Sony HDR-SR5 / HDR-SR5C / HDR-SR5E / HDR-SR7 / HDR-SR7E / HDR-SR8 / HDR-SR8E (serv.man4) Service Manual ▷ View online
6-8
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
4.
Setting of Adjustment Mode
Before performing the adjustment, “Setting of Adjustment Mode”
is required.
is required.
[Setting method]
1) Connect the Camcorder to the PC with a USB cable, and turn
1) Connect the Camcorder to the PC with a USB cable, and turn
on the power switch.
2) The USB SELECT menu will appear on the LCD screen of
the Camcorder, and then select “COMPUTER” to establish
the connection.
the connection.
3) Start the Automatic Adjustment Program, and click the [Con-
nect] button on the Main Menu screen.
4) When the following message is displayed, turn off and on again
the power switch of the Camcorder.
Note:
Turning off and on the power switch causes the
Camcorder to be switched to the Adjustment Mode.
After the Camcorder restarted, click the [OK] button in
the message window.
Camcorder to be switched to the Adjustment Mode.
After the Camcorder restarted, click the [OK] button in
the message window.
5) Upon successful completion of the settings in the Adjustment
Mode, the operation of each button on the Main Menu screen
is enabled.
is enabled.
5.
Release of Adjustment Mode
To finish the adjustment, be sure to perform “Release of Adjust-
ment Mode”.
ment Mode”.
[Releasing method]
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
ment mode has completed. Click the [OK] button in the mes-
sage window to exit the Automatic Adjustment Program.
sage window to exit the Automatic Adjustment Program.
Note:
The Camcorder switches to the normal mode by turn-
ing off and on the power switch. After the adjustment
finished, turn off and on again the power switch of the
Camcorder to confirm that the USB SELECT menu is
displayed.
ing off and on the power switch. After the adjustment
finished, turn off and on again the power switch of the
Camcorder to confirm that the USB SELECT menu is
displayed.
6-9
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
1-3.
HDD SYSTEM ADJUSTMENTS
When the HDD is replaced, the following VBScript files are used.
The Automatic Adjustment Program (HDR-SR7 Series Auto-Adj
Ver 1.[]r[][].exe) is not used.
• CheckHDDError.vbe
The Automatic Adjustment Program (HDR-SR7 Series Auto-Adj
Ver 1.[]r[][].exe) is not used.
• CheckHDDError.vbe
• SetFactoryCheckDefault.vbe
• SetFactoryCheckFull.vbe
• ExecAfterFactoryCheck.vbe
For the VBScript files ([][][][][][][].vbe), the program is executed
by double-clicking the file.
by double-clicking the file.
Note:
The VBScript files can only be used on the PC in which the
SeusEX is installed.
SeusEX is installed.
6-10
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
Message is checked
When message is
“No Error”
“No Error”
When message is
“Error Detected”
“Error Detected”
Is replacement HDD new one?
No
Reused HDD
Reused HDD
Yes
New HDD
New HDD
Connect the camcorder to the PC
with a USB cable, and turn on the
power switch.
with a USB cable, and turn on the
power switch.
Turn off the power of camcorder.
Turn off the power and turn on again.
Turning on the power of camcorder
will start automatic Factory Check.
Wait until Factory Check completed. (Note)
[EST. PROCESS TIME]
Default: 6 min.
Full:
Full:
1 hour 58 min.
Replace the HDD.
The USB SELECT menu will appear
on the LCD screen of the camcorder,
and the select “COMPUTER” to
establish the connection.
on the LCD screen of the camcorder,
and the select “COMPUTER” to
establish the connection.
“Manegement file damaged.
Create new file?” will appear
on the LCD screen of the camcorder,
and the select [YES].
Create new file?” will appear
on the LCD screen of the camcorder,
and the select [YES].
Execte the “CheckHDDError.vbe”.
(Double-click the file.)
(Double-click the file.)
Execte the
“SetFactoryCheckDefault.vbe”.
(Double-click the file.)
“SetFactoryCheckDefault.vbe”.
(Double-click the file.)
Wait until “JOB Success”
message is displayed
(several seconds)
message is displayed
(several seconds)
Wait until “JOB Success”
message is displayed
(several seconds)
message is displayed
(several seconds)
Wait until “JOB Success”
message is displayed
(several seconds)
message is displayed
(several seconds)
Execte the
“SetFactoryCheckFull.vbe”.
(Double-click the file.)
“SetFactoryCheckFull.vbe”.
(Double-click the file.)
Execte the
“ExecAfterFactoryCheck.vbe”.
(Double-click the file.)
“ExecAfterFactoryCheck.vbe”.
(Double-click the file.)
Replacing the HDD is unneccessary.
Start
End
1.
HDD Replacing Procedure
Note:
During the execution of Factory Check, the LCD screen of
the camcorder becomes gray.
When the Factory Check finished, the LCD screen changes
as follows:
the camcorder becomes gray.
When the Factory Check finished, the LCD screen changes
as follows:
When Factory Check is OK: Camera image display
When Factory Check is NG: Blue display
When Factory Check is NG: Blue display
6-11
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
1-4.
DESTINATION DATA WRITE
Note:
The DESTINATION DATA WRITE can be set with the
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
1.
Function of Each Button on Destination Data Write
Screen
Screen
Click the [DESTINATION DATA WRITE] button on the Main
Menu screen, and the “DESTNATION DATA WRITE” screen
in Fig. 6-1-10 will appear.
Menu screen, and the “DESTNATION DATA WRITE” screen
in Fig. 6-1-10 will appear.
Fig. 6-1-10
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
Model Name List
Selects the model name.
Selects the model name.
3
Destination List
Selects the written destination.
Selects the written destination.
4
[Data Write] button
Write the destination data to the camcorder.
Write the destination data to the camcorder.
2.
Destination Data Write
[Writing method]
1) Select the model name with the Model Name List.
1) Select the model name with the Model Name List.
2) Select the written destination with the Destination List.
3) Click the [Data Write] button.
4) The writing finishes when the following message is displayed.
1
2
3
4
Click on the first or last page to see other HDR-SR5 / HDR-SR5C / HDR-SR5E / HDR-SR7 / HDR-SR7E / HDR-SR8 / HDR-SR8E (serv.man4) service manuals if exist.