Sony HDR-SR5 / HDR-SR5C / HDR-SR5E / HDR-SR7 / HDR-SR7E / HDR-SR8 / HDR-SR8E (serv.man4) Service Manual ▷ View online
6-16
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
4.
VIDEO Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. S VIDEO OUT Y Level Adj.
3. S VIDEO OUT Chroma Level Adj.
4. VIDEO OUT Level Check
5. COMPONENT OUT Y Level Adj.
6. COMPONENT OUT Pb Level Adj.
7. COMPONENT OUT Pr Level Adj.
8. Release of Data Setting during Video Adj.
sequence]
1. Data Setting during Video Adj.
2. S VIDEO OUT Y Level Adj.
3. S VIDEO OUT Chroma Level Adj.
4. VIDEO OUT Level Check
5. COMPONENT OUT Y Level Adj.
6. COMPONENT OUT Pb Level Adj.
7. COMPONENT OUT Pr Level Adj.
8. Release of Data Setting during Video Adj.
[Adjusting method]
1) Click the [Start] button of the VIDEO Adjustment.
2) The Automatic Adjustment Program executes the “1. Data
1) Click the [Start] button of the VIDEO Adjustment.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Video Adj.”.
3) If “1. Data Setting during Video Adj.” completed successfully,
the following screen is displayed during the execution of “2. S
VIDEO OUT Y Level Adj.”. Using the [Up]/[Down] button on
the screen, adjust so that the Y signal level satisfies the speci-
fied value. After the adjustment, click the [End] button in the
screen.
VIDEO OUT Y Level Adj.”. Using the [Up]/[Down] button on
the screen, adjust so that the Y signal level satisfies the speci-
fied value. After the adjustment, click the [End] button in the
screen.
4) After that, the following screen is displayed during the execu-
tion of “3. S VIDEO OUT Chroma Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Cr signal level
and the Cb signal level satisfies the specified value. After the
adjustment, check that the burst level of the chroma signals
satisfies the specified value, and click the [End] button in the
screen.
[Down] button on the screen, adjust so that the Cr signal level
and the Cb signal level satisfies the specified value. After the
adjustment, check that the burst level of the chroma signals
satisfies the specified value, and click the [End] button in the
screen.
5) If the [End] button is clicked, “4. VIDEO OUT Level Check”
will be executed. The following message and screen are dis-
played. Check that the sync signal level and burst level of the
video signals satisfies the specified value, and click the [OK]
button in the message.
played. Check that the sync signal level and burst level of the
video signals satisfies the specified value, and click the [OK]
button in the message.
6-17
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
6) After that, the following screen is displayed during the execu-
tion of “5. COMPONENT OUT Y Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Y signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Y signals satisfies the specified value, and
click the [End] button in the screen.
[Down] button on the screen, adjust so that the Y signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Y signals satisfies the specified value, and
click the [End] button in the screen.
7) After that, the following screen is displayed during the execu-
tion of “6. COMPONENT OUT Pb Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pb signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pb signals satisfies the specified value,
and click the [End] button in the screen.
[Down] button on the screen, adjust so that the Pb signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pb signals satisfies the specified value,
and click the [End] button in the screen.
8) After that, the following screen is displayed during the execu-
tion of “7. COMPONENT OUT Pr Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pr signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pr signals satisfies the specified value,
and click the [End] button in the screen.
[Down] button on the screen, adjust so that the Pr signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pr signals satisfies the specified value,
and click the [End] button in the screen.
9) If the [End] button is clicked, “8. Release of Data Setting dur-
ing Video Adj.” will be executed.
10) Upon successful completion of all item the VIDEO Adjust-
ment, the following message is displayed. Click the [OK] but-
ton.
ton.
6-18
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
1-7.
CAMERA SYSTEM ADJUSTMENTS
1.
Function of Each Button on Camera System
Adjustment Screen
Adjustment Screen
Click the [CAMERA SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-14 will appear.
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-14 will appear.
Fig. 6-1-14
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Initialization of EEPROM Data] button
The “INITIALIZATION OF EEPROM DATA” screen appears.
The “INITIALIZATION OF EEPROM DATA” screen appears.
3
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
4
[Start] button
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 8” starts.
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 8” starts.
5
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
5
4
4
3
2
1
3
4
6-19
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
Block
Page
Address
11
80
0F00 to 0FFF, 6300 to 6FFF
11
80
7C00 to 7CFF, 7E00 to 7F7F
(Note 1 only)
(Note 1 only)
STEADY HALL Adj.
(Note 1 only)
(Note 1 only)
11
80
7F04 to 7F0F
HALL Adj.
11
80
69D0 to 69D8
MR Adj.
11
80
6F30, 6F40 to 6F4F
Differential Gain Adj.
Clear chart (All White)
(Shoot the clear chart with the zoom TELE
end.)
(Shoot the clear chart with the zoom TELE
end.)
11
80
6E00 to 6EB3
Siemens star chart with ND filter for
minipattern box (Note 3) or
Flange back adjustment jig
minipattern box (Note 3) or
Flange back adjustment jig
Flange back adjustment chart and
subject more than 500 m away
subject more than 500 m away
CAMERA
Adjustment 3
Adjustment 3
Flange Back Check
Siemens star chart
-
-
-
F No. & ND Light Quality
Standard Data Input
Standard Data Input
11
80
69E0 to 69EF
Mechanical Shutter Adj.
11
80
69B0 to 69B5, 6F7A to 6F7F
Linear Matrix Adj.
11
80
69BE to 69CF, 6F60 to 6F71,
6FC8 to 6FEB
6FC8 to 6FEB
AWB Standard Data Input
11
80
6F88 to 6F97, 6FF0 to 6FF7
LV Standard Data Input
11
80
69DC, 69DD
AWB Adj.
Clear chart (All White frame)
Filter C14 for color temperature correction
Filter C14 for color temperature correction
11
80
6F84 to 6F87, 6F98 to 6FA7,
6FF8 to 6FFF
6FF8 to 6FFF
AWB Check
Clear chart (All White frame)
ND filter 1.0, 0.4 and 0.1
ND filter 1.0, 0.4 and 0.1
-
-
-
Color Reproduction Adj. &
Check (Indoor HD)
Check (Indoor HD)
11
80
6FA8 to 6FB7
Color Reproduction Check
(Indoor SD)
(Indoor SD)
-
-
-
Color Reproduction Check
(Outdoor HD, Outdoor SD)
(Outdoor HD, Outdoor SD)
Color bar chart
(Color reproduction adjustment frame)
Filter C14 for color temperature correction
(Color reproduction adjustment frame)
Filter C14 for color temperature correction
-
-
-
MAX GAIN Adj.
Clear chart (Center frame)
11
80
69DE
HS White Defect Adj.
11
87
0E50 to 0EC7
White Defect Adj.
11
87
0200 to 0DFF
White Defect Adj.
(FD white point)
(FD white point)
11
87
0E26 to 0E37, 0F2A to 0F3B,
0F7E to 0F8F, 0FD2 to 0FE3
0F7E to 0F8F, 0FD2 to 0FE3
White Defect Check
-
-
-
Black Defect Adj.
Clear chart (All White)
(Shoot the clear chart with the zoom TELE
end.)
(Shoot the clear chart with the zoom TELE
end.)
11
87
0E00 to 0E25, 0F00 to 0F29,
0F54 to 0F7D, 0FA8 to 0FD1,
0FFC to 0FFF
0F54 to 0F7D, 0FA8 to 0FD1,
0FFC to 0FFF
Strobe Light Level Adj.
11
80
69B8 to 69BD
Strobe White Balance Adj.
11
80
6F80, 6F81
CAMERA
Adjustment 7
Adjustment 7
Steady Shot Check
(Note 2 only)
(Note 2 only)
Not required
-
-
-
CAMERA
Adjustment 8
Adjustment 8
GYRO Sensor Sensitivity Adj.
(Note 1 only)
(Note 1 only)
Not required
11
80
7F12, 7F13
Flash adjustment box
Not required
Clear chart (All White frame)
Color bar chart
(Color reproduction adjustment frame)
(Color reproduction adjustment frame)
Adjusting Address
11
Button Name
Adjustment
Subject
6F20 to 6F3F
CAMERA
Adjustment 1
Adjustment 1
Not required
Initialization of
EEPROM Data
EEPROM Data
CAMERA
Adjustment 2
Adjustment 2
Initialization of EEPROM data
Not required
CAMERA
Adjustment 4
Adjustment 4
CAMERA
Adjustment 5
Adjustment 5
Flange Back Adj.
80
Not required
CAMERA
Adjustment 6
Adjustment 6
2.
Adjustment Items of Camera System Adjustment
The adjustment items of camera system adjustment are as listed in
Table 6-1-4. The Automatic Adjustment Program divides the ad-
justment items into eight, camera adjustment 1-8. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
Table 6-1-4. The Automatic Adjustment Program divides the ad-
justment items into eight, camera adjustment 1-8. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
Table 6-1-4
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Note 1:
HDR-SR7/SR7E/SR8/SR8E only
Note 2:
HDR-SR5/SR5C/SR5E only
Note 3:
Dark Siemens star chart.
Click on the first or last page to see other HDR-SR5 / HDR-SR5C / HDR-SR5E / HDR-SR7 / HDR-SR7E / HDR-SR8 / HDR-SR8E (serv.man4) service manuals if exist.