Sony KP-43T90 / KP-48V90 / KP-53S76 / KP-53V90 / KP-61V90 Service Manual ▷ View online
9
Sony KP-43T90/48V90/53S76/53V90/61V90 (US) 4-082-881-13 (1)
C
• VHF
and
• UHF
Cable or antenna
This is the simplest connection. Connection is
made directly from the cable or antenna to
the projection TV.
made directly from the cable or antenna to
the projection TV.
Cable and antenna
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
Antenna cable
VHF/UHF
Select Cable or ANT mode by pressing ANT
on the remote control.
on the remote control.
Connecting a cable box
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
Also, set “Cable” to “On” in the Channel Set
Up menu (page 31).
encoded signals that require a cable box* to
view all channels.
Also, set “Cable” to “On” in the Channel Set
Up menu (page 31).
(Rear of projection TV)
VHF/UHF
Coaxial cable
(Rear of projection TV)
AUX
Coaxial cable
(No connection “TO
CONVERTER” in this case)
CONVERTER” in this case)
TO CONVERTER
Cable box and cable
Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)
For this set up, you can switch between
scrambled channels (through your cable
box), and normal (CATV) channels by
pressing ANT on your remote control.
Notes:
• You may be able to program your Sony
scrambled channels (through your cable
box), and normal (CATV) channels by
pressing ANT on your remote control.
Notes:
• You may be able to program your Sony
remote control to operate your cable box.
(see “Operating a Cable Box or Satellite
Receiver (SAT)” on page 49)
(see “Operating a Cable Box or Satellite
Receiver (SAT)” on page 49)
• During PIP or Favorite Channel viewing,
the AUX input can only be viewed in the
main picture.
main picture.
• AUX input cannot be viewed in the PIP
window.
*Cable box
Coaxial cable
OUT
IN
(Rear of projection TV)
VHF/UHF
*Cable box
VHF/UHF
(Rear of projection TV)
AUX
CATV cable
(unscrambled channels)
Scrambled
channels
channels
TO CONVERTER
(Signal)
75-ohm coaxial cable
(not supplied)
(not supplied)
75-ohm coaxial cable
EAC-66 U/V mixer
(not supplied)
(not supplied)
300-ohm twin lead cable
(Rear of
projection TV)
VHF/UHF
01GB05BAS-E.P65
3/9/02, 3:38 PM
9
10
Sony KP-43T90/48V90/53S76/53V90/61V90 (US) 4-082-881-13 (1)
Installing and Connecting the Projection TV (continued)
S VIDEO
VIDEO
AUDIO
L
R
VHF/UHF
AUX
(MONO)
IN
VIDEO 1
VIDEO 4
VIDEO 3
OUT
AUDIO
(VAR/FIX)
TO
CONVERTER
Y
P
B
P
R
R
L
(MONO)
AUDIO
COMPONENT
LINE
OUT
OUT
IN
AUDIO R AUDIO L VIDEO
S VIDEO
VHF/UHF
LINE
IN
OUT
IN
S VIDEO
VIDEO
AUDIO
L
R
VHF/UHF
AUX
(MONO)
IN
VIDEO 1
VIDEO 4
VIDEO 3
OUT
AUDIO
(VAR/FIX)
TO
CONVERTER
Y
P
B
P
R
R
L
(MONO)
AUDIO
COMPONENT
LINE
OUT
OUT
IN
AUDIO R AUDIO L VIDEO
S VIDEO
VHF/UHF
LINE
IN
Connecting a cable TV system/
antenna to a VCR
antenna to a VCR
1
Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/UHF IN on the VCR.
incoming cable connection or antenna to
VHF/UHF IN on the VCR.
2
Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.
OUT on the VCR to VHF/UHF on the
projection TV.
3
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
Connecting a VCR and projection
TV to a cable box
TV to a cable box
1
Connect the single (input) jack of the
splitter to the incoming cable connection,
and connect the other two (output) jacks
(using the coaxial cable) to IN on the cable
box and VHF/UHF on the projection TV.
splitter to the incoming cable connection,
and connect the other two (output) jacks
(using the coaxial cable) to IN on the cable
box and VHF/UHF on the projection TV.
2
Using a coaxial cable, connect OUT on the
cable box to VHF/UHF IN on the VCR.
cable box to VHF/UHF IN on the VCR.
3
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
Disconnect all power sources before making any connections.
(Rear of projection TV)
VMC-810S/820S
(not supplied)
(not supplied)
YC-15V/30V
(not supplied)
2
1
Cable/
Antenna
Antenna
Coaxial cable
AUDIO-L
AUDIO-R
VIDEO
S VIDEO
VMC-810S/820S
(not supplied)
(not supplied)
YC-15V/30V
(not supplied)
AUDIO-L
AUDIO-R
VIDEO
S VIDEO
Cable/
Antenna
Antenna
Splitter (not supplied)
Cable box
1
Coaxial cable
2
VCR
VCR
3
(Rear of projection TV)
3
01GB05BAS-E.P65
3/9/02, 3:38 PM
10
11
Sony KP-43T90/48V90/53S76/53V90/61V90 (US) 4-082-881-13 (1)
Note:
• To view scrambled channels through the
• To view scrambled channels through the
cable box, select the video input which the
cable box is connected to by pressing TV/
VIDEO.
cable box is connected to by pressing TV/
VIDEO.
* If your VCR is not equipped with S VIDEO, use
a VIDEO cable (yellow) instead of the S VIDEO
cable.
cable.
** If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
input on the projection TV.
01GB05BAS-E.P65
3/9/02, 3:38 PM
11
12
Sony KP-43T90/48V90/53S76/53V90/61V90 (US) 4-082-881-13 (1)
Installing and Connecting the Projection TV (continued)
S VIDEO
VIDEO
AUDIO
L
R
VHF/UHF
AUX
(MONO)
IN
VIDEO 1
VIDEO 4
VIDEO 3
OUT
AUDIO
(VAR/FIX)
TO
CONVERTER
Y
P
B
P
R
R
L
(MONO)
AUDIO
COMPONENT
VHF/UHF
S VIDEO
OUT
IN
LINE OUT
SATELLITE IN
AUDIO R AUDIO L VIDEO
Disconnect all power sources before making any connections.
S VIDEO
AUDIO-L
AUDIO-R
(Rear of projection TV)
1
2
RK-74A (not supplied)
3
Satellite antenna
cable
cable
YC-15V/30V (not supplied)
Connecting a satellite receiver
(SAT)
(SAT)
1
Connect the cable from the satellite
antenna to the satellite receiver.
antenna to the satellite receiver.
2
Attach the coaxial cable from the incoming
cable connection or antenna to VHF/UHF
on the projection TV.
cable connection or antenna to VHF/UHF
on the projection TV.
3
Using AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the projection TV (White-AUDIO
Left, Red-AUDIO Right).
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the projection TV (White-AUDIO
Left, Red-AUDIO Right).
Note:
• To view input from the satellite receiver,
• To view input from the satellite receiver,
select the video input which the satellite
receiver is connected to by pressing TV/
VIDEO on the remote control.
receiver is connected to by pressing TV/
VIDEO on the remote control.
Cable/
Antenna
Antenna
SAT
01GB05BAS-E.P65
3/9/02, 3:38 PM
12
Click on the first or last page to see other KP-43T90 / KP-48V90 / KP-53S76 / KP-53V90 / KP-61V90 service manuals if exist.