Sony KDL-32XBR4 / KDL-40D3000 Service Manual ▷ View online
53
KDL-32XBR4/40D3000
KDL-32XBR4/40D3000
KDL-40D3000 ONLY
INVERTER BOARD AND D1 BOARD
1.
CAUTION
MAKE SURE BLACK INSULATION
TUBING DOES NOT TOUCH CONN
TUBING DOES NOT TOUCH CONN
BEFORE
INSTALLING 2P MD CONN.
AFTER
INSTALLING CONNECTOR, TUBE
INSULATION CAN TOUCH CONNECTOR!
OPERATION PROCESS
N.G.
INVERTER
O.K.
1
G3-
Bd
INSTALL INVERTER SIDE 1ST
INVERTER
1
1
O.K.
N.G.
D1-Bd
D1-Bd
INSTALL D1-Bd SIDE 2ND
1
54
KDL-32XBR4/40D3000
KDL-32XBR4/40D3000
KDL-40D3000 ONLY
INVERTER BOARD AND D1 BOARD (CONTINUED)
1.
CAUTION:
MAKE SURE WHITE/PINK WIRES
DO NOT CROSS
DO NOT CROSS
CHECK INVERTER SIDE WIRES
CHECK D1-Bd SIDE WIRES
CHECK D1-Bd SIDE WIRES
OPERATION PROCESS
1
CAUTION:
Make Sure
Inverter Connector DOES NOT
CROSS WHITE/PINK WIRES!
CROSS WHITE/PINK WIRES!
INVERTE
R
CHECK BOTH SIDES OF HARNESS!
(INVERTER CONN / D1-Bd CONN)
(INVERTER CONN / D1-Bd CONN)
55
KDL-32XBR4/40D3000
KDL-32XBR4/40D3000
KDL-40D3000 ONLY
G3 BOARD AND D1 BOARD
Install/Wire Dress Harnesses as shown.
CAUTION: Make sure INVERTER CONN.
is Fully LOCKED!!
OPERATION PROCESS
1
2
G3-
Bd
CAUTION:
Make Sure
Inverter Connector is Fully LOCKED!
Use Marking JIG to confirm Connector
is Fully Locked.
Use Marking JIG to confirm Connector
is Fully Locked.
D1-
Bd
3
4
NOTE: Ferrite Core and Sheet Core A
Applied by SBC Plants.
Applied by SBC Plants.
UPDATE:
4/13/2007: FERRITE/Sheet Core
Not used in final design
Not used in final design
56
KDL-32XBR4/40D3000
KDL-32XBR4/40D3000
KDL-40D3000 ONLY
D1 BOARD AND INVERTER BOARD CAUTION
MAKE SURE COLOR of UL tape is the
correct color (YELLOW) for harness.
Confirm wires are dressed properly in clips.
correct color (YELLOW) for harness.
Confirm wires are dressed properly in clips.
Confirm 2P BD Connectors are FULLY
LOCKED by pressing on BOTH locking
tabs (RED ARROWS).
LOCKED by pressing on BOTH locking
tabs (RED ARROWS).
MARK the 2P BD Connector Housing with
"CHECKED" Mark or Stamping.
"CHECKED" Mark or Stamping.
OPERATION PROCESS
D1-
Bd
1
!
!
CAUTION:
CABLE HAS POLARITY!
YELLOW UL TAPE CONNECT TO INVERTER
BLACK UL TAPE CONNECT TO D1-Bd
YELLOW UL TAPE CONNECT TO INVERTER
BLACK UL TAPE CONNECT TO D1-Bd
USE JIG/MARKER TO CONFIRM
CONNECTOR IS LOCKED
CONNECTOR IS LOCKED
PRESS HERE TO CONFIRM
CONNECTOR IS LOCKED
CONNECTOR IS LOCKED
CAUTION 2:
MAKE SURE CABLE INSULATION
IS NOT TRAPPED UNDER CONNECTOR
FOR BOTH D1 & INVERTER PWB.
IS NOT TRAPPED UNDER CONNECTOR
FOR BOTH D1 & INVERTER PWB.
Click on the first or last page to see other KDL-32XBR4 / KDL-40D3000 service manuals if exist.