Sony HDR-SR5 / HDR-SR5C / HDR-SR5E / HDR-SR7 / HDR-SR7E / HDR-SR8 / HDR-SR8E (serv.man4) Service Manual ▷ View online
6-12
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
Table 6-1-2
3.
Selectable Language Table
English
Japanese
French
Italian
German
Spanish
Dutch
Russian
Simplified Chinese
Portuguese
Greek
Braz.Portuguese
Canadian French
Espanyol
Traditional Chinese
Korean
Simplified English
Arabic
Persian
Thai
Turkish
Polish
Czech
Hungarian
Indonesia
Melayu
J1
J
z
U2
US
z
a
a
a
a
E23
E
z
a
a
a
a
a
a
KR2
KR
a
a
a
a
a
z
a
JE3
JE
z
a
a
a
a
a
a
CA2
CND
z
a
a
a
a
a
a
E34
E
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
HK1
HK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
AU2
AUS
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CN2
CH
a
a
a
a
a
a
a
z
a
a
a
a
a
a
a
a
a
JE3
JE
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEN
AEP
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEH
UK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
z
: INITIAL LANGUAGE
PAL model
DSTINATION
SELECTABLE LANGUAGE
NTSC model
AREA
6-13
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
1-5.
USB SERIAL No. INPUT
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model name)
and SERIAL No. into the screen and write them.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model name)
and SERIAL No. into the screen and write them.
1.
Function of Each Button on USB Serial No. Input
Screen
Screen
Click the [USB SERIAL No. INPUT] button on the Main Menu screen,
and the “USB SERIAL No. INPUT” screen in Fig. 6-1-11 will
appear.
and the “USB SERIAL No. INPUT” screen in Fig. 6-1-11 will
appear.
Fig. 6-1-11
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
Display area
The “PRODUCT ID”, “SERIAL No.” and “ASCII TRANS-
LATION” are displayed.
For the “ASCII TRANSLATION”, the last 5 characters of
model name are displayed if the PRODUCT ID is set from the
model name in the MANUAL WRITE. For the PRODUCT ID
set in the factory, the model name is not displayed but “?” etc.
will be displayed.
The “PRODUCT ID”, “SERIAL No.” and “ASCII TRANS-
LATION” are displayed.
For the “ASCII TRANSLATION”, the last 5 characters of
model name are displayed if the PRODUCT ID is set from the
model name in the MANUAL WRITE. For the PRODUCT ID
set in the factory, the model name is not displayed but “?” etc.
will be displayed.
3
[Check Serial] button
The USB SERIAL No. data is read from the camera and dis-
played in the display area.
The USB SERIAL No. data is read from the camera and dis-
played in the display area.
4
[Read and Save] button
The USB SERIAL No. data is read from the camera and saved
in PC as a file.
The USB SERIAL No. data is read from the camera and saved
in PC as a file.
5
[Load and Write] button
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camera.
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camera.
6
Input area
Enter “PRODUCT ID” and “SERIAL No.” when writing the
ID for service.
The “PRODUCT ID” is set from the last 5 characters of model
name if the model name is selected.
For the “SERIAL No.”, read it from the label on the camera
body and enter it.
Enter “PRODUCT ID” and “SERIAL No.” when writing the
ID for service.
The “PRODUCT ID” is set from the last 5 characters of model
name if the model name is selected.
For the “SERIAL No.”, read it from the label on the camera
body and enter it.
7
[Write Manually] button
The USB SERIAL No. data entered in the input area is written
to the camera.
The USB SERIAL No. data entered in the input area is written
to the camera.
5
3
4
2
7
6
1
6-14
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
1-6.
VIDEO SYSTEM ADJUSTMENTS
1.
Function of Each Button on Video System Adjust-
ment Screen
ment Screen
Click the [VIDEO SYSTEM ADJUSTMENT] button on the Main Menu
screen, and the “VIDEO SYSTEM ADJUSTMENT” screen in Fig.
6-1-12 will appear.
screen, and the “VIDEO SYSTEM ADJUSTMENT” screen in Fig.
6-1-12 will appear.
Fig. 6-1-12
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
3
[Start] button
“Video Adjustment” starts.
“Video Adjustment” starts.
4
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
2.
Adjustment Items of VIDEO System Adjustment
The adjustment items of video system adjustment are as listed in
Table 6-1-3. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Table 6-1-3. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Note:
The Automatic Adjustment Program does not support.
Table 6-1-3
4
3
2
1
Block
Page
Address
(Note)
Origin Oscillation
Check
Check
R1316 (Pin K5 of IC1301 (CHCK))
on VC-504 board
on VC-504 board
Frequency
counter
counter
-
-
-
S VIDEO OUT Y
Level Adj.
Level Adj.
Y signal terminal of S VIDEO plug of
A/V jack (75 ohm terminated)
A/V jack (75 ohm terminated)
Oscilloscope
10
60
4400
S VIDEO OUT
Chroma Level Adj.
Chroma Level Adj.
Chroma signal terminal of S VIDEO
plug of A/V jack (75 ohm terminated)
plug of A/V jack (75 ohm terminated)
Oscilloscope
10
60
4401, 4402
VIDEO OUT Level
Check
Check
VIDEO terminal of A/V jack (75 ohm
terminated)
terminated)
Oscilloscope
-
-
-
COMPONENT OUT
Y Level Adj.
Y Level Adj.
Y signal terminal of COMPONENT
OUT jack (75 ohm terminated)
OUT jack (75 ohm terminated)
Oscilloscope
10
60
4410
COMPONENT OUT
Pb Level Adj.
Pb Level Adj.
Pb signal terminal of COMPONENT
OUT jack (75 ohm terminated)
OUT jack (75 ohm terminated)
Oscilloscope
10
60
4411
COMPONENT OUT
Pr Level Adj.
Pr Level Adj.
Pr signal terminal of COMPONENT
OUT jack (75 ohm terminated)
OUT jack (75 ohm terminated)
Oscilloscope
10
60
4412
Button
Name
Adjustment
Measurement Point
Measuring
Instrument
Adjusting Address
VIDEO
Adjustment
Adjustment
6-15
HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ
3.
Origin Oscillation Check
Check the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color
will become inconsistent.
If deviated, the synchronization will be disrupted and the color
will become inconsistent.
Subject
Not required
Measurement Point
R1316 (Pin K5 of IC1301 (CHCK))
on VC- 504 board
on VC- 504 board
Measuring Instrument
Frequency counter
Specified value
f = 40459541
± 809 Hz (SR5/SR5C)
f = 44505494
± 890 Hz (SR7/SR8)
f = 31185000
± 624 Hz (SR5E)
f = 37125000
± 743 Hz (SR7E/SR8E)
Switch setting
1) POWER ............................................................. MOVIE mode
1) POWER ............................................................. MOVIE mode
Checking method:
1) Check that the frequency (f) satisfies the specified value.
1) Check that the frequency (f) satisfies the specified value.
Fig. 6-1-13
R1316
IC1301
VC-504 BOARD (SIDE A)
Click on the first or last page to see other HDR-SR5 / HDR-SR5C / HDR-SR5E / HDR-SR7 / HDR-SR7E / HDR-SR8 / HDR-SR8E (serv.man4) service manuals if exist.