Sony KDL-32XBR4 / KDL-40D3000 Service Manual ▷ View online
45
KDL-32XBR4/40D3000
KDL-32XBR4/40D3000
KDL-40D3000 ONLY
H3 BOARD HARNESS
1. Apply Sheet Core C to edge of Panel to
cover sharp edge of panel.
Use rib on bezel (w/o screw boss) as a
guide for mid-point of tape.
Use rib on bezel (w/o screw boss) as a
guide for mid-point of tape.
2. Install H4-Bd. Use caution to align plastic
clip at bottom of bezel with notch in PWB.
3. Use x1 3x12mm screw to fix H3-Bd to Bezel.
TORQUE SPECIFICATION
Torque: 0.9
㧔N.m㧕
OPERATION PROCESS
Use rib on bezel as mid-point reference for Sheet Core C
Use panel edge to align Himelon Tape.
Use split in harness(H4 wires) and UL tape as reference for Harness positioning.
2
1
3
46
KDL-32XBR4/40D3000
KDL-32XBR4/40D3000
KDL-40D3000 ONLY
H3 BOARD HARNESS (CONTINUED)
1. Apply Sheet Core C as Shown on H3-Bd
Harness
2. Wire Dress AC INLET As shown.
MAKE SURE TO install EARTH GROUND
SCREW on Green/Yellow Earth Wire.
SCREW on Green/Yellow Earth Wire.
OPERATION PROCESS
Sheet Core C
Earth Ground
Wire w/Screw
Wire w/Screw
Dress AC Inlet Cables
In G3 Bracket clamps.
In G3 Bracket clamps.
1
2
47
KDL-32XBR4/40D3000
KDL-32XBR4/40D3000
KDL-40D3000 ONLY
H4 BOARD
1. LED Guide and Screw is pre-assembled
by Vendor.
2. Install H4-Bd. Be careful to align Plastic
clip at bottom of bezel with notch in PWB.
3. Use x1 3x12mm screw to fix H3-Bd to Bezel.
4. Attach 3P Harness to H4.
Tape H4 wires to Bottom of panel edge.
TORQUE SPECIFICATION
Torque: 0.9
㧔N.m㧕
OPERATION PROCESS
1
4
3
2
48
KDL-32XBR4/40D3000
KDL-32XBR4/40D3000
KDL-40D3000 ONLY
H4 BOARD AND RIGHT SPEAKER
OPERATION PROCESS
Wire Dress Right Speaker wires and H4
cables in side clamps (white) and G3-Bd
bracket clips (black).
cables in side clamps (white) and G3-Bd
bracket clips (black).
1
2
1
2
2nd UL Tape indicates SPLIT
for H3-Bd / H4-Bd cables.
NOTE: H4 cables are ABOVE
Himelon tape.
for H3-Bd / H4-Bd cables.
NOTE: H4 cables are ABOVE
Himelon tape.
Click on the first or last page to see other KDL-32XBR4 / KDL-40D3000 service manuals if exist.