Stop
Stop
29
Vid 2 Select
Open/Close
30
AM/FM
31
Transport Reverse
32
Transport forward
Play
Play
Play
33
Vid 3 Select
Disk Skip
Disk Skip
34
Tuner Mode
35
Tuning Down fi
fifi
fi
Rev Search
Rev Search
Rewind
Day –
36
Tuning Up fl
flfl
fl
Fwd Search
Fwd Search
Fast forward
Day +
37
Tape Selector
38
Memory
39
Preset ‡
‡fi
fi
Rev Skip
Rev Slow
Rev Slow
Page –
40
Preset fl
fl·
·
Fwd Skip
Fwd Slow
Fwd Slow
Page +
41
1
1
1
1
1
1
42
2
2
2
2
2
2
43
3
3
3
3
3
3
44
4
4
4
4
4
4
45
5
5
5
5
5
5
46
6
6
6
6
6
6
47
7
7
7
7
7
7
48
8
8
8
8
8
8
49
9
9
9
9
9
9
50
0
0
0
0
0
0
51
OSD/Info
Info
52
RDS/Enter
Enter
Enter
53
M 1
Time
Audio
54
M 2
Repeat
Angle
PPV
55
Direct/M 3
Random Play
56
Clear/M 4
+10
Clear
Bypass/Next
21
25
29
30
26
22
1
5
6
7
8
9
10
11
2
3
4
12
33
31
27
23
34
32
28
24
35
36
37
38
39
40
41
42
43
44
45
46
50
51
52
53
54
55
56
47
48
49
14
18
20
13
19
15
16
17
AVR 300 RDS
35 SETUP CODE
Setup Code Tables: CD Players
Setup Code Tables: DVD Players
Manufacturer/Brand
Setup Code Number
ADCOM
062
AIWA
089
170
187
AKAI
202
CARVER
167
041
135
138
139
050
203
DENON
205
226
HARMAN KARDON
047
033
208
001
002
JVC
022
136
163
KENWOOD
007
016
023
055
137
MARANTZ
107
044
MONDIAL
147
NAD
005
178
215
NAKAMICHI
218
ONKYO
030
038
062
168
169
OPTIMUS
049
085
PANASONIC
068
PIONEER
010
020
174
PHILIPS
041
REALISTIC
102
181
187
RCA
012
150
SHARP
051
173
SHERWOOD
096
166
SONY
097
126
133
225
TEAC
079
140
TECHNICS
068
172
YAMAHA
012
046
183
186
Manufacturer/Brand
Setup Code Number
DENON
014
HARMAN KARDON
018
JVC
012
LG
010
MAGNAVOX
013
MITSUBISHI
002
ONKYO
017
PANASONIC
003
PHILIPS
013
PIONEER
004
PROSCAN
005
006
RCA
005
006
SAMSUNG
011
015
SONY
007
TOSHIBA
008
YAMAHA
009
ZENITH
010
016
Setup Code Tables: LD Players
Manufacturer/Brand
Setup Code Number
DAeWOO
024
DENON
030
GOLDSTAR
027
KENWOOD
025
MAGNAVOX
026
OPTIMUS
032
PANASONIC
021
PHILIPS
026
PIONEER
020
034
RCA
031
REALISTIC
032
SAMSUNG
023
029
SHARP
025
028
SONY
022
TECHNICS
021
TOSHIBA
025
YAMAHA
033
Setup Code Tables: CABLE receivers
Manufacturer/Brand
Setup Code Number
Remote Control Model
PIONEER
001
BR-200
AMERICAST
005
JERROLD
006
RT-J22 (CFT2200)
JERROLD
007
RT-J550C
PIONEER
002
BR-95
PIONEER
003
RT-P81/82
SCIENTIFIC-ATLANTIC
004
RT-S6X/USV86
TOCOM
010
RT-T7/T8
ZENITH
008
MN2500
ZENITH
009
RT-ZPMV
36 SETUP CODES
Setup Code Tables: SAT
Manufacturer / Brand
Set-Up Code Number
ALBA
018 029 036 065 111 126
ALCATEL
013 014
ALDES
099 101 162 165
ALLSONIC
099
AMSTRAD
026 052 127 159
ANKARO
099 106
ARCON
020 136
ARISTONA
108
ARTHUR MARTIN
157
ASTON
144
ASTRA
124 160
BARCOM
106
BLAUPUNKT
083
BRUNS
099
BUSH
018 029 108 111 126
CABLETIME
002 007 038
CAMBRIDGE
030 116
CELLULARVISION
139
CH. MASTER
036
CHAPARRAL
053
CITY COM
042
CONDOR
021
CONNEXION CX
025
CONNEXIONS
084 089 158
DDC
036
DISK EXPRESS
029 084 106
DRAKE
071 085 091 092 095 117 135
DYNASAT
042
ECHOSTAR
017 057 062 097 105 121 122 128 148
ELTASAT
096
EMME ESSE
021 042 099 100
FAIT
042
FERGUSON
093 102 107 108 119 120 123
FINLUX
050 051 086
FRACARRO
042 043 110 149
FTE
020 044 140
FUBA
021 022 028 055
GALAXIS
099
GENERAL INSTRUMENT
175
GIUCAR RECORD
048 151
GOLDEN CABLE
019
GOLDSTAR
034 136
GRAETZ
150 161
GROTHUSEN
034
GRUNDIG
079 083 108 113 123 152
HINARI
036
HIRSCHMANN
032 050 079
HITACHI
086
HUTH
035 099
IMPERIAL
018 029
INGELEN
150 161
ITT
125
ITT-NOKIA
062 123 150 161
JEEMON
115
JERROLD
004 005 093
JOHANSSON
156
Manufacturer / Brand
Set-Up Code Number
KATHREIN
042 140 141 153 158
KOSMOS
034
KRIESLER
108
LA SAT
021
LENCO
034 136
LUXOR
024 090 150 157 161
MACAB
163
MAGAI
140
MARANTZ
076
MASPRO
103 108 155 158
MATAV
019
MATSUSHITA
003
METZ
152
MINERVA
152
MORGANS
056 139
MULTISTAR
140
MURATO
034
NEC
072 081 087 129
NEIRU
136
NOKIA
150 161
NORSAT
094
OLYMPIC
099
OPTEX
041
ORBIT
037
ORIGO
018
PACE
008 015 104 108 120 123 134
PALCOM
027 028 154
PALSAT
066
PALTEC
028
PANASONIC
073
PHILIPS
032 060 075 076 178
PHOENIX
015
PHONOLA
108
PLANET
018
PROSAT
036 111
PTT TELCOM
026
PYE
108
QUADRAL
036
QUELLE
152
RADIOLA
108
RADIX
097
RAMIT
144
REDIFFUSION
081 094
RFT
039
SABA
029 098 145
SAISHO
074
SAKURA
015 109 112
SALORA
077 080 124 150 157
SAMSUNG
032 140
SAT
040
SAT PARTNER
034
SATCOM
026 035
SATECO
058
SATMASTER
035
SATPORTNER
136
SCHAUB LORENZ
150 161
Click on the first or last page to see other AVR 300 (serv.man10) service manuals if exist.